transition to nixos stable

.gitignore

@@ -0,0 +1 @@
+.vscode/settings.json

.sops.yaml

@@ -0,0 +1,13 @@
+keys:
+  - users:
+    - &andreas age19j24x89dfh4f7v58c8k64yupqas4f7qkkyper7yj9dd7vqwvvq0qkyvhxk # generated using cli
+  - hosts:
+    - &th0nkpad-nixos age1ma8x6wugvc40mkst33mejq0m6r44jk6zwjjun3znyer5nztgn9vs0nwjx4 # derived from ssh host key
+    - &drivebystation-nix age1s5qwsuc3e4m3c4w5hl6tyja70w273gr60j9j9dcpc6mz69lemg3qpwud3h #derived from ssh host key
+creation_rules:
+ - path_regex: secrets.yaml$
+   key_groups:
+   - age:
+     - *andreas
+     - *th0nkpad-nixos
+     - *drivebystation-nix

.vscode/tasks.json

@@ -0,0 +1,21 @@
+{
+    // See https://go.microsoft.com/fwlink/?LinkId=733558
+    // for the documentation about the tasks.json format
+    "version": "2.0.0",
+    "tasks": [
+        {
+            "type": "shell",
+            "label": "nixos-rebuild",
+            "command": "bash",
+            "args": [
+                "-c",
+                "sudo nixos-rebuild switch --flake ."
+            ],
+            "problemMatcher": [],
+            "group": {
+                "kind": "build",
+                "isDefault": true
+            }
+        }
+    ]
+  }

AGENTS.md

@@ -0,0 +1,102 @@
+## CODE GENERATION INSTRUCTIONS
+
+You are tasked with integrating patches into my kernel to make the tearing protocol work on Wayland with my intel B580. 
+
+## THINGS TO DO:
+
+Plan out how you're going to do the following. I will inspect your plan and then authorize it.
+
+- Custom build this MR: https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3797
+
+- Fix KDE tearing on Intel Graphics using kernel patches for libdrm. Use these resources to research:
+    - https://bugs.kde.org/show_bug.cgi?id=520549
+    - https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/8597#note_3567675
+    - https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/13834 (this one has patches that supposedly fix the problem.)
+
+
+# Plan here:
+
+- [ ] 1. Record the current package and kernel baselines.
+  - Evaluate the locked versions of Mutter, GNOME Shell, libdrm, and the selected CachyOS kernel.
+  - Confirm that the Intel Arc B580 (`8086:e20b`) is using the `xe` driver.
+  - Save the current working kernel and NixOS generation as the rollback baseline.
+
+- [ ] 2. Pin all experimental upstream sources.
+  - Pin Mutter merge request !3797 to a specific commit instead of following its branch.
+  - Record the MR base commit and verify whether it is compatible with the Mutter version in the locked nixpkgs input.
+  - Identify the exact revisions of the Intel async-flip and `IN_FORMATS_ASYNC` kernel patches referenced by the i915 and Xe work items.
+  - Use fixed-output hashes for every fetched patch or source archive.
+
+- [ ] 3. Determine which Intel DRM patches are still required.
+  - Inspect the selected CachyOS kernel source for patches that have already been merged or backported.
+  - Select only the missing patches needed to expose async-capable formats and prevent unchanged or disabled planes from incorrectly rejecting an async atomic commit.
+  - Confirm that the selected changes affect the Intel display code shared by `xe` and `i915`, and therefore apply to the B580 even when the original report is filed under i915.
+  - Document the required patch order and each patch's upstream URL and revision.
+
+- [ ] 4. Add a dedicated, reversible Wayland-tearing overlay or module.
+  - Keep the experimental Mutter and kernel overrides together in a new, clearly named repository file.
+  - Scope the override to `drivebystation-nix` where practical.
+  - Provide a single enable switch or isolated import so the experiment can be disabled without editing generated hardware configuration.
+  - Preserve all unrelated existing worktree changes.
+
+- [ ] 5. Override Mutter with merge request !3797.
+  - Prefer applying the pinned MR commits to the nixpkgs Mutter derivation so nixpkgs build flags and dependency wiring are retained.
+  - If the patch series is incompatible, use the pinned MR source only after confirming its Mutter ABI matches the installed GNOME Shell.
+  - Verify that libdrm is at least version 2.4.120.
+  - Ensure GNOME Shell and the display-manager session reference the overridden Mutter rather than merely installing it alongside the stock package.
+  - Enable the experimental feature with `MUTTER_DEBUG_EXPERIMENTAL_FEATURES=tearing` in the session environment.
+
+- [ ] 6. Override the CachyOS kernel with the selected Intel DRM patches.
+  - Extend the existing `pkgs.cachyosKernels.linuxPackages-cachyos-latest` kernel derivation rather than replacing it with an unrelated kernel package set.
+  - Apply the pinned patches in their upstream dependency order.
+  - Verify that every patch applies cleanly to the exact CachyOS kernel source.
+  - Keep `boot.extraModulePackages` tied to the patched kernel package set so `r8125` and `v4l2loopback` are rebuilt against the correct kernel.
+  - Do not modify the generated `hardware-configuration.nix` beyond any unavoidable existing kernel selection; place the override in a maintained host module.
+
+- [ ] 7. Validate the Nix expressions without activating the system.
+  - Run formatting and syntax checks on every changed Nix file.
+  - Evaluate the complete `drivebystation-nix` configuration.
+  - Run `nix flake check` and resolve evaluation failures attributable to these changes.
+  - Confirm that all sources are pinned and reproducible and that no mutable branch names remain.
+
+- [ ] 8. Build each risky component independently.
+  - Build the overridden Mutter derivation.
+  - Build the patched kernel derivation.
+  - Build the matching `r8125` and `v4l2loopback` modules.
+  - Inspect the build logs for rejected patches, warnings related to async flips, and ABI mismatches.
+
+- [ ] 9. Build the complete NixOS system before switching.
+  - Build the `drivebystation-nix` toplevel without activating it.
+  - Verify that the closure contains the pinned patched Mutter and patched CachyOS kernel.
+  - Confirm that a previous known-good boot generation remains available.
+
+- [ ] 10. Activate the result safely.
+  - Use `nixos-rebuild boot` first so the new system is selected only after reboot.
+  - Reboot into the patched generation and verify the running kernel version and `xe` driver binding.
+  - If the display fails or the system is unstable, boot the previous generation and disable the experimental module.
+
+- [ ] 11. Verify the kernel DRM capabilities.
+  - Run `drm_info` and confirm atomic async-page-flip capability is reported.
+  - Confirm `IN_FORMATS_ASYNC` is populated for supported primary planes.
+  - Confirm its absence on the cursor plane is handled as expected rather than causing the entire commit to fail.
+  - Capture a DRM debug log while submitting tearing-enabled fullscreen frames.
+
+- [ ] 12. Test KDE Plasma tearing.
+  - Enable Plasma's "Allow in fullscreen windows" tearing setting.
+  - Run a fullscreen tearing-aware game or test client with frame rate above the monitor refresh rate.
+  - Confirm that KWin's async atomic commits no longer fail with `-EINVAL`.
+  - Confirm that the previous `cursor A: async flip not supported` and `plane 2A: async flip not supported` errors no longer occur for disabled or unchanged planes.
+  - Check cursor movement, fullscreen entry and exit, direct scanout, VRR enabled and disabled, and all connected monitors.
+
+- [ ] 13. Test GNOME Mutter tearing.
+  - Start a GNOME Wayland session and confirm the tearing-control protocol is advertised.
+  - Run `weston-simple-egl -v -f -t` or an equivalent tearing-aware client.
+  - Confirm that requested asynchronous flips are accepted and visibly tear when the frame rate exceeds the refresh rate.
+  - Confirm unsupported async commits fall back to synchronized presentation without breaking the session.
+  - Test cursor movement, fullscreen transitions, VRR, multiple monitors, and suspend/resume.
+
+- [ ] 14. Document results and removal criteria.
+  - Record the tested hardware, kernel, Mutter, GNOME Shell, Plasma, and libdrm versions.
+  - Record the exact patches used and the outcome of both compositor tests.
+  - Document how to disable the overrides and roll back to the previous generation.
+  - Note which upstream merge or kernel release will allow each local override to be removed.

README.md

@@ -0,0 +1,61 @@
+# NixOS configuration
+
+The default package set is NixOS 26.05. Home Manager and AAGL use their
+matching 26.05 release branches. `drivebystation-nix` uses the standard
+`pkgs.linuxPackages` kernel from stable, including matching external modules.
+
+## Packages from unstable
+
+`inputs.nixpkgs-unstable` is a separate package set, pinned in `flake.lock`.
+Select individual applications explicitly, as with Trilium and JetBrains
+Toolbox in the desktop host:
+
+```nix
+unstablePkgs.trilium-desktop
+```
+
+The host defines `unstablePkgs` by importing the separate input with
+`allowUnfree = true`. Use `pkgs.<name>` for stable packages. Unstable
+applications retain their own dependencies; the system package set stays on
+stable.
+
+Update the stable inputs and the application exceptions independently:
+
+```sh
+nix flake update nixpkgs home-manager aagl
+nix flake update nixpkgs-unstable
+```
+
+The existing Mutter tearing override remains experimental. Its compatibility
+and B580 graphics behavior require testing when changing the desktop stack.
+
+## Validate and boot
+
+```sh
+nix build .#nixosConfigurations.drivebystation-nix.config.system.build.toplevel --no-link
+sudo nixos-rebuild boot --flake .#drivebystation-nix
+```
+
+Only run the boot command after the build succeeds. Keep the previous working
+generation available in the boot menu, then test networking, graphics, and
+the webcam loopback after reboot. Git restores configuration sources; booting
+the previous generation restores the previous system closure.
+
+Whole-flake checks currently also evaluate an unfinished WSL host referencing
+the disabled `nixos-wsl` input. Validate the desktop target directly until that
+separate host configuration is repaired.
+
+## Migration validation (2026-10-17)
+
+The complete `drivebystation-nix` system built successfully without activation.
+Its closure contains Linux 6.18.56, patched Mutter 50.5, GNOME Shell 50.5,
+libdrm 2.4.133, r8125 9.016.01, and v4l2loopback 0.15.3. The explicit unstable
+applications are Trilium 0.106.0 and JetBrains Toolbox 3.8.1.88030.
+
+Nix syntax and Git whitespace checks pass. `nix flake check --no-build` stops
+at the existing WSL input error described above. The edited Nix files retain
+the repository's existing formatting; `nixpkgs-fmt --check` reports formatting
+differences, including on the original flake before migration.
+
+Boot, networking, B580 graphics, and tearing behavior still require runtime
+testing. The migration does not add Intel tearing kernel patches.

flake.lock

@@ -1,13 +1,140 @@
 {
   "nodes": {
+    "Catch2": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1759222471,
+        "narHash": "sha256-7Dx7PhtRwkbo8vHF57sAns2fQZ442D3cMyCt25RvzJc=",
+        "owner": "catchorg",
+        "repo": "Catch2",
+        "rev": "b3fb4b9feafcd8d91c5cb510a4775143fdbef02f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "catchorg",
+        "repo": "Catch2",
+        "rev": "b3fb4b9feafcd8d91c5cb510a4775143fdbef02f",
+        "type": "github"
+      }
+    },
+    "MimeTypes": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1577040615,
+        "narHash": "sha256-biRcxbpRVnD3+VVo0fNrNGeAi1P7pSzkGKHZrTtGp7Q=",
+        "owner": "lasselukkari",
+        "repo": "MimeTypes",
+        "rev": "8990d6a796bd9904ec3d41e5c150a1ffb48fe32e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "lasselukkari",
+        "repo": "MimeTypes",
+        "rev": "8990d6a796bd9904ec3d41e5c150a1ffb48fe32e",
+        "type": "github"
+      }
+    },
+    "SPIRV-Cross-WallpaperEngine": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1745093314,
+        "narHash": "sha256-ou66paGlu3KXf8LL8zfTiE8wOf0nRBocDs1QvfRVs+k=",
+        "owner": "Almamu",
+        "repo": "SPIRV-Cross-WallpaperEngine",
+        "rev": "ad4d02220b01c1800e5a4e6671d6d8ca8ab07783",
+        "type": "github"
+      },
+      "original": {
+        "owner": "Almamu",
+        "repo": "SPIRV-Cross-WallpaperEngine",
+        "rev": "ad4d02220b01c1800e5a4e6671d6d8ca8ab07783",
+        "type": "github"
+      }
+    },
+    "aagl": {
+      "inputs": {
+        "flake-compat": "flake-compat",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "rust-overlay": "rust-overlay"
+      },
+      "locked": {
+        "lastModified": 1789138195,
+        "narHash": "sha256-cvK9QXAzcgYYg6WsMSfzSE78QyCbNoRMF25GIZ0pz1s=",
+        "owner": "ezKEa",
+        "repo": "aagl-gtk-on-nix",
+        "rev": "decd5655d94eec05b6d5beacb9a652f8ca95344e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "ezKEa",
+        "ref": "release-26.05",
+        "repo": "aagl-gtk-on-nix",
+        "type": "github"
+      }
+    },
+    "argparse": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1737934041,
+        "narHash": "sha256-gRLn4juxwde7ugvT/p4lx9ayDTm7o32NKaE/SEbnLHI=",
+        "owner": "p-ranav",
+        "repo": "argparse",
+        "rev": "d924b84eba1f0f0adf38b20b7b4829f6f65b6570",
+        "type": "github"
+      },
+      "original": {
+        "owner": "p-ranav",
+        "repo": "argparse",
+        "rev": "d924b84eba1f0f0adf38b20b7b4829f6f65b6570",
+        "type": "github"
+      }
+    },
+    "codex-desktop": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1791562553,
+        "narHash": "sha256-uyLpIxJv9lqy1pgGUd0C/RZvqWyFqbwR0Tq7E+UX0VM=",
+        "owner": "ilysenko",
+        "repo": "codex-desktop-linux",
+        "rev": "443cb5d52ed781cac6cc7083780abb058cf93678",
+        "type": "github"
+      },
+      "original": {
+        "owner": "ilysenko",
+        "repo": "codex-desktop-linux",
+        "type": "github"
+      }
+    },
+    "crane": {
+      "locked": {
+        "lastModified": 1781825982,
+        "narHash": "sha256-SlXKwIRIhrOSAcTjCB3ftPLzJWZStQIPS7J1FlZPnKk=",
+        "owner": "ipetkov",
+        "repo": "crane",
+        "rev": "469fd08d0bcf6926321fa973c6777fbc87785dd7",
+        "type": "github"
+      },
+      "original": {
+        "owner": "ipetkov",
+        "repo": "crane",
+        "type": "github"
+      }
+    },
     "flake-compat": {
       "flake": false,
       "locked": {
-        "lastModified": 1696426674,
-        "narHash": "sha256-kvjfFW7WAETZlt09AgDn1MrtKzP7t90Vf7vypd3OL1U=",
+        "lastModified": 1767039857,
+        "narHash": "sha256-vNpUSpF5Nuw8xvDLj2KCwwksIbjua2LZCqhV1LNRDns=",
         "owner": "edolstra",
         "repo": "flake-compat",
-        "rev": "0f9255e01c2351cc7d116c072cb317785dd33b33",
+        "rev": "5edf11c44bc78a0d334f6334cdaf7d60d732daab",
         "type": "github"
       },
       "original": {
@@ -19,37 +146,32 @@
     "flake-compat_2": {
       "flake": false,
       "locked": {
-        "lastModified": 1696426674,
-        "narHash": "sha256-kvjfFW7WAETZlt09AgDn1MrtKzP7t90Vf7vypd3OL1U=",
-        "owner": "edolstra",
+        "lastModified": 1767039857,
+        "narHash": "sha256-vNpUSpF5Nuw8xvDLj2KCwwksIbjua2LZCqhV1LNRDns=",
+        "owner": "NixOS",
         "repo": "flake-compat",
-        "rev": "0f9255e01c2351cc7d116c072cb317785dd33b33",
+        "rev": "5edf11c44bc78a0d334f6334cdaf7d60d732daab",
         "type": "github"
       },
       "original": {
-        "owner": "edolstra",
+        "owner": "NixOS",
         "repo": "flake-compat",
         "type": "github"
       }
     },
-    "flake-parts": {
-      "inputs": {
-        "nixpkgs-lib": [
-          "nix",
-          "nixpkgs"
-        ]
-      },
+    "flake-compat_3": {
+      "flake": false,
       "locked": {
-        "lastModified": 1719994518,
-        "narHash": "sha256-pQMhCCHyQGRzdfAkdJ4cIWiw+JNuWsTX7f0ZYSyz0VY=",
-        "owner": "hercules-ci",
-        "repo": "flake-parts",
-        "rev": "9227223f6d922fee3c7b190b2cc238a99527bbb7",
+        "lastModified": 1650374568,
+        "narHash": "sha256-Z+s0J8/r907g149rllvwhb4pKi8Wam5ij0st8PwAh+E=",
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "rev": "b4a34015c698c7793d592d66adbab377907a2be8",
         "type": "github"
       },
       "original": {
-        "owner": "hercules-ci",
-        "repo": "flake-parts",
+        "owner": "edolstra",
+        "repo": "flake-compat",
         "type": "github"
       }
     },
@@ -58,11 +180,11 @@
         "systems": "systems"
       },
       "locked": {
-        "lastModified": 1726560853,
-        "narHash": "sha256-X6rJYSESBVr3hBoH0WbKE5KvhPU5bloyZ2L4K60/fPQ=",
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
         "owner": "numtide",
         "repo": "flake-utils",
-        "rev": "c1dfcf08411b08f6b8615f7d8971a2bfa81d5e8a",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
         "type": "github"
       },
       "original": {
@@ -71,169 +193,262 @@
         "type": "github"
       }
     },
-    "git-hooks-nix": {
+    "flake-utils-plus": {
+      "inputs": {
+        "flake-utils": "flake-utils_2"
+      },
+      "locked": {
+        "lastModified": 1715533576,
+        "narHash": "sha256-fT4ppWeCJ0uR300EH3i7kmgRZnAVxrH+XtK09jQWihk=",
+        "owner": "gytis-ivaskevicius",
+        "repo": "flake-utils-plus",
+        "rev": "3542fe9126dc492e53ddd252bb0260fe035f2c0f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "gytis-ivaskevicius",
+        "repo": "flake-utils-plus",
+        "rev": "3542fe9126dc492e53ddd252bb0260fe035f2c0f",
+        "type": "github"
+      }
+    },
+    "flake-utils_2": {
+      "inputs": {
+        "systems": "systems_3"
+      },
+      "locked": {
+        "lastModified": 1694529238,
+        "narHash": "sha256-zsNZZGTGnMOf9YpHKJqMSsa0dXbfmxeoJ7xHlrt+xmY=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "ff7b65b44d01cf9ba6a71320833626af21126384",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "gitignore": {
       "inputs": {
-        "flake-compat": [
-          "nix"
-        ],
-        "gitignore": [
-          "nix"
-        ],
         "nixpkgs": [
-          "nix",
-          "nixpkgs"
-        ],
-        "nixpkgs-stable": [
-          "nix",
+          "lanzaboote",
+          "pre-commit",
           "nixpkgs"
         ]
       },
       "locked": {
-        "lastModified": 1721042469,
-        "narHash": "sha256-6FPUl7HVtvRHCCBQne7Ylp4p+dpP3P/OYuzjztZ4s70=",
-        "owner": "cachix",
-        "repo": "git-hooks.nix",
-        "rev": "f451c19376071a90d8c58ab1a953c6e9840527fd",
+        "lastModified": 1709087332,
+        "narHash": "sha256-HG2cCnktfHsKV0s4XW83gU3F57gaTljL9KNSuG6bnQs=",
+        "owner": "hercules-ci",
+        "repo": "gitignore.nix",
+        "rev": "637db329424fd7e46cf4185293b9cc8c88c95394",
         "type": "github"
       },
       "original": {
-        "owner": "cachix",
-        "repo": "git-hooks.nix",
+        "owner": "hercules-ci",
+        "repo": "gitignore.nix",
         "type": "github"
       }
     },
-    "libgit2": {
+    "glslang-WallpaperEngine": {
       "flake": false,
       "locked": {
-        "lastModified": 1715853528,
-        "narHash": "sha256-J2rCxTecyLbbDdsyBWn9w7r3pbKRMkI9E7RvRgAqBdY=",
-        "owner": "libgit2",
-        "repo": "libgit2",
-        "rev": "36f7e21ad757a3dacc58cf7944329da6bc1d6e96",
+        "lastModified": 1770589476,
+        "narHash": "sha256-auhYcTWdSERwujUqwfDbF61tncO18dwar3mMQ09VW1w=",
+        "owner": "Almamu",
+        "repo": "glslang-WallpaperEngine",
+        "rev": "b775500a153f5ceb0e4b6f366b79c4c57521bb62",
         "type": "github"
       },
       "original": {
-        "owner": "libgit2",
-        "ref": "v1.8.1",
-        "repo": "libgit2",
+        "owner": "Almamu",
+        "repo": "glslang-WallpaperEngine",
+        "rev": "b775500a153f5ceb0e4b6f366b79c4c57521bb62",
         "type": "github"
       }
     },
-    "nix": {
+    "home-manager": {
       "inputs": {
-        "flake-compat": "flake-compat",
-        "flake-parts": "flake-parts",
-        "git-hooks-nix": "git-hooks-nix",
-        "libgit2": "libgit2",
-        "nixpkgs": "nixpkgs",
-        "nixpkgs-23-11": "nixpkgs-23-11",
-        "nixpkgs-regression": "nixpkgs-regression"
+        "nixpkgs": [
+          "nixpkgs"
+        ]
       },
       "locked": {
-        "lastModified": 1728310575,
-        "narHash": "sha256-R13o8hNhzuTuEwUBViVOmT4OM0/I2d9DxnkxQOip1yg=",
-        "owner": "NixOS",
-        "repo": "nix",
-        "rev": "26c3fc11eada3fa7df0284190095868a947fefe2",
-        "type": "github"
-      },
-      "original": {
-        "id": "nix",
-        "type": "indirect"
-      }
-    },
-    "nixos-wsl": {
-      "inputs": {
-        "flake-compat": "flake-compat_2",
-        "flake-utils": "flake-utils",
-        "nixpkgs": "nixpkgs_2"
-      },
-      "locked": {
-        "lastModified": 1728299182,
-        "narHash": "sha256-wzxKH5DyG+uyhnGtP8YmN3LCYtEyYR/4fhjKVY2Rtxg=",
+        "lastModified": 1791938526,
+        "narHash": "sha256-yNYK2pdk3bCtJrpblrNYA6hZKdybWUeyTtx74+OEJFo=",
         "owner": "nix-community",
-        "repo": "NixOS-WSL",
-        "rev": "830b6a752d0097c2043985ff4c1203aba07b268d",
+        "repo": "home-manager",
+        "rev": "32904dfe1cf86039f3c8c9f41f94e1cfd76dbb34",
         "type": "github"
       },
       "original": {
         "owner": "nix-community",
-        "ref": "main",
-        "repo": "NixOS-WSL",
+        "ref": "release-26.05",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
+    "home-manager_2": {
+      "inputs": {
+        "nixpkgs": [
+          "zen-browser",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1788229478,
+        "narHash": "sha256-G0F2rFORVcFkEvVdE/qWQTnYekIc77YP5/vRF9nZlxU=",
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "rev": "1dc2d1f720ab17fc7981e087346bf54b26d284b1",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
+    "json": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1743872075,
+        "narHash": "sha256-eSqi4dhFrUvjYN+jD8nGqj1FbzGA6I2+eSqzdCGOLH8=",
+        "owner": "nlohmann",
+        "repo": "json",
+        "rev": "4424a0fcc1c7fa640b5c87d26776d99150dacd10",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nlohmann",
+        "repo": "json",
+        "rev": "4424a0fcc1c7fa640b5c87d26776d99150dacd10",
+        "type": "github"
+      }
+    },
+    "kissfft": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1739194969,
+        "narHash": "sha256-DywClnx67EE+CnduSuZIIfaAKbBg1ebQ+JgwIpDsnGQ=",
+        "owner": "mborgerding",
+        "repo": "kissfft",
+        "rev": "febd4caeed32e33ad8b2e0bb5ea77542c40f18ec",
+        "type": "github"
+      },
+      "original": {
+        "owner": "mborgerding",
+        "repo": "kissfft",
+        "rev": "febd4caeed32e33ad8b2e0bb5ea77542c40f18ec",
+        "type": "github"
+      }
+    },
+    "lanzaboote": {
+      "inputs": {
+        "crane": "crane",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "pre-commit": "pre-commit",
+        "rust-overlay": "rust-overlay_2"
+      },
+      "locked": {
+        "lastModified": 1782141370,
+        "narHash": "sha256-hqijVSEETttmo8Okql9/LG0Ua34hdciKW1a5zzlj8mU=",
+        "owner": "nix-community",
+        "repo": "lanzaboote",
+        "rev": "7c9a54a7f87b4539ddbd8bda09a8a5f5f9361aa9",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "ref": "v1.1.0",
+        "repo": "lanzaboote",
+        "type": "github"
+      }
+    },
+    "millennium": {
+      "inputs": {
+        "millennium-src": "millennium-src",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "nixpkgs-bun": "nixpkgs-bun"
+      },
+      "locked": {
+        "dir": "packages/nix",
+        "lastModified": 1792022604,
+        "narHash": "sha256-xyl3KTB+j4W3dAxQVSolNJCQZOasDnCLB3Dr14adBmU=",
+        "owner": "SteamClientHomebrew",
+        "repo": "Millennium",
+        "rev": "22af2f453777a925fb398a3dab60a407e66aa83f",
+        "type": "github"
+      },
+      "original": {
+        "dir": "packages/nix",
+        "owner": "SteamClientHomebrew",
+        "repo": "Millennium",
+        "type": "github"
+      }
+    },
+    "millennium-src": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1791947497,
+        "narHash": "sha256-sNpoyJ+IjrTiDGfX2QiKVg4jkrJR7n9PdBeOYJSS4n8=",
+        "owner": "SteamClientHomebrew",
+        "repo": "Millennium",
+        "rev": "401d532543a0fbff469653ccba802bdd7e45f861",
+        "type": "github"
+      },
+      "original": {
+        "owner": "SteamClientHomebrew",
+        "repo": "Millennium",
+        "rev": "401d532543a0fbff469653ccba802bdd7e45f861",
         "type": "github"
       }
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1723688146,
-        "narHash": "sha256-sqLwJcHYeWLOeP/XoLwAtYjr01TISlkOfz+NG82pbdg=",
+        "lastModified": 1791883866,
+        "narHash": "sha256-yvkDdToRZ4IgPc9tSBzzCYJvTLf8n5eE3rgUkpCuD5A=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "c3d4ac725177c030b1e289015989da2ad9d56af0",
+        "rev": "a033e66ab94a6bedf2c3d58d93a36319d3cbbbaf",
         "type": "github"
       },
       "original": {
         "owner": "NixOS",
-        "ref": "nixos-24.05",
+        "ref": "nixos-26.05",
         "repo": "nixpkgs",
         "type": "github"
       }
     },
-    "nixpkgs-23-11": {
+    "nixpkgs-bun": {
       "locked": {
-        "lastModified": 1717159533,
-        "narHash": "sha256-oamiKNfr2MS6yH64rUn99mIZjc45nGJlj9eGth/3Xuw=",
-        "owner": "NixOS",
+        "lastModified": 1790822859,
+        "narHash": "sha256-69xHQhAeMAD2wDXO7T2pcOZIF9Sga2W+JkmY2a11Ops=",
+        "owner": "nixos",
         "repo": "nixpkgs",
-        "rev": "a62e6edd6d5e1fa0329b8653c801147986f8d446",
+        "rev": "c59305bab2065cfecc4944690d9eedbb56f3a9fa",
         "type": "github"
       },
       "original": {
-        "owner": "NixOS",
+        "owner": "nixos",
         "repo": "nixpkgs",
-        "rev": "a62e6edd6d5e1fa0329b8653c801147986f8d446",
+        "rev": "c59305bab2065cfecc4944690d9eedbb56f3a9fa",
         "type": "github"
       }
     },
-    "nixpkgs-regression": {
+    "nixpkgs-unstable": {
       "locked": {
-        "lastModified": 1643052045,
-        "narHash": "sha256-uGJ0VXIhWKGXxkeNnq4TvV3CIOkUJ3PAoLZ3HMzNVMw=",
+        "lastModified": 1791956154,
+        "narHash": "sha256-jBYGPi4udQ9uo4KQp9m2J0546nJVQitG15gvZSaVVAs=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "215d4d0fd80ca5163643b03a33fde804a29cc1e2",
-        "type": "github"
-      },
-      "original": {
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "215d4d0fd80ca5163643b03a33fde804a29cc1e2",
-        "type": "github"
-      }
-    },
-    "nixpkgs_2": {
-      "locked": {
-        "lastModified": 1728193676,
-        "narHash": "sha256-PbDWAIjKJdlVg+qQRhzdSor04bAPApDqIv2DofTyynk=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "ecbc1ca8ffd6aea8372ad16be9ebbb39889e55b6",
-        "type": "github"
-      },
-      "original": {
-        "owner": "NixOS",
-        "ref": "nixos-24.05",
-        "repo": "nixpkgs",
-        "type": "github"
-      }
-    },
-    "nixpkgs_3": {
-      "locked": {
-        "lastModified": 1728241625,
-        "narHash": "sha256-yumd4fBc/hi8a9QgA9IT8vlQuLZ2oqhkJXHPKxH/tRw=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "c31898adf5a8ed202ce5bea9f347b1c6871f32d1",
+        "rev": "55bfb4d7437bd4e09ab7cba58a43bd68eb310044",
         "type": "github"
       },
       "original": {
@@ -243,11 +458,198 @@
         "type": "github"
       }
     },
+    "nixpkgs_2": {
+      "locked": {
+        "lastModified": 1789286504,
+        "narHash": "sha256-eiEK7cKZORNEvX0GeF3RtNEF/JXhgf2RqSp3230q13E=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "ef34387ddd751e1ab8857adf4676492d32eb24ec",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixos-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "pre-commit": {
+      "inputs": {
+        "flake-compat": "flake-compat_2",
+        "gitignore": "gitignore",
+        "nixpkgs": [
+          "lanzaboote",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1781733627,
+        "narHash": "sha256-U3yTuGBnmXvXoQI3qkpfEDsn9RovQPAjN7ndRco+3u0=",
+        "owner": "cachix",
+        "repo": "pre-commit-hooks.nix",
+        "rev": "3bbec39bc90eadfa031e6f3b77272f3f60803e39",
+        "type": "github"
+      },
+      "original": {
+        "owner": "cachix",
+        "repo": "pre-commit-hooks.nix",
+        "type": "github"
+      }
+    },
+    "quickjs": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1770976497,
+        "narHash": "sha256-odQznZ/Xc6IGh6JPM1RyyEn9HL/+/AFR99XcF+WHJDc=",
+        "owner": "quickjs-ng",
+        "repo": "quickjs",
+        "rev": "72ba50f63ee31202f8c18b8d07ab1e1c3486ee6f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "quickjs-ng",
+        "repo": "quickjs",
+        "rev": "72ba50f63ee31202f8c18b8d07ab1e1c3486ee6f",
+        "type": "github"
+      }
+    },
     "root": {
       "inputs": {
-        "nix": "nix",
-        "nixos-wsl": "nixos-wsl",
-        "nixpkgs": "nixpkgs_3"
+        "aagl": "aagl",
+        "codex-desktop": "codex-desktop",
+        "home-manager": "home-manager",
+        "lanzaboote": "lanzaboote",
+        "millennium": "millennium",
+        "nixpkgs": "nixpkgs",
+        "nixpkgs-unstable": "nixpkgs-unstable",
+        "simple-wallpaper-engine": "simple-wallpaper-engine",
+        "snowfall-lib": "snowfall-lib",
+        "sops-nix": "sops-nix",
+        "wallpaperengine": "wallpaperengine",
+        "zen-browser": "zen-browser"
+      }
+    },
+    "rust-overlay": {
+      "inputs": {
+        "nixpkgs": [
+          "aagl",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1785907205,
+        "narHash": "sha256-Ds1vTi53af4wDMAveSR/K0JnywDslLwmgwhVIiwnNmY=",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "rev": "c5cb13481d718fac906aa9cfd85f9b60e1a546cb",
+        "type": "github"
+      },
+      "original": {
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "type": "github"
+      }
+    },
+    "rust-overlay_2": {
+      "inputs": {
+        "nixpkgs": [
+          "lanzaboote",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1782012058,
+        "narHash": "sha256-9mWUnReOUXfKjZuJAL/bAFH3LUyECTRtXgSNVjRw3UY=",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "rev": "8534567325bd8a8d2928e6afd81e0a87d19efd3c",
+        "type": "github"
+      },
+      "original": {
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "type": "github"
+      }
+    },
+    "simple-wallpaper-engine": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "utils": "utils"
+      },
+      "locked": {
+        "lastModified": 1772136897,
+        "narHash": "sha256-2RBgZWq80zXVWyOswUlDaoRZtaeT6pBkbNCLdAzLYoY=",
+        "owner": "Maxnights",
+        "repo": "simple-linux-wallpaperengine-gui",
+        "rev": "43ae644754a0a5e96c8ddb9077843643b74f9acc",
+        "type": "github"
+      },
+      "original": {
+        "owner": "Maxnights",
+        "repo": "simple-linux-wallpaperengine-gui",
+        "type": "github"
+      }
+    },
+    "snowfall-lib": {
+      "inputs": {
+        "flake-compat": "flake-compat_3",
+        "flake-utils-plus": "flake-utils-plus",
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1784328457,
+        "narHash": "sha256-4R5WV74NHhPk21ctoPmjL7nQ6txDnoBLwSWULvIw0TY=",
+        "owner": "snowfallorg",
+        "repo": "lib",
+        "rev": "6ee3542cb459ca4b038cfe50ceb8797f05cdabad",
+        "type": "github"
+      },
+      "original": {
+        "owner": "snowfallorg",
+        "repo": "lib",
+        "type": "github"
+      }
+    },
+    "sops-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1788337237,
+        "narHash": "sha256-gkSH8VUtCo6hnysNmb9DbTuDepH2t5pv+QWjP75xKAk=",
+        "owner": "mic92",
+        "repo": "sops-nix",
+        "rev": "fbf759290e0cb0a98dfc813a4eb7d53ad1dacb57",
+        "type": "github"
+      },
+      "original": {
+        "owner": "mic92",
+        "repo": "sops-nix",
+        "type": "github"
+      }
+    },
+    "stb": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1741976854,
+        "narHash": "sha256-FkTeRO/AC5itykH4uWNsE0UeQTS34VtGGoej5QJiBlg=",
+        "owner": "nothings",
+        "repo": "stb",
+        "rev": "f0569113c93ad095470c54bf34a17b36646bbbb5",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nothings",
+        "repo": "stb",
+        "rev": "f0569113c93ad095470c54bf34a17b36646bbbb5",
+        "type": "github"
       }
     },
     "systems": {
@@ -264,6 +666,99 @@
         "repo": "default",
         "type": "github"
       }
+    },
+    "systems_2": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "systems_3": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "utils": {
+      "inputs": {
+        "systems": "systems_2"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "wallpaperengine": {
+      "inputs": {
+        "Catch2": "Catch2",
+        "MimeTypes": "MimeTypes",
+        "SPIRV-Cross-WallpaperEngine": "SPIRV-Cross-WallpaperEngine",
+        "argparse": "argparse",
+        "glslang-WallpaperEngine": "glslang-WallpaperEngine",
+        "json": "json",
+        "kissfft": "kissfft",
+        "nixpkgs": "nixpkgs_2",
+        "quickjs": "quickjs",
+        "stb": "stb"
+      },
+      "locked": {
+        "lastModified": 1790172262,
+        "narHash": "sha256-gTnF4besYxSEFx0GTA35+/k81nE7WwvTIyJbIs1p20k=",
+        "path": "/home/andreas/Projects/linwallpaap/linux-wallpaperengine",
+        "type": "path"
+      },
+      "original": {
+        "path": "/home/andreas/Projects/linwallpaap/linux-wallpaperengine",
+        "type": "path"
+      }
+    },
+    "zen-browser": {
+      "inputs": {
+        "home-manager": "home-manager_2",
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1788405419,
+        "narHash": "sha256-wuGizAVEmY0u15MYrhgy7AoQdHg+4Y2QiC+v/mxA8dc=",
+        "owner": "0xc000022070",
+        "repo": "zen-browser-flake",
+        "rev": "fdb83f8fce835213fab7eab52c375926fe1a32dc",
+        "type": "github"
+      },
+      "original": {
+        "owner": "0xc000022070",
+        "repo": "zen-browser-flake",
+        "type": "github"
+      }
     }
   },
   "root": "root",

flake.nix

@@ -2,110 +2,167 @@
   description = "Nixos config flake test";
 
   inputs = {
-    nixpkgs.url = "github:NixOS/nixpkgs/nixos-unstable";
-    nixos-wsl.url = "github:nix-community/NixOS-WSL/main";
+    # nixpkgs.url = "github:nixos/nixpkgs/nixos-24.05";
+    nixpkgs.url = "github:NixOS/nixpkgs/nixos-26.05";
+    # Application exceptions; keep the system and graphics stack on stable.
+    nixpkgs-unstable.url = "github:NixOS/nixpkgs/nixos-unstable";
+    # nixos-wsl = {
+    #   url = "github:nix-community/NixOS-WSL/main";
+    #   inputs.nixpkgs.follows = "nixpkgs";
+    # };
+    # Snowfallorg's Flake utility
+    snowfall-lib = {
+      url = "github:snowfallorg/lib";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    # game-of-life = {
+    #   url = "github:local-interloper/game-of-life";
+    #   inputs.nixpkgs.follows = "nixpkgs";
+    # };
+    # Add sops-nix for secrets management
+    sops-nix = {
+      url = "github:mic92/sops-nix";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    zen-browser = {
+      url = "github:0xc000022070/zen-browser-flake";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    home-manager = {
+      url = "github:nix-community/home-manager/release-26.05";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    # anikki = {
+    #   url = "github:Hion-V/Anikki-flake";
+    #   inputs.nixpkgs.follows = "nixpkgs";
+    # };
+    lanzaboote = {
+      url = "github:nix-community/lanzaboote/v1.1.0";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    # kwin-effects-forceblur = { Archived.
+    #   url = "github:taj-ny/kwin-effects-forceblur";
+    #   inputs.nixpkgs.follows = "nixpkgs";
+    # };
+    aagl = {
+      url = "github:ezKEa/aagl-gtk-on-nix/release-26.05";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    wallpaperengine.url = "path:/home/andreas/Projects/linwallpaap/linux-wallpaperengine";
+    simple-wallpaper-engine = {
+      url = "github:Maxnights/simple-linux-wallpaperengine-gui";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    millennium = {
+      url = "github:SteamClientHomebrew/Millennium?dir=packages/nix";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    codex-desktop = {
+      url = "github:ilysenko/codex-desktop-linux";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
   };
-  outputs = { self, nixpkgs, nixos-wsl, nix, ... }@inputs:
+
+  outputs = inputs:
     let
-      system =
-        if builtins ? currentSystem
-        then builtins.currentSystem
-        else "x86_64-linux";
-      pkgs = import nixpkgs { inherit system; config.allowUnfree = true; };
-      installedPackages = (import ./installed-packages { inherit pkgs; });
-    in
-    {
-      nixosConfigurations.drivebystation-nixos-wsl = nixpkgs.lib.nixosSystem {
-        inherit system;
-        modules = [
-          nixos-wsl.nixosModules.default
-          ./systems/drivebystation-nixos-wsl/configuration.nix
-          {
-            system.stateVersion = "24.05";
-            wsl.enable = true;
-            nix.settings.experimental-features = [ "nix-command" "flakes" ];
-            environment.systemPackages = [
+      lib = inputs.snowfall-lib.mkLib {
+        inherit inputs;
+        src = ./.;
 
-            ]
-            ++ installedPackages.mkPackages.packages;
-            programs.nix-ld = {
-              enable = true;
-              package = pkgs.nix-ld-rs;
-            };
-          }
-        ];
-        specialArgs = { inherit inputs; };
+        channels-config = {
+          allowUnfree = true;
+          allowUnfreePredicate = _: true;
+          permittedInsecurePackages = [ "openssl-1.1.1w" ];
+        };
+
+        # Configure Snowfall Lib, all of these settings are optional.
+        snowfall = {
+          # Tell Snowfall Lib to look in the `./nix/` directory for your
+          # Nix files.
+          root = ./.;
+
+          # Choose a namespace to use for your flake's packages, library,
+          # and overlays.
+          namespace = "my-namespace";
+
+          # Add flake metadata that can be processed by tools like Snowfall Frost.
+          meta = {
+            # A slug to use in documentation when displaying things like file paths.
+            name = "nixos-config-hionv";
+
+            # A title to show for your flake, typically the name.
+            title = "Hion's Personal NixOS Config";
+          };
+        };
       };
-      nixosConfigurations.th0nkpad-nixos = nixpkgs.lib.nixosSystem {
-        inherit system;
-        modules = [
-          ./systems/th0nkpad-nixos/configuration.nix
-          {
-            system.stateVersion = "24.05";
-            nix.settings.experimental-features = [ "nix-command" "flakes" ];
-            # Define a user account. Don't forget to set a password with ‘passwd’.
-            users.users.andreas = {
-              isNormalUser = true;
-              description = "Andreas";
-              extraGroups = [ "networkmanager" "wheel" ];
-              packages = with pkgs; [
-                flatpak
-                gnome-software
-                soundwireserver
-		            vscode
-                spotify
-                #  thunderbird
-              ];
-            };
+    in
+    lib.mkFlake {
+      inherit inputs;
+      src = ./.;
+      
+      overlays = with inputs; [
+        inputs.millennium.overlays.default
+      ];
+      
+      nixos = with inputs; [
+        
+        # disko.nixosModules.disko
+        # impermanence.nixosModules.impermanence
+        home-manager.nixosModules.home-manager
+        {
+          home-manager = {
+            useGlobalPkgs = false;  # Disabled to allow system-level overlays to work
+            useUserPackages = true;
+          };
+        }
+        # nix-ld.nixosModules.nix-ld
+        # sops-nix.nixosModules.sops
+        # stylix.nixosModules.stylix
+      ];
+
+      systems.modules.nixos = with inputs; [
+        # my-input.nixosModules.my-module
+        lanzaboote.nixosModules.lanzaboote ({ pkgs, lib, ... }: {
+          environment.systemPackages = [
+            # For debugging and troubleshooting Secure Boot.
+            pkgs.sbctl
+          ];
 
 
-            # Open ports in the firewall.
-            networking.firewall.allowedTCPPorts = [
-              59010 #SoundWireServer
-              3389 #RDP
-            ];
-            networking.firewall.allowedUDPPorts = [
-              59010 #SoundWireServer
-              3389  #RDP
-            ];
-            # Or disable the firewall altogether.
-            # networking.firewall.enable = false;
+          boot.loader.systemd-boot.configurationLimit = 4;
+          # Lanzaboote currently replaces the systemd-boot module.
+          # This setting is usually set to true in configuration.nix
+          # generated at installation time. So we force it to false
+          # for now.
+          boot.loader.systemd-boot.enable = lib.mkForce false;
 
-            # Install firefox.
-            programs.firefox.enable = true;
+          boot.lanzaboote = {
+            enable = true;
+            pkiBundle = "/var/lib/sbctl";
+          };
+        })
+      ];
 
-            # Set up system Packages
-            environment.systemPackages = with pkgs; [
-              git
-              #  vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
-              #  wget
-            ]
-            ++ installedPackages.mkPackages.packages;
-            programs.nix-ld = {
-              enable = true;
-              package = pkgs.nix-ld-rs;
-            };
-            services.flatpak.enable = true;
-            systemd.services.flatpak-repo = {
-              wantedBy = [ "multi-user.target" ];
-              path = [ pkgs.flatpak ];
-              script = ''
-                flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
-              '';
-            };
-            # services.xrdp.enable = true;
-            # services.xrdp.defaultWindowManager = "${pkgs.gnome-session}/bin/gnome-session";
-            # # services.xrdp.openFirewall = true;
-
-            # # Disable the GNOME3/GDM auto-suspend feature that cannot be disabled in GUI!
-            # # If no user is logged in, the machine will power down after 20 minutes.
-            # systemd.targets.sleep.enable = false;
-            # systemd.targets.suspend.enable = false;
-            # systemd.targets.hibernate.enable = false;
-            # systemd.targets.hybrid-sleep.enable = false;
-          }
+      # The attribute set specified here will be passed directly to NixPkgs when
+      # instantiating the package set.
+      channels-config = {
+        # Allow unfree packages.
+        allowUnfree = true;
+        permittedInsecurePackages = [
+          "mbedtls-2.28.10" # needed for haxe 4.3.6
         ];
-        specialArgs = { inherit inputs; };
+        # # Allow certain insecure packages
+        # permittedInsecurePackages = [
+        #   "firefox-100.0.0"
+        # ];
+
+        # # Additional configuration for specific packages.
+        # config = {
+        #   # For example, enable smartcard support in Firefox.
+        #   firefox.smartcardSupport = true;
+        # };
+
+
       };
     };
 }

homes/x86_64-linux/andreas@drivebystation-nix/default.nix

@@ -0,0 +1,63 @@
+{ config
+, lib
+, inputs
+, pkgs
+, ...
+}:
+let
+  inherit (lib.my-namespace) enabled;
+  system = pkgs.stdenv.hostPlatform.system;
+  simpleWallpaperEngine =
+    inputs.simple-wallpaper-engine.packages.${system}.default.override {
+      # The upstream GUI package otherwise puts nixpkgs' unmodified
+      # linux-wallpaperengine in its wrapped PATH.
+      pkgs = pkgs // {
+        linux-wallpaperengine = inputs.wallpaperengine.packages.${system}.default;
+      };
+    };
+in
+{
+  imports = [
+    # ../modules.nix
+  ];
+  my-namespace.home = {
+    stream-tools = enabled;
+    gnome-customizations = enabled;
+    vesktop-appimage = enabled;
+    # networking = enabled;
+    # personal-apps = enabled;
+    # suites.laptop = enabled;
+  };
+  home = {
+    packages = [
+      pkgs.nil
+      pkgs.beeper
+      pkgs.mpv
+      pkgs.my-namespace.udev-steelseries
+      pkgs.qbittorrent
+      pkgs.hyfetch
+      pkgs.libreoffice
+      pkgs.localsend
+      simpleWallpaperEngine
+      # pkgs.vesktop
+      pkgs.obsidian
+      inputs.zen-browser.packages.x86_64-linux.default    
+      # inputs.kwin-effects-forceblur.packages.${pkgs.stdenv.hostPlatform.system}.default # Archived.
+    ];
+  };
+  xdg.autostart = {
+    enable = true;
+    entries = [
+      "${simpleWallpaperEngine}/share/applications/simple-wallpaper-engine-autostart.desktop"
+    ];
+  };
+  # Auto-start linux-wallpaperengine for dual monitors via XDG autostart
+  # xdg.configFile."autostart/linux-wallpaperengine.desktop".text = ''
+  #   [Desktop Entry]
+  #   Type=Application
+  #   Name=Wallpaper Engine
+  #   Exec=${pkgs.my-namespace.linux-wallpaperengine}/bin/linux-wallpaperengine --screen-root DP-1 --bg 2935872330 --screen-root DP-2 --bg 2935872330 -f 12
+  #   X-KDE-autostart-after=panel
+  #   X-KDE-StartupNotify=false
+  # '';
+}

homes/x86_64-linux/gaming@drivebystation-nix/default.nix

@@ -0,0 +1,29 @@
+{ config
+, lib
+, pkgs
+, ...
+}:
+let
+  inherit (lib.my-namespace) enabled;
+in
+{
+  imports = [
+    # ../modules.nix
+  ];
+  my-namespace.home = {
+    stream-tools = enabled;
+    gnome-customizations = enabled;
+    # networking = enabled;
+    # personal-apps = enabled;
+    # suites.laptop = enabled;
+  };
+  home = {
+    packages = [
+      pkgs.nil
+      pkgs.beeper
+      pkgs.my-namespace.udev-steelseries
+      pkgs.qbittorrent
+      #pkgs.vesktop
+    ];
+  };
+}

installed-packages/default.nix

@@ -1,21 +0,0 @@
-{ pkgs }:
-let 
-    baseBackages = [
-      pkgs.vim
-      pkgs.nixpkgs-fmt
-    ];
-    utilPackages = [
-      pkgs.wget
-      pkgs.curl
-      pkgs.git
-      pkgs.ffmpeg
-    ];
-    haxeDevelopmentPackages = [
-      pkgs.haxe
-    ];
-in
-{
-  mkPackages = {
-    packages = baseBackages ++ utilPackages ++ haxeDevelopmentPackages;
-  };
-}

installed-packages/desktop/default.nix

@@ -1,21 +0,0 @@
-{ pkgs }:
-let 
-    baseBackages = [
-      pkgs.vim
-      pkgs.nixpkgs-fmt
-    ];
-    utilPackages = [
-      pkgs.wget
-      pkgs.curl
-      pkgs.git
-      pkgs.ffmpeg
-    ];
-    haxeDevelopmentPackages = [
-      pkgs.haxe
-    ];
-in
-{
-  mkPackages = {
-    packages = baseBackages ++ utilPackages ++ haxeDevelopmentPackages;
-  };
-}

lib/default.nix

@@ -0,0 +1,32 @@
+{lib, ...}: let
+  inherit (lib) mkOption strings;
+  inherit (lib.attrsets) filterAttrs mapAttrsToList;
+  inherit (lib.types) bool;
+in rec {
+  disabled = {enable = false;};
+  enabled = {enable = true;};
+  ifThenElse = cond: t: f:
+    if cond
+    then t
+    else f;
+  mkOpt = type: default: description:
+    mkOption {inherit type default description;};
+  mkOpt' = type: default: mkOpt type default null;
+  mkBoolOpt = mkOpt bool;
+  mkBoolOpt' = mkOpt' bool;
+  mkPxeMenu = args:
+    ''
+      UI menu.c32
+      TIMEOUT 300
+    ''
+    + strings.concatStringsSep "\n" (mapAttrsToList
+      (
+        name: value: ''
+          LABEL ${name}
+            MENU LABEL ${value.content.label}
+            KERNEL ${value.content.kernel}
+            append ${value.content.append}
+        ''
+      )
+      (filterAttrs (_: v: v.condition) args));
+}

lib/installed-packages/default.nix

@@ -0,0 +1,45 @@
+{
+  # This is the merged library containing your namespaced library as well as all libraries from
+  # your flake's inputs.
+  lib
+, # Your flake inputs are also available.
+  inputs
+, # The namespace used for your flake, defaulting to "internal" if not set.
+  namespace
+, # Additionally, Snowfall Lib's own inputs are passed. You probably don't need to use this!
+  snowfall-inputs
+, ...
+}:
+
+{
+  # This will be available as `lib.my-namespace.mkPackages`.
+  mkPackages = {pkgs, ...}:
+    let
+      inherit pkgs;
+      # pkgs = namespace.;
+      # pkgs = snowfall-inputs.nixpkgs { system = "x86_64-linux"; config.allowUnfree = true; };
+      baseBackages = [
+        pkgs.vim
+        pkgs.nixpkgs-fmt
+      ];
+      utilPackages = [
+        pkgs.wget
+        pkgs.curl
+        pkgs.git
+        pkgs.ffmpeg
+      ];
+      haxeDevelopmentPackages = [
+        pkgs.haxe
+      ];
+    in
+    {
+      packages = baseBackages ++ utilPackages ++ haxeDevelopmentPackages;
+    };
+
+  # my-scope = {
+  #     # This will be available as `lib.my-namespace.my-scope.my-scoped-helper-function`.
+  #     my-scoped-helper-function = x: x;
+  # };
+}
+
+

modules/home/gnome-customizations/default.nix

@@ -0,0 +1,18 @@
+{ config
+, lib
+, ...
+}:
+let
+  inherit (lib) mkEnableOption mkIf;
+  cfg = config.my-namespace.home.gnome-customizations;
+in
+{
+  options.my-namespace.home.gnome-customizations = {
+    enable = mkEnableOption "Enable GNOME customizations";
+  };
+  config = mkIf cfg.enable {
+    # GNOME settings
+    dconf.settings."org/gnome/desktop/wm/preferences".button-layout = "appmenu:,minimize,maximize,close";
+    dconf.settings."org/gnome/mutter".experimental-features = [ "scale-monitor-framebuffer" ];
+  };
+}

modules/home/home/default.nix

@@ -0,0 +1,78 @@
+{
+  # Snowfall Lib provides a customized `lib` instance with access to your flake's library
+  # as well as the libraries available from your flake's inputs.
+  lib
+, # An instance of `pkgs` with your overlays and packages applied is also available.
+  pkgs
+, # You also have access to your flake's inputs.
+  inputs
+, # Additional metadata is provided by Snowfall Lib.
+  namespace
+, # The namespace used for your flake, defaulting to "internal" if not set.
+  system
+, # The system architecture for this host (eg. `x86_64-linux`).
+  target
+, # The Snowfall Lib target for this system (eg. `x86_64-iso`).
+  format
+, # A normalized name for the system target (eg. `iso`).
+  virtual
+, # A boolean to determine whether this system is a virtual target using nixos-generators.
+  systems
+, # An attribute map of your defined hosts.
+  # All other arguments come from the module system.
+  config
+, ...
+}:
+let
+  inherit (lib) mkIf;
+  inherit (lib.my-namespace) enabled;
+
+  imp = config.my-namespace.home.impermanence.enable;
+in
+{
+  config = {
+    home = {
+      packages = with pkgs; [
+        inetutils
+        hyfetch
+        tmux
+        # nerdfonts
+        p7zip
+        rclone
+        ripgrep
+        unzip
+        zip
+      ];
+      sessionPath = [ "$HOME/bin" "$HOME/.local/bin" ];
+      shellAliases = {
+        # "df" = "duf -only local";
+        # "du" = "dust -xd1 --skip-total";
+        # # "ducks" = "du -chs * 2>/dev/null | sort -rh | head -11 && du -chs .* 2>/dev/null | sort -rh | head -11";
+        # "gmount" = "rclone mount google:/ ~/Drive/";
+        "df" = "df -h";
+        "nano" = "vim";
+      };
+      stateVersion = "24.05";
+    };
+    # manual = {
+    #   html.enable = false;
+    #   manpages.enable = false;
+    #   json.enable = false;
+    # };
+    programs = {
+      bash = {
+        enable = true;
+        enableCompletion = true;
+        enableVteIntegration = true;
+      };
+      dircolors = enabled;
+      direnv = {
+        enable = true;
+        enableBashIntegration = true;
+        nix-direnv = enabled;
+      };
+      home-manager = enabled;
+    };
+    services = { };
+  };
+}

modules/home/stream-tools/default.nix

@@ -0,0 +1,36 @@
+{
+  pkgs,
+  config,
+  lib,
+  ...
+}: let
+  inherit (lib) mkEnableOption mkIf;
+  cfg = config.my-namespace.home.stream-tools;
+in {
+  options.my-namespace.home.stream-tools = {
+    enable = mkEnableOption "Enable the Stream Machine Tools";
+  };
+
+  
+
+  config = mkIf cfg.enable {
+    programs.obs-studio = {
+      enable = true;
+      plugins = with pkgs.obs-studio-plugins; [
+        wlrobs
+        obs-backgroundremoval
+        obs-pipewire-audio-capture
+        obs-vaapi #optional AMD hardware acceleration
+        obs-gstreamer
+        obs-vkcapture
+        pkgs.my-namespace.droidcam-obs  # Custom override with FFmpeg 6
+      ];
+    };
+    home = {
+      packages = with pkgs; [
+        config.programs.obs-studio.finalPackage
+        droidcam
+      ];
+    };
+  };
+}

modules/home/vesktop-appimage/default.nix

@@ -0,0 +1,49 @@
+{ config, pkgs, lib, ... }:
+let
+  inherit (lib) mkEnableOption mkIf;
+  cfg = config.my-namespace.home.vesktop-appimage;
+  vesktopVersion = "1.6.4";
+
+  vesktopAppImage = pkgs.runCommand "vesktop-appimage" { } ''
+    cp ${pkgs.fetchurl {
+      url = "https://github.com/Vencord/Vesktop/releases/download/v${vesktopVersion}/Vesktop-${vesktopVersion}.AppImage";
+      sha256 = "sha256-o7A8DBQyutONeLp5rstq9hQko2xxbvYZvGGM8/YOQ8s=";      
+    }} $out
+    chmod +x $out
+  '';
+
+  vesktopWrapped = pkgs.writeShellScriptBin "vesktop" ''
+    exec ${pkgs.appimage-run}/bin/appimage-run ${vesktopAppImage} "$@"
+  '';
+
+  vesktopIcon = pkgs.fetchurl {
+    url = "https://raw.githubusercontent.com/Vencord/Vesktop/main/build/icon.svg";
+    sha256 = "sha256-fQ+dvbPIb4AFd9f7JqIt7+twJdEMQF9jTTwrk5p1vn8=";
+  };
+
+in
+{
+  options.my-namespace.home.vesktop-appimage = {
+    enable = mkEnableOption "Install Vesktop (AppImage) with Vencord support";
+  };
+
+  config = mkIf cfg.enable {
+
+    xdg.dataFile."icons/hicolor/scalable/apps/vesktop.svg".source = vesktopIcon;
+
+    home.packages = [
+      pkgs.appimage-run
+      vesktopWrapped
+    ];
+
+    xdg.desktopEntries.vesktop = {
+      name = "Vesktop";
+      comment = "Discord client with Vencord (AppImage)";
+      exec = "${vesktopWrapped}/bin/vesktop";
+      icon = "vesktop";
+      terminal = false;
+      type = "Application";
+      categories = [ "Network" "Chat" ];
+    };
+  };
+}

modules/nixos/cs-tools/default.nix

@@ -0,0 +1,24 @@
+{ lib, pkgs, config, namespace, ... }:
+
+let
+  cfg = config.${namespace}.cs-tools;
+in
+{
+  options.${namespace}.cs-tools = {
+    enable = lib.mkEnableOption "CS tools including CS Demo Manager and PostgreSQL";
+  };
+
+  config = lib.mkIf cfg.enable {
+    services.postgresql = {
+      enable = true;
+      ensureDatabases = [ "csdm" ];
+      ensureUsers = [{
+        name = "csdm";
+      }];
+    };
+    environment.systemPackages = with pkgs; [
+      my-namespace.cs-demo-manager
+      postgresql
+    ];
+  };
+}

modules/nixos/desktop-environment/default.nix

@@ -0,0 +1,160 @@
+{ config, lib, pkgs, namespace, ... }:
+
+let
+  cfg = config.${namespace}.desktop-environment;
+in {
+
+  options.${namespace}.desktop-environment = {
+    cinnamon = {
+      enable = lib.mkEnableOption "Cinnamon desktop environment";
+    };
+    xfce = {
+      enable = lib.mkEnableOption "XFCE desktop environment";
+    };
+    gnome = {
+      enable = lib.mkEnableOption "GNOME desktop environment";
+    };
+    kde = {
+      enable = lib.mkEnableOption "KDE Plasma desktop environment";
+    };
+    cosmic = {
+      enable = lib.mkEnableOption "Cosmic desktop environment";
+    };
+    hyprland = {
+      enable = lib.mkEnableOption "hyprland Wayland shell";
+    };
+  };
+
+  config = lib.mkMerge [
+    (lib.mkIf cfg.xfce.enable {
+      services.xserver = {
+        enable = true;
+        desktopManager = {
+          cinnamon.enable = true;
+        };
+      };
+      environment.sessionVariables.NIX_GSETTINGS_OVERRIDES_DIR = 
+        lib.mkForce "${pkgs.gnome.nixos-gsettings-overrides}/share/gsettings-schemas/nixos-gsettings-overrides/glib-2.0/schemas";
+    })
+    (lib.mkIf cfg.xfce.enable {
+      services.xserver = {
+        enable = true;
+        desktopManager = {
+          xfce.enable = true;
+        };
+      };
+      environment.systemPackages = with pkgs; [
+        xfce4-pulseaudio-plugin
+        xfce4-clipman-plugin
+        xfce4-screenshooter
+        xfce4-whiskermenu-plugin
+        thunar-archive-plugin
+        thunar-volman
+        gvfs
+        gnome-keyring
+        libgnome-keyring
+      ];
+    })
+
+    (lib.mkIf cfg.gnome.enable {
+      services.xserver = {
+        enable = true;
+      };
+      services.desktopManager.gnome.enable = true;
+      services.gnome.gnome-remote-desktop.enable = true;
+      systemd.services.gnome-remote-desktop = { 
+        wantedBy = [ "graphical.target" ]; # for starting the unit automatically at boot
+      };
+      services.displayManager.autoLogin.enable = false;
+      networking.firewall.allowedTCPPorts = [ 
+        3389 
+        3390
+      ];
+
+      # users.users.andreas.extraGroups = [ "sambashare" ];    
+      # Enable Avahi (mDNS/DNS-SD) for discovery
+      services.avahi = {
+        enable = true;
+        nssmdns4 = true;
+        openFirewall = true;
+      };
+      # Enable GNOME sharing services
+      services.gnome.gnome-user-share.enable = true;
+
+      environment.systemPackages = with pkgs; [
+        gnome-tweaks
+        ptyxis
+        gnome-software
+        gnomeExtensions.pop-shell
+        gnome-remote-desktop
+        dconf-editor
+        glib-networking # Required gnome-remote-desktop dependency
+      ];
+      systemd.user.services.gnome-remote-desktop.environment = {
+        VK_ICD_FILENAMES = "/dev/null";
+        LIBGL_ALWAYS_SOFTWARE = "1";
+      };
+
+      systemd.services.gnome-remote-desktop.environment = {
+        VK_ICD_FILENAMES = "/dev/null";
+        LIBGL_ALWAYS_SOFTWARE = "1";
+      };
+      environment.sessionVariables.XDG_DATA_DIRS = lib.mkAfter [
+        "${pkgs.gnome-remote-desktop}/share"
+      ];
+      environment.pathsToLink = [
+        "/share/gsettings-schemas"
+        "/share"
+      ];
+    })
+
+    (lib.mkIf cfg.kde.enable {
+      services.xserver.enable = true;
+      services.desktopManager.plasma6.enable = true;
+      environment.sessionVariables = {
+        # Forces KWin to use the legacy DRM interface so "Allow Tearing" actually works
+        # KWIN_DRM_NO_AMS = "1";
+        # Disables the new triple buffering in Plasma 6.1+ to reduce latency
+        # KWIN_DRM_DISABLE_TRIPLE_BUFFERING = "1";
+        # KWIN_USE_HWCURSOR = "0";
+        # KWIN_DRM_USE_EGL_STREAMS = "0";
+        # MESA_VK_WSI_PRESENT_MODE = "immediate";
+        # vblank_mode = "0";
+      };
+      environment.systemPackages = with pkgs; [
+        kdePackages.qtwebsockets
+        kdePackages.qtwebchannel
+        kdePackages.korganizer
+        kdePackages.akonadi
+        kdePackages.akonadi-calendar
+        kdePackages.akonadi-contacts
+        kdePackages.kaddressbook
+        kdePackages.kmail
+        kdePackages.kdepim-runtime
+        kdePackages.kontact
+        kdePackages.kidentitymanagement
+        kdePackages.libkdepim
+        kdePackages.kwin
+        kdePackages.plasma-workspace
+        gnome-keyring
+        libgnome-keyring
+      ];
+    })
+    (lib.mkIf cfg.cosmic.enable {
+      services.desktopManager.cosmic.enable = true;
+      services.desktopManager.cosmic.xwayland.enable = true;
+      environment.systemPackages = with pkgs; [
+        
+        gnome-keyring
+        libgnome-keyring
+      ];
+    })
+    (lib.mkIf cfg.hyprland.enable {
+      programs.hyprland.enable = true; # enable Hyprland
+      environment.systemPackages = with pkgs; [
+        pkgs.kitty # required for the default Hyprland config
+      ];
+    })
+  ];
+
+}

modules/nixos/distrobox/default.nix

@@ -0,0 +1,21 @@
+{
+  config,
+  lib,
+  pkgs,
+  namespace,
+  ...
+}:
+let
+  cfg = config.${namespace}.distrobox;
+in
+{
+  options.${namespace}.distrobox = {
+    enable = lib.mkEnableOption "Distrobox with a Podman container backend";
+  };
+
+  config = lib.mkIf cfg.enable {
+    environment.systemPackages = [ pkgs.distrobox ];
+
+    virtualisation.podman.enable = true;
+  };
+}

modules/nixos/file-organization/default.nix

@@ -0,0 +1,23 @@
+{
+  config,
+  lib,
+  pkgs,
+  namespace,
+  ...
+}:
+let
+  cfg = config.${namespace}.file-organization;
+in
+{
+  options.${namespace}.file-organization = {
+    enable = lib.mkEnableOption "file organization software";
+  };
+  config = lib.mkIf cfg.enable {
+    environment.systemPackages = with pkgs; [
+      ranger
+      fsearch
+      qdirstat
+      veracrypt
+    ];
+  };
+}

modules/nixos/gnome-keyring/default.nix

@@ -0,0 +1,30 @@
+{ config, lib, pkgs, namespace, options, ... }:
+
+let
+  cfg = config.${namespace}.gnome-keyring;
+in {
+  options.${namespace}.gnome-keyring = {
+    enable = lib.mkEnableOption "Enable GNOME Keyring integration";    
+  };
+  
+  config = lib.mkIf cfg.enable {
+    services.gnome.gnome-keyring.enable = true;
+    
+    # PAM configuration for automatic keyring unlock
+    security.pam.services.sddm.enableGnomeKeyring = true;
+    security.pam.services.login.enableGnomeKeyring = true;
+    security.pam.services.gdm.enableGnomeKeyring = true;
+
+    # Make KDE apps use GNOME Keyring as the Secret Service backend
+    environment.variables = {
+      # Set GNOME Keyring as the SSH agent
+      SSH_AUTH_SOCK = "$XDG_RUNTIME_DIR/keyring/ssh";
+    };
+
+    environment.systemPackages = with pkgs; [
+      seahorse # GUI for managing the keyring
+      gcr # Keyring integration
+      libsecret # Secret Service API library for KDE apps
+    ];
+  };
+}

modules/nixos/keychron-keyboard/default.nix

@@ -0,0 +1,120 @@
+{ config, lib, pkgs, namespace, ... }:
+
+let
+  cfg = config.${namespace}.keychron-keyboard;
+in {
+  options.${namespace}.keychron-keyboard = {
+    enable = lib.mkEnableOption "Enable Keychron keyboard configuration";
+    # Add additional options here, e.g. vendor/product IDs, keymaps, etc.
+  };
+
+  config = lib.mkIf cfg.enable {
+
+    # Create the plugdev group and ensure users can access HID devices
+    users.groups.plugdev = {};
+
+    hardware.keyboard.qmk.keychronSupport = true;
+    services.udev.packages = with pkgs; [ qmk qmk-udev-rules ];
+
+
+    # Example udev rule or keychron-specific settings
+    services.udev.extraRules = ''
+      # Atmel DFU
+      ### ATmega16U2
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2fef", TAG+="uaccess"
+      ### ATmega32U2
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", TAG+="uaccess"
+      ### ATmega16U4
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff3", TAG+="uaccess"
+      ### ATmega32U4
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", TAG+="uaccess"
+      ### AT90USB64
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff9", TAG+="uaccess"
+      ### AT90USB162
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffa", TAG+="uaccess"
+      ### AT90USB128
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", TAG+="uaccess"
+
+      # Input Club
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", ATTRS{idProduct}=="b007", TAG+="uaccess"
+
+      # STM32duino
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", TAG+="uaccess"
+      # STM32 DFU
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", TAG+="uaccess"
+
+      # BootloadHID
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05df", TAG+="uaccess"
+
+      # USBAspLoader
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05dc", TAG+="uaccess"
+
+      # USBtinyISP
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="1782", ATTRS{idProduct}=="0c9f", TAG+="uaccess"
+
+      # ModemManager should ignore the following devices
+      # Atmel SAM-BA (Massdrop)
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+
+      # Caterina (Pro Micro)
+      ## pid.codes shared PID
+      ### Keyboardio Atreus 2 Bootloader
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="1209", ATTRS{idProduct}=="2302", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ## Spark Fun Electronics
+      ### Pro Micro 3V3/8MHz
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9203", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ### Pro Micro 5V/16MHz
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9205", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ### LilyPad 3V3/8MHz (and some Pro Micro clones)
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9207", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ## Pololu Electronics
+      ### A-Star 32U4
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="1ffb", ATTRS{idProduct}=="0101", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ## Arduino SA
+      ### Leonardo
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ### Micro
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0037", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ## Adafruit Industries LLC
+      ### Feather 32U4
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="239a", ATTRS{idProduct}=="000c", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ### ItsyBitsy 32U4 3V3/8MHz
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="239a", ATTRS{idProduct}=="000d", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ### ItsyBitsy 32U4 5V/16MHz
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="239a", ATTRS{idProduct}=="000e", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ## dog hunter AG
+      ### Leonardo
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0036", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ### Micro
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0037", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+
+      # hid_listen
+      KERNEL=="hidraw*", MODE="0666", TAG+="uaccess", TAG+="udev-acl"
+
+      # hidraw devices for WebHID (Keychron Launcher, VIA)
+      SUBSYSTEM=="hidraw", MODE="0666", TAG+="uaccess", TAG+="udev-acl"
+
+      # hid bootloaders
+      ## QMK HID
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2067", TAG+="uaccess"
+      ## PJRC's HalfKay
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="0478", TAG+="uaccess"
+
+      # APM32 DFU
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="314b", ATTRS{idProduct}=="0106", TAG+="uaccess"
+
+      # GD32V DFU
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="28e9", ATTRS{idProduct}=="0189", TAG+="uaccess"
+
+      # WB32 DFU
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="342d", ATTRS{idProduct}=="dfa0", TAG+="uaccess"
+
+      # AT32 DFU
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e3c", ATTRS{idProduct}=="df11", TAG+="uaccess"
+    '';
+    #
+    # home.file.".config/some-config".text = ''
+    #   # keyboard-related configuration
+    # '';
+  };
+}

modules/nixos/nixos/default.nix

@@ -0,0 +1,53 @@
+############################################
+#
+#   Shared System Configuration module that's always enabled by default courtesy of snowfall lib
+#
+############################################
+{
+  # Snowfall Lib provides a customized `lib` instance with access to your flake's library
+  # as well as the libraries available from your flake's inputs.
+  lib
+, # An instance of `pkgs` with your overlays and packages applied is also available.
+  pkgs
+, # You also have access to your flake's inputs.
+  inputs
+, # Additional metadata is provided by Snowfall Lib.
+  namespace
+, # The namespace used for your flake, defaulting to "internal" if not set.
+  system
+, # The system architecture for this host (eg. `x86_64-linux`).
+  target
+, # The Snowfall Lib target for this system (eg. `x86_64-iso`).
+  format
+, # A normalized name for the system target (eg. `iso`).
+  virtual
+, # A boolean to determine whether this system is a virtual target using nixos-generators.
+  systems
+, # An attribute map of your defined hosts.
+
+  # All other arguments come from the module system.
+  config
+, ...
+}:
+let
+  inherit (lib) mkIf;
+  inherit (lib.my-namespace) enabled;
+in
+{
+  config = {
+    boot = { };
+    console = { };
+    environment = {
+      systemPackages =
+        (with pkgs; [
+          age
+          wget
+          sops
+          bitwarden-desktop #replaced bitwarden
+          bitwarden-cli
+          cowsay
+          remmina
+        ]);
+    };
+  };
+}

modules/nixos/performance-tuning/default.nix

@@ -0,0 +1,23 @@
+{ config, lib, pkgs, namespace, ... }:
+
+let
+  cfg = config.${namespace}.performance-tuning;
+in {
+  options.${namespace}.performance-tuning.enable = lib.mkEnableOption "performance tuning settings for gaming and general use";
+  config = lib.mkIf cfg.enable {
+    boot.kernelParams = [
+      "nvme_core.default_ps_max_latency_us=0"
+    ];
+
+    boot.kernel.sysctl = {
+      "vm.swappiness" = 10;
+      "vm.dirty_ratio" = 10;
+      "vm.dirty_background_ratio" = 5;
+    };
+
+    services.pipewire.extraConfig.pipewire."context.properties" = {
+      "default.clock.quantum" = 256;
+      "default.clock.min-quantum" = 128;
+    };
+  };
+}

modules/nixos/rtl8125-recovery/default.nix

@@ -0,0 +1,58 @@
+{ config, lib, pkgs, namespace, ... }:
+let
+  cfg = config.${namespace}.rtl8125-recovery;
+  recovery = pkgs.writeShellApplication {
+    name = "rtl8125-recover";
+    runtimeInputs = with pkgs; [ coreutils gnugrep pciutils ethtool systemd ];
+    text = builtins.readFile ./recover.sh;
+  };
+in {
+  options.${namespace}.rtl8125-recovery = {
+    enable = lib.mkEnableOption "RTL8125 PCI recovery after boot and resume";
+    pciAddress = lib.mkOption {
+      type = lib.types.str;
+      default = "0000:0a:00.0";
+      description = "PCI address of the onboard RTL8125 controller.";
+    };
+    bridgeAddress = lib.mkOption {
+      type = lib.types.str;
+      default = "0000:06:03.0";
+      description = "Immediate parent PCI bridge of the controller.";
+    };
+  };
+
+  config = lib.mkIf cfg.enable {
+    systemd.services.rtl8125-recovery = {
+      description = "Recover RTL8125 from failed PCI power restoration";
+      wantedBy = [ "multi-user.target" ];
+      after = [ "NetworkManager.service" ];
+      environment = {
+        NIC_PCI = cfg.pciAddress;
+        NIC_BRIDGE = cfg.bridgeAddress;
+      };
+      serviceConfig = {
+        Type = "oneshot";
+        ExecStart = lib.getExe recovery;
+        TimeoutStartSec = "90s";
+        StateDirectory = "rtl8125-recovery";
+        StateDirectoryMode = "0700";
+        UMask = "0077";
+      };
+    };
+
+    # sleep.target is stopped after resume. Queue recovery separately so its
+    # grace period does not hold up the sleep transaction or user sessions.
+    systemd.services.rtl8125-resume = {
+      description = "Queue RTL8125 recovery after waking";
+      wantedBy = [ "sleep.target" ];
+      before = [ "sleep.target" ];
+      unitConfig.StopWhenUnneeded = true;
+      serviceConfig = {
+        Type = "oneshot";
+        RemainAfterExit = true;
+        ExecStart = "${pkgs.coreutils}/bin/true";
+        ExecStop = "${pkgs.systemd}/bin/systemctl --no-block start rtl8125-recovery.service";
+      };
+    };
+  };
+}

modules/nixos/rtl8125-recovery/recover.sh

@@ -0,0 +1,89 @@
+# Called once after boot or resume. No network access is required.
+set -euo pipefail
+nic="/sys/bus/pci/devices/$NIC_PCI"
+bridge="/sys/bus/pci/devices/$NIC_BRIDGE"
+log() { echo "rtl8125-recovery: $*"; }
+
+# Let normal PCI and network resume finish before diagnosing anything.
+sleep 10
+if [[ ! -d "$bridge" ]]; then
+    log "Parent bridge $NIC_BRIDGE is absent; refusing recovery."
+    exit 1
+fi
+if [[ $(cat "$bridge/vendor") != 0x1022 || $(cat "$bridge/device") != 0x43f5 ]]; then
+    log "Parent bridge identity changed; refusing recovery."
+    exit 1
+fi
+
+if [[ -d "$nic" ]]; then
+    if [[ $(cat "$nic/vendor") != 0x10ec || $(cat "$nic/device") != 0x8125 ]]; then
+        log "Device at $NIC_PCI is not an RTL8125; refusing recovery."
+        exit 1
+    fi
+    if [[ $(dirname "$(readlink -f "$nic")") != "$(readlink -f "$bridge")" ]]; then
+        log "NIC is no longer directly below the configured bridge; refusing recovery."
+        exit 1
+    fi
+    power=$(cat "$nic/power_state")
+    command=$(timeout 5 setpci -s "$NIC_PCI" COMMAND 2>/dev/null || true)
+    # Both memory decoding and bus mastering should be enabled on this host.
+    # Disconnected cables do not disable these PCI command bits.
+    if [[ "$power" != D3cold && "$command" =~ ^[[:xdigit:]]{4}$ ]] &&
+        (( (16#$command & 6) == 6 )); then
+        log "PCI state healthy ($power, COMMAND=$command); no recovery needed."
+        exit 0
+    fi
+    # An administratively disabled NIC should not be automatically reset.
+    netdirs=("$nic"/net/*)
+    if [[ -e "${netdirs[0]}/flags" ]]; then
+        flags=$(cat "${netdirs[0]}/flags")
+        if (( (flags & 1) == 0 )); then
+            log "Interface is administratively down; leaving it alone."
+            exit 0
+        fi
+    fi
+    log "Failed PCI state: power=$power COMMAND=$command."
+else
+    log "NIC missing; attempting one rescan of its known bridge."
+fi
+
+# Retain evidence from the latest failure without accumulating unlimited logs.
+evidence="${STATE_DIRECTORY:-/var/lib/rtl8125-recovery}/last-failure.log"
+mkdir -p "$(dirname "$evidence")"
+{
+    date -Is
+    timeout 5 lspci -s "$NIC_PCI" -vv || true
+    timeout 5 lspci -s "$NIC_BRIDGE" -vv || true
+    journalctl -b -k --since '10 minutes ago' -n 250 --no-pager || true
+} > "$evidence" 2>&1
+
+# This is the remove/rescan recovery that worked on this machine. Never reset
+# or remove the parent bridge, which could affect other hardware.
+if [[ -d "$nic" ]]; then
+    echo 1 > "$nic/remove"
+fi
+echo 1 > "$bridge/rescan"
+
+for ((attempt=0; attempt<20; attempt++)); do
+    netdirs=("$nic"/net/*)
+    if [[ -e "${netdirs[0]}/ifindex" ]]; then
+        iface=$(basename "${netdirs[0]}")
+        power=$(cat "$nic/power_state")
+        command=$(timeout 5 setpci -s "$NIC_PCI" COMMAND 2>/dev/null || true)
+        if [[ "$power" == D0 && "$command" =~ ^[[:xdigit:]]{4}$ ]] &&
+            (( (16#$command & 6) == 6 )); then
+            # NetworkManager also reapplies the saved profile. Explicitly
+            # restore WoL here so recovery does not depend on its timing.
+            ethtool -s "$iface" wol g
+            if ! ethtool "$iface" | grep -Eq '^[[:space:]]*Wake-on: g$'; then
+                log "PCI recovered, but magic-packet WoL could not be confirmed."
+                exit 1
+            fi
+            log "Recovered $iface in D0; magic-packet WoL enabled. Evidence: $evidence"
+            exit 0
+        fi
+    fi
+    sleep 1
+done
+log "Recovery did not restore operational PCI state; no further attempt this invocation."
+exit 1

modules/nixos/steam/default.nix

@@ -0,0 +1,92 @@
+{
+  # Snowfall Lib provides a customized `lib` instance with access to your flake's library
+  # as well as the libraries available from your flake's inputs.
+  lib, 
+  # An instance of `pkgs` with your overlays and packages applied is also available.
+  pkgs, 
+  # You also have access to your flake's inputs.
+  inputs, 
+  # Additional metadata is provided by Snowfall Lib.
+  # The namespace used for your flake, defaulting to "internal" if not set.
+  namespace, 
+  # The system architecture for this host (eg. `x86_64-linux`).
+  system, 
+  # The Snowfall Lib target for this system (eg. `x86_64-iso`).
+  target, 
+  # A normalized name for the system target (eg. `iso`).
+  format, 
+  # A boolean to determine whether this system is a virtual target using nixos-generators.
+  virtual, 
+  # An attribute map of your defined hosts.
+  systems, 
+  # All other arguments come from the system system.
+  config
+, ...
+}:{
+  config = {
+    # programs.gamescope = {
+    #   enable = true;
+    #   capSysNice = true;
+    # };
+    environment.systemPackages = with pkgs; [
+      protonup-ng  # Tool to install and manage Proton-GE
+      lutris
+      faugus-launcher
+      vkd3d
+      dxvk
+      protontricks
+      mangohud
+      vkbasalt
+      gamescope
+      corefonts
+    ];
+
+    hardware.uinput.enable = true;
+    users.users.andreas.extraGroups = [ "input" ];
+    # Explicitly register the desktop MIME scheme handler
+    xdg.mime = {
+      enable = true;
+      defaultApplications = {
+        "x-scheme-handler/steam" = [ "steam.desktop" ];
+        "x-scheme-handler/steamlink" = [ "steam.desktop" ];
+      };
+    };
+    programs.gamescope.enable = true;
+    programs.steam.gamescopeSession = {
+      enable = true;
+      args = [
+        "-w" "1920"
+        "-h" "1080"
+        "-r" "172"
+        "-e" # Enable steam integration
+        "--steam"
+        "--prefer-outpout DP-4"
+        "--prefer-vk-device 8086:e20b" # lspci -nn | grep VGA
+      ];
+      env = {
+        # WLR_RENDERER = "vulkan";
+        # DXVK_HDR = "0 ";
+        # ENABLE_GAMESCOPE_WSI = "0";
+        # WINE_FULLSCREEN_FSR = "1";
+        # SDL_VIDEODRIVER = "wayland,x11"; # Games allegedly prefer X11
+      };
+    };
+    
+    programs.steam = {
+      enable = true;
+      package = pkgs.millennium-steam.override {
+        extraPkgs = pkgs: with pkgs; [
+          gamemode
+          noto-fonts-color-emoji
+        ];
+        extraEnv = {
+          # SDL_VIDEODRIVER = "wayland,x11";
+          # SDL_VIDEODRIVER = "x11,wayland";
+        };
+      };
+      remotePlay.openFirewall = true; # Open ports in the firewall for Steam Remote Play
+      dedicatedServer.openFirewall = true; # Open ports in the firewall for Source Dedicated Server
+      localNetworkGameTransfers.openFirewall = true; # Open ports in the firewall for Steam Local Network Game Transfers
+    };
+  };
+}

modules/nixos/wallpaper-engine-kde-plugin/default.nix

@@ -0,0 +1,71 @@
+{ lib, pkgs, inputs, config, namespace, ... }:
+
+let
+  # Import the plugin as a package derivation from your local repo
+  # Pass the 'inputs' parameter explicitly to make wallpaper-engine-plugin-src available
+  wallpaperEnginePkg = pkgs.callPackage ../../../packages/wallpaper-engine-kde-plugin/default.nix { inherit inputs; };
+in {
+  options.${namespace}.wallpaper-engine-kde-plugin.enable =
+    lib.mkEnableOption "Enable Wallpaper Engine KDE plugin";
+
+  config = lib.mkIf config.${namespace}.wallpaper-engine-kde-plugin.enable {
+    # Add the imported package and helper script to systemPackages
+    environment.systemPackages = [ 
+      wallpaperEnginePkg 
+      (pkgs.writeShellScriptBin "wallpaper-engine-kde-setup" ''
+        #!/usr/bin/env bash
+        set -e
+        
+        STEAM_DIR="$HOME/.local/share/Steam"
+        WORKSHOP_PATH="$STEAM_DIR/steamapps/workshop/content/431960"
+        
+        echo "Wallpaper Engine KDE Plugin Setup Helper"
+        echo "========================================"
+        
+        # Check if Steam directory exists
+        if [ -d "$STEAM_DIR" ]; then
+          echo "✅ Steam directory found at: $STEAM_DIR"
+          
+          if [ -d "$WORKSHOP_PATH" ]; then
+            echo "✅ Workshop content directory found at: $WORKSHOP_PATH"
+            echo "   You can use this path in the wallpaper settings."
+          else
+            echo "⚠️  Workshop content directory not found at the expected location."
+            echo "   Please locate your Steam workshop content for Wallpaper Engine (app ID 431960)"
+          fi
+        else
+          echo "⚠️  Steam directory not found at: $STEAM_DIR"
+          echo "   Please install Steam and Wallpaper Engine first."
+        fi
+        
+        # Check symlinks
+        if [ -L "$HOME/.local/share/plasma/wallpapers/com.github.catsout.wallpaperEngineKde" ]; then
+          echo "✅ Plugin symlink is correctly set up"
+        else
+          echo "⚠️  Plugin symlink not found, attempting to create it..."
+          mkdir -p "$HOME/.local/share/plasma/wallpapers"
+          ln -sf /run/current-system/sw/share/plasma/wallpapers/com.github.catsout.wallpaperEngineKde \
+                "$HOME/.local/share/plasma/wallpapers/com.github.catsout.wallpaperEngineKde"
+          echo "   Done! Symlink created."
+        fi
+        
+        echo ""
+        echo "To use Wallpaper Engine wallpapers in KDE:"
+        echo "1. Right-click on desktop → Configure Desktop and Wallpaper"
+        echo "2. Select 'Wallpaper Engine' from the wallpaper type list"
+        echo "3. Set the path to your workshop content directory"
+      '')
+    ];
+
+    systemd.user.services.wallpaperEngineSymlink = {
+      description = "Symlink Wallpaper Engine plugin for Plasma";
+      wantedBy = [ "graphical-session.target" ];
+      serviceConfig = {
+        Type = "oneshot";
+        ExecStartPre = "${pkgs.coreutils}/bin/mkdir -p %h/.local/share/plasma/wallpapers";
+        ExecStart = "${pkgs.coreutils}/bin/ln -sfn /run/current-system/sw/share/plasma/wallpapers/com.github.catsout.wallpaperEngineKde %h/.local/share/plasma/wallpapers/com.github.catsout.wallpaperEngineKde";
+        RemainAfterExit = true;
+      };
+    };
+  };
+}

overlays/openldap-testfailure-fix/default.nix

@@ -0,0 +1,7 @@
+{ ... }:
+
+final: prev: {
+  openldap = prev.openldap.overrideAttrs {
+    doCheck = !prev.stdenv.hostPlatform.isi686;
+  };
+}

overlays/vscode-modernized/default.nix

@@ -0,0 +1,105 @@
+# overlays/vscode-modernized/default.nix
+{ ... }:
+
+final: prev:
+
+let
+  modernized = prev.fetchFromGitHub {
+    owner = "Sukarth";
+    repo = "VS-Code-Modernized";
+    # Pin this once working.
+    rev = "main";
+    hash = "sha256-QSmdmCoF2L42ZUxYpJXq6REOdNObK9DBI6c0GEQ32rQ=";
+  };
+
+  injectModernized = vscodePkg:
+    vscodePkg.overrideAttrs (old: {
+      postInstall = (old.postInstall or "") + ''
+        (
+          set -euo pipefail
+
+          candidates=(
+            "$out/lib/vscode/resources/app/out/vs/code/electron-sandbox/workbench/workbench.html"
+            "$out/lib/vscode/resources/app/out/vs/code/electron-sandbox/workbench/workbench.esm.html"
+            "$out/lib/vscode/resources/app/out/vs/code/electron-browser/workbench/workbench.html"
+            "$out/lib/vscode/resources/app/out/vs/code/electron-browser/workbench/workbench.esm.html"
+          )
+
+          workbench=""
+          for candidate in "''${candidates[@]}"; do
+            if [ -f "$candidate" ]; then
+              workbench="$candidate"
+              break
+            fi
+          done
+
+          if [ -z "$workbench" ]; then
+            echo "VS Code Modernized: could not find workbench.html" >&2
+            find "$out/lib/vscode/resources/app/out/vs" -name 'workbench*.html' -print >&2 || true
+            exit 1
+          fi
+
+          # Build one self-contained CSS file.
+          cat > /tmp/vscode-modernized-inline.css <<'EOF'
+/* VS Code Modernized dynamic settings */
+:root {
+  --vscode-modernized-spacing: 0.35rem;
+  --vscode-modernized-border-radius: 0.5rem;
+  --vscode-modernized-tab-spacing: 0.2rem;
+}
+EOF
+
+          cat "${modernized}/styles/styles.css" >> /tmp/vscode-modernized-inline.css
+
+          # Smoke-test styles. Remove later if you want.
+          cat >> /tmp/vscode-modernized-inline.css <<'EOF'
+
+/* Modernized dims inactive icons to 20%; let the theme control contrast instead. */
+.monaco-workbench .part.activitybar .monaco-action-bar .action-item.icon:not(.disabled) {
+  opacity: 1;
+}
+
+/* Nix smoke test: these should be very visible */
+.monaco-workbench .part.sidebar,
+.monaco-workbench .part.auxiliarybar,
+.monaco-workbench .part.panel,
+.monaco-workbench .editor-group-container,
+.monaco-workbench .tabs-container,
+.monaco-workbench .tab,
+.monaco-workbench .monaco-list-row,
+.monaco-workbench .quick-input-widget {
+  border-radius: var(--vscode-modernized-border-radius) !important;
+  overflow: hidden !important;
+}
+
+.monaco-workbench .part.sidebar,
+.monaco-workbench .part.panel,
+.monaco-workbench .editor-group-container {
+  margin: var(--vscode-modernized-spacing) !important;
+}
+EOF
+
+          css="$(sed \
+            -e 's/&/\&amp;/g' \
+            -e 's/</\&lt;/g' \
+            -e 's/>/\&gt;/g' \
+            /tmp/vscode-modernized-inline.css)"
+
+          inject="
+<!-- VS Code Modernized - Nix injected -->
+<style id=\"vscode-modernized-nix\">
+$css
+</style>
+<!-- /VS Code Modernized - Nix injected -->
+"
+
+          substituteInPlace "$workbench" \
+            --replace-fail '</html>' "$inject
+</html>"
+        )
+      '';
+    });
+in
+{
+  vscode-modernized = injectModernized prev.vscode;
+}

packages/cs-demo-manager/default.nix

@@ -0,0 +1,43 @@
+{ lib
+, stdenv
+, fetchurl
+, appimageTools
+, postgresql
+, procps
+, ...
+}:
+
+let
+  pname = "cs-demo-manager";
+  version = "3.18.2";
+
+  src = fetchurl {
+    url = "https://github.com/akiver/cs-demo-manager/releases/download/v${version}/CS-Demo-Manager-${version}.AppImage";
+    hash = "sha256-REEhqvfYSKD7EyIYJVlbkQu0h5FZcofc8X7Zhu1xZnA="; # You need to add the hash after first build attempt
+  };
+
+  appimageContents = appimageTools.extract {
+    inherit pname version src;
+  };
+in
+appimageTools.wrapType2 {
+  inherit pname version src;
+
+  extraPkgs = pkgs: [ postgresql procps  ];
+
+  extraInstallCommands = ''
+    install -m 444 -D ${appimageContents}/cs-demo-manager.desktop $out/share/applications/cs-demo-manager.desktop
+    install -m 444 -D ${appimageContents}/cs-demo-manager.png $out/share/icons/hicolor/512x512/apps/cs-demo-manager.png
+
+    substituteInPlace $out/share/applications/cs-demo-manager.desktop \
+      --replace 'Exec=AppRun' 'Exec=${pname}'
+  '';
+
+  meta = with lib; {
+    description = "An application to manage Counter-Strike demos";
+    homepage = "https://github.com/akiver/cs-demo-manager";
+    license = licenses.gpl2Plus;
+    platforms = [ "x86_64-linux" ];
+    maintainers = [ ];
+  };
+}

packages/droidcam-obs/default.nix

@@ -0,0 +1,46 @@
+{
+  lib,
+  pkgs,
+  stdenv,
+  fetchurl,
+  autoPatchelfHook,
+  namespace,
+  ...
+}:
+
+stdenv.mkDerivation rec {
+  pname = "droidcam-obs";
+  version = "2.4.1";
+
+  src = fetchurl {
+    url = "https://github.com/dev47apps/droidcam-obs-plugin/releases/download/${version}/droidcam_obs_${version}_linux_x86_64.zip";
+    sha256 = "sha256-18IjC3+WR5XLo464RuwAtWRNSpQcsnarXu56CrxCMhM=";
+  };
+
+  nativeBuildInputs = [ pkgs.unzip autoPatchelfHook ];
+  
+  buildInputs = with pkgs; [
+    stdenv.cc.cc.lib
+    obs-studio
+  ];
+
+  dontBuild = true;
+
+  installPhase = ''
+    runHook preInstall
+    mkdir -p $out/lib/obs-plugins
+    mkdir -p $out/share/obs/obs-plugins/droidcam-obs
+    
+    cp bin/64bit/*.so $out/lib/obs-plugins/
+    cp -r data/* $out/share/obs/obs-plugins/droidcam-obs/
+    
+    runHook postInstall
+  '';
+
+  meta = with lib; {
+    description = "DroidCam OBS Plugin - Use your phone as a camera in OBS (FFmpeg 7 compatible)";
+    homepage = "https://www.dev47apps.com/obs/";
+    license = licenses.unfree;
+    platforms = platforms.linux;
+  };
+}

packages/linux-wallpaperengine/default.nix

@@ -0,0 +1,135 @@
+{
+  lib,
+  stdenv,
+  fetchFromGitHub,
+  autoPatchelfHook,
+  cmake,
+  file,
+  pkg-config,
+  python3,
+  SDL2,
+  SDL2_mixer,
+  cef-binary,
+  egl-wayland,
+  ffmpeg,
+  fftw,
+  glew,
+  glfw,
+  glm,
+  gmp,
+  kissfftFloat,
+  libxau,
+  libxdmcp,
+  libxpm,
+  libxrandr,
+  libxxf86vm,
+  libdecor,
+  libffi,
+  libglut,
+  libpng,
+  libpulseaudio,
+  lz4,
+  mpv,
+  wayland,
+  wayland-protocols,
+  wayland-scanner,
+  zlib,
+  nix-update-script,
+  inputs,
+  namespace, ...
+}:
+
+let
+  cef = cef-binary.override {
+    version = "135.0.17"; # follow upstream. https://github.com/Almamu/linux-wallpaperengine/blob/b39f12757908eda9f4c1039613b914606568bb84/CMakeLists.txt#L47
+    gitRevision = "cbc1c5b";
+    chromiumVersion = "135.0.7049.52";
+
+    srcHashes = {
+      aarch64-linux = "sha256-LK5JvtcmuwCavK7LnWmMF2UDpM5iIZOmsuZS/t9koDs=";
+      x86_64-linux = "sha256-JKwZgOYr57GuosM31r1Lx3DczYs35HxtuUs5fxPsTcY=";
+    };
+  };
+in
+stdenv.mkDerivation (finalAttrs: {
+  pname = "linux-wallpaperengine";
+  version = "0-unstable-2025-12-19";
+
+  src = fetchFromGitHub {
+    owner = "Almamu";
+    repo = "linux-wallpaperengine";
+    rev = "f79c29f067b2613895419e351033582464577154";
+    fetchSubmodules = true;
+    hash = "sha256-AISdouVqMXTYErQoT7oM5H+vlrw03NtpI9FqDwZ0J9A=";
+  };
+
+  nativeBuildInputs = [
+    autoPatchelfHook
+    cmake
+    file
+    pkg-config
+    python3
+  ];
+
+  buildInputs = [
+    SDL2
+    SDL2_mixer
+    egl-wayland
+    ffmpeg
+    fftw
+    glew
+    glfw
+    glm
+    gmp
+    kissfftFloat
+    libxau
+    libxdmcp
+    libxpm
+    libxrandr
+    libxxf86vm
+    libdecor
+    libffi
+    libglut
+    libpng
+    libpulseaudio
+    lz4
+    mpv
+    wayland
+    wayland-protocols
+    wayland-scanner
+    zlib
+  ];
+
+  cmakeFlags = [
+    "-DCEF_ROOT=${cef}"
+    "-DCMAKE_INSTALL_PREFIX=${placeholder "out"}/share/linux-wallpaperengine"
+  ];
+
+  postInstall = ''
+    rm -rf $out/bin $out/lib $out/include
+    chmod 755 $out/share/linux-wallpaperengine/linux-wallpaperengine
+    mkdir $out/bin
+    ln -s $out/share/linux-wallpaperengine/linux-wallpaperengine $out/bin/linux-wallpaperengine
+  '';
+
+  preFixup = ''
+    find $out/share/linux-wallpaperengine -type f -exec file {} \; | grep 'ELF' | cut -d: -f1 | while read -r elf_file; do
+      patchelf --shrink-rpath --allowed-rpath-prefixes "$NIX_STORE" "$elf_file"
+    done
+  '';
+
+  passthru.updateScript = nix-update-script { extraArgs = [ "--version=branch" ]; };
+
+  meta = {
+    description = "Wallpaper Engine backgrounds for Linux";
+    homepage = "https://github.com/Almamu/linux-wallpaperengine";
+    license = lib.licenses.gpl3Plus;
+    mainProgram = "linux-wallpaperengine";
+    maintainers = [ ];
+    platforms = [
+      "x86_64-linux"
+      "aarch64-linux"
+    ];
+    hydraPlatforms = [ "x86_64-linux" ]; # Hydra "aarch64-linux" fails with "Output limit exceeded"
+  };
+})

packages/rounded-blur/default.nix

@@ -0,0 +1,89 @@
+{
+  lib,
+  stdenv,
+  fetchFromGitHub,
+  meson,
+  ninja,
+  pkg-config,
+  gobject-introspection,
+  glib,
+  gnome,
+  mutter,
+  cairo,
+  gsettings-desktop-schemas,
+  wayland,
+  libglvnd,
+  libxfixes,
+  libxi,
+  atk,
+  libxkbcommon,
+  clutter,
+  cmake,
+  gnome-shell,
+  lcms2,
+}:
+
+stdenv.mkDerivation {
+  pname = "gnome-rounded-blur";
+  version = "unstable-2026-06-11";
+
+  src = fetchFromGitHub {
+    owner = "kancko";
+    repo = "gnome-rounded-blur";
+    # Replace this with a fixed commit.
+    rev = "master";
+    # Run once with lib.fakeHash, then replace with the real hash.
+    hash = "sha256-MBeb0/Drt0UQ/K8UaW93ae9OaV3L5nhFZB2tPwj47co=";
+  };
+
+  nativeBuildInputs = [
+    meson
+    ninja
+    pkg-config
+    gobject-introspection
+    cmake
+  ];
+
+  buildInputs = [
+    glib
+    mutter
+    cairo
+    gsettings-desktop-schemas
+    wayland
+    libglvnd
+    libxfixes
+    libxi
+    atk
+    libxkbcommon
+    clutter
+    (lib.getDev mutter)
+    (lib.getLib mutter)
+    (lib.getDev gnome-shell)
+    (lib.getLib gnome-shell)
+    lcms2 # required by mutter-clutter
+  ];
+  postFixup = ''
+    for libfile in $out/lib/libblur-effect-1.0.so*; do
+      if [ -f "$libfile" ] && [ ! -L "$libfile" ]; then
+        patchelf --set-rpath "${
+          lib.makeLibraryPath [
+            glib
+            wayland
+            (lib.getLib mutter)
+          ]
+        }:$out/lib" "$libfile"
+      fi
+    done
+  '';
+  # The upstream meson file installs:
+  # - libblur-effect-1.0.so*
+  # - Blur-1.0.gir
+  # - Blur-1.0.typelib
+  # See src/meson.build.
+  meta = {
+    description = "Rounded blur GObject library for GNOME Shell extensions";
+    homepage = "https://github.com/kancko/gnome-rounded-blur";
+    license = lib.licenses.gpl3Plus;
+    platforms = lib.platforms.linux;
+  };
+}

packages/rounded-windows-bms/default.nix

@@ -0,0 +1,53 @@
+{
+  lib,
+  stdenvNoCC,
+  fetchFromGitHub,
+  glib,
+}:
+
+stdenvNoCC.mkDerivation rec {
+  pname = "rounded-windows-bms";
+  version = "2.2.0-bms-fix";
+
+  src = fetchFromGitHub {
+    owner = "MeguMario";
+    repo = "rounded-windows";
+    rev = "bms-fix";
+
+    # Put a fake hash first; Nix will tell you the real one.
+    hash = "sha256-5llnqW1dK3jsMRfvxb1VrSkZ/DSXsfU3PiNmpbb5CLw=";
+  };
+
+  nativeBuildInputs = [
+    glib
+  ];
+
+  installPhase = ''
+    runHook preInstall
+
+    uuid="rounded-windows@marcosgt.github.io"
+    extension_dir="$out/share/gnome-shell/extensions/$uuid"
+
+    mkdir -p "$extension_dir"
+
+    cp metadata.json extension.js effect.js prefs.js stylesheet.css "$extension_dir/"
+
+    mkdir -p "$extension_dir/schemas"
+    cp schemas/*.xml "$extension_dir/schemas/"
+
+    glib-compile-schemas "$extension_dir/schemas"
+
+    runHook postInstall
+  '';
+
+  passthru = {
+    extensionUuid = "rounded-windows@marcosgt.github.io";
+  };
+
+  meta = {
+    description = "Rounded Window Corners GNOME extension with Blur-My-Shell compatibility fix";
+    homepage = "https://github.com/MeguMario/rounded-windows/tree/bms-fix";
+    license = lib.licenses.gpl3Only;
+    platforms = lib.platforms.linux;
+  };
+}

packages/udev-steelseries/default.nix

@@ -0,0 +1,48 @@
+{
+    # Snowfall Lib provides a customized `lib` instance with access to your flake's library
+    # as well as the libraries available from your flake's inputs.
+    lib,
+    # You also have access to your flake's inputs.
+    inputs,
+
+    # The namespace used for your flake, defaulting to "internal" if not set.
+    namespace,
+
+    # All other arguments come from NixPkgs. You can use `pkgs` to pull packages or helpers
+    # programmatically or you may add the named attributes as arguments here.
+    pkgs,
+    stdenv,
+    fetchFromGitHub,
+    ...
+}:
+
+stdenv.mkDerivation {
+  pname = "steelseries-udev-rules";
+  version = "unstable-2024-11-10";
+
+  src = fetchFromGitHub {
+    owner = "MiddleMan5";
+    repo = "steelseries-linux";
+    rev = "d93dfdb6daeec150578e85e25b2e9df79e9539b7";
+    sha256 = "sha256-yPw8QFKhlqb6lxQyYjBz34pEEfTVk1Yp9jFWdX5yH2k=";
+  };
+
+  dontBuild = true;
+  dontConfigure = true;
+
+  installPhase = ''
+    mkdir -p $out/lib/udev/rules.d
+    cp resources/98-steelseries.rules $out/lib/udev/rules.d/98-steelseries.rules
+    mkdir -p $out/etc/udev/rules.d
+    cp resources/98-steelseries-init.py $out/etc/udev/rules.d/98-steelseries-init.py
+    chmod +x $out/etc/udev/rules.d/98-steelseries-init.py
+  '';
+
+  meta = with lib; {
+    description = "udev rules for Steelseries devices";
+    license = licenses.unfree;
+    maintainers = with maintainers; [ asymmetric ];
+    platforms = platforms.linux;
+    homepage = "https://github.com/MiddleMan5/steelseries-linux";
+  };
+}

secrets.yaml

@@ -0,0 +1,51 @@
+private-keys:
+    andreas: ENC[AES256_GCM,data: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,iv:lvlaQwEzDpvdSjH6Z4NrzABifyVP5jyzERHP72CSbis=,tag:rmSINraNXFZElfFHZDqeeQ==,type:str]
+andreas-password: ENC[AES256_GCM,data:XBvfrBSrlKzpO9vgmwQYJshlJH1OCMrcdfYMvp32ZOFZSf4/GrM/FRaatS7to+0ZgJlLNt+npSK0nwV8NXvwgHgN8bsuDiL7KQ==,iv:lD0ruX5AVKVfdA0/vpeUAPf5cTSExyaF8VWebFkbXV8=,tag:nAuwEkHGtlEzu8Qbe0ECdA==,type:str]
+#ENC[AES256_GCM,data:aX2EVkOK7ivoDTzSMmonY64dU6mnRjE83sA3MFIPnzeJ5snZN8WY9PF1CmkDU/ZVB+j9Law=,iv:sPfVyBuGCyd/Y9Lw9cl0akA2IUE5/Yi5C07dh6Ioyu0=,tag:tOT5uHVdgYG+/E4ye0QcFg==,type:comment]
+#ENC[AES256_GCM,data:djH8vAA+TvvbA/Jsuvca7E4o6pYTfKGGdK4=,iv:5Dw0niDhi7P6P9XRz2qgSL3CxpiXBtIsekOMycroLrA=,tag:OSvPPgq0kV4JskrQ86Qp5A==,type:comment]
+#ENC[AES256_GCM,data:C1BstOPXnCf4Cr8UlanCegA=,iv:k9Me959xb6Weg/yArAIg5kWH36se/yyGWNQUu314uw0=,tag:x0bTh0bsYxbCX5GObsGI5g==,type:comment]
+#ENC[AES256_GCM,data:Q0vsUrzlOgDICeIxXtc=,iv:gR8sYrtE/v9GGDEO2nj/v5IHr9ycXhvv1VcB/dEH/FU=,tag:FBde9vkRM/drFtpTWfLcNg==,type:comment]
+#ENC[AES256_GCM,data:LoKuLBSze19z0U/45DBFt6aEJBs=,iv:Btk0sBgj8h5Qk5eYNwPHULuhPu0nXSXE2iR4UVFcBeA=,tag:S2I9HQkeo/jJboy44vrgCw==,type:comment]
+#ENC[AES256_GCM,data:wDZ6Ln5teASPxXPvQGRZCdBIvfY=,iv:Qnx32skeDMB21GwhXd5fImkHS+y+HUOdNvbMT2mpy6A=,tag:BKl04542M8rH6BpFERqHZg==,type:comment]
+#ENC[AES256_GCM,data:f+g7qdm8xf/wDhQqlnzIdmHhzfOG73VWfdw=,iv:/kDspwnXH7QfhzUuHATQTniLm/ZX6mo/QGxyQXdubcY=,tag:muoXeMNHb5vqm8IoC6Gl4A==,type:comment]
+#ENC[AES256_GCM,data:42kR+DANphdxNVWNlxePU8U=,iv:JeZgMtb7a+/7V5hruQIHio0Aj+ThpHZwajx10e0rqOA=,tag:Ln+7DFl6+aq4YLZ8GK9qOg==,type:comment]
+#ENC[AES256_GCM,data:DjK/fZDWEaa2BA==,iv:AnceR62V3OJrn5utgdffMcC+mWdxsUYMYn6454SVCsY=,tag:MRa8cDMEMGtBCxvqcKy/0Q==,type:comment]
+#ENC[AES256_GCM,data:jqzidzai+6ShhzM=,iv:PDjUgLaoFVxAWBLXfWkXRzBp5BuvGU7DCorRYY6dan0=,tag:dKa2O7n/jno/M5nzCzCD/w==,type:comment]
+sops:
+    kms: []
+    gcp_kms: []
+    azure_kv: []
+    hc_vault: []
+    age:
+        - recipient: age19j24x89dfh4f7v58c8k64yupqas4f7qkkyper7yj9dd7vqwvvq0qkyvhxk
+          enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB4U204eXIyaDJFMXIweXp1
+            NEhoYU5qa3B5Q1VpODNsSEpuT0txRWpuVDM0CmptVHNFQkpWTkJ2M3B4dWpWN0s4
+            ZjRuc3BhckVLSzFuOGJ3WTB0YnRRRDgKLS0tIHlaSUxITUlGU3VaRWZFbENUTVY2
+            SWVwUGVxcGJscG5PalphZFVIS1ZjY2MKi4VvrNW1AH+fJaI/rzOltPylSiY1z3nS
+            ebrYdpyM5KKQ46uezvU4J3Qau/Inv8CkZ72vHlQ6EK2kmmZZLszwJg==
+            -----END AGE ENCRYPTED FILE-----
+        - recipient: age1ma8x6wugvc40mkst33mejq0m6r44jk6zwjjun3znyer5nztgn9vs0nwjx4
+          enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSAyVHVwMEZjVk8xMTNIekF1
+            ZFlZbFhvOTJSbVN4ZmorSmFCbkxBUUxOOERJCjBjMkdxQ0V4OXEwdGF2Sno4VTh2
+            MURQMUhQV083M3lpREFRM2Qza3JLN0kKLS0tIEFoeUVsL3poajljMDEwTCtWcXRD
+            Y3NHNmVDZFZuNjlUUDdMa3N3ZVNTWkUKeO4sT0ZyTAyrMKj27fbFhQZ+bDMru6Bk
+            j4Im41l9ClpIVQt8iz61mwKrm+QmBA9r1aL34u3lGQyKBOk4vq/m9A==
+            -----END AGE ENCRYPTED FILE-----
+        - recipient: age1s5qwsuc3e4m3c4w5hl6tyja70w273gr60j9j9dcpc6mz69lemg3qpwud3h
+          enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBUT3dKNk4rSVZUck5LZ2t1
+            eUhPSXBURUFGbnU4NUtjMVVpeGI5eVI1SVc4CkdTY25jTy91VFhLS1F3V3ZzM1A4
+            OGMxWmtWd1lVU3dZcG8xWlRwYkorSU0KLS0tIE12WlFyUWZ0dHYvTEd0N0tPWUt1
+            bldpMnp5cnpXN2J5MEc5cC9DZktEekUKC6sei7v252fZyW8sd1xuZDjwoJFCKGot
+            t9f+jUDOx5wGlH53Fd2jCRArKZkQ850sFj79Lh2Rx6wbDj1Ks5XcVA==
+            -----END AGE ENCRYPTED FILE-----
+    lastmodified: "2024-12-10T04:12:19Z"
+    mac: ENC[AES256_GCM,data:AcuCxKGm9xLgn/gnk0XDVtLM5PWQvgGd+qXusuvwCUV4ln1//Lpwpp3TL0mEMdwEcFOdCasW4A10rGpCoBqKsckroiUSEB0G2p0vrD3b3Vmo804JYcKmSZ85InZCXUWenfOTEzx/A1ruqSBSkRYro+NdyZ/+JXQVXnTLCPesgwE=,iv:UPRNsfeUKnml9OFkkqrI0fI4f/RWN2ovTsaItwT8Y0c=,tag:75NEPjeAXUwlCPGbLPhPFg==,type:str]
+    pgp: []
+    unencrypted_suffix: _unencrypted
+    version: 3.9.1

shell.nix

@@ -0,0 +1,29 @@
+let
+  nixpkgs = fetchTarball "https://github.com/NixOS/nixpkgs/tarball/nixos-24.05";
+  pkgs = import nixpkgs { config = { }; overlays = [ ]; };
+in
+
+pkgs.mkShellNoCC {
+  packages = with pkgs; [
+    cowsay
+    lolcat
+    # bitwarden-desktop #replaced bitwarden
+    bitwarden-cli
+    sops
+  ];
+
+  GREETING = "Hello, Nix!";
+
+  shellHook = ''
+    echo $GREETING | cowsay | lolcat
+    bw config server https://vault.subsonics.nl
+    echo "please enter bitwarden email"
+    read BW_USER
+    echo "please enter bitwarden password"
+    read -s BW_PASSWORD
+    bw login $BW_USER $BW_PASSWORD
+    BW_SESSION="$(bw unlock $BW_PASSWORD --raw)"
+    mkdir -p ~/.config/sops/age
+    bw get attachment keys.txt --itemid ee6a90b0-4120-46f7-a1c6-9648316e43d5 --output ~/.config/sops/age/keys.txt
+  '';
+}

systems/x86_64-linux/drivebystation-nix/configuration.nix

@@ -0,0 +1,319 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+
+{ 
+  # config,
+  pkgs, 
+  ... 
+  }:
+
+{
+  imports = [
+    ./tigervnc.nix
+    ./hardware/hardware-configuration.nix
+  ];
+
+
+  # Use the default kernel maintained by the stable nixpkgs release.
+  boot.kernelPackages = pkgs.linuxPackages;
+
+  # Bootloader.
+  # boot.loader.systemd-boot.enable = true; # managed by lanzaboote
+  boot.loader.efi.canTouchEfiVariables = true;
+  nix.settings.experimental-features = [ "nix-command" "flakes" ];
+  networking.hostName = "drivebystation-nix"; # Define your hostname.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Enable networking
+  networking.networkmanager.enable = true;
+
+  # Set your time zone.
+  time.timeZone = "Europe/Amsterdam";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_US.UTF-8";
+
+  i18n.extraLocaleSettings = {
+    LC_ADDRESS = "nl_NL.UTF-8";
+    LC_IDENTIFICATION = "nl_NL.UTF-8";
+    LC_MEASUREMENT = "nl_NL.UTF-8";
+    LC_MONETARY = "nl_NL.UTF-8";
+    LC_NAME = "nl_NL.UTF-8";
+    LC_NUMERIC = "nl_NL.UTF-8";
+    LC_PAPER = "nl_NL.UTF-8";
+    LC_TELEPHONE = "nl_NL.UTF-8";
+    LC_TIME = "nl_NL.UTF-8";
+  };
+  system.activationScripts."stremio-mpv-flatpak-patch" = {
+      text = ''
+        # 1. Provide the symlink where Stremio's player engine queries
+        mkdir -p /usr/bin
+        ln -sf /run/current-system/sw/bin/mpv /usr/bin/mpv
+
+        # 2. Locate and patch the runtime server.js file inside the active Flatpak installation
+        TARGET_FILE="/var/lib/flatpak/app/com.stremio.Stremio/current/active/files/opt/stremio/server.js"
+        
+        if [ -f "$TARGET_FILE" ]; then
+          # Make sure the file is writable momentarily for the patch
+          chmod +w "$TARGET_FILE"
+          
+          # Inject the flatpak-spawn sequence into the linux player profile
+          sed -i 's|linux:{path:\["\/usr\/bin\/mpv"\]|linux:{path:["/usr/bin/flatpak-spawn"],args:["--host","/usr/bin/mpv"]|g' "$TARGET_FILE"
+          sed -i 's|linux:{path:\["mpv"\]|linux:{path:["/usr/bin/flatpak-spawn"],args:["--host","/usr/bin/mpv"]|g' "$TARGET_FILE"
+          
+          # Restore permissions
+          chmod -w "$TARGET_FILE"
+        fi
+      '';
+    };
+  services = {
+    # Enable Gnome Session
+    displayManager.gdm.enable = true;
+    displayManager.sddm.enable = false;
+    # displayManager.sddm.wayland.enable = true;
+    displayManager.autoLogin = {
+      enable = false;
+      user = "andreas";
+    };
+
+    displayManager.cosmic-greeter.enable = false;
+    displayManager.defaultSession = "gnome";
+    # Clear the sandbox restriction dynamically
+    
+    xserver = {
+      enable = true; # Enable the deprecated X11 teletype terminal connection system. 
+      # Configure Display Manager
+      displayManager = {
+        lightdm.enable = false;
+      };
+      # Configure keymap in X11
+      xkb = {
+        layout = "us";
+        variant = "intl";
+      };
+      
+      # Specify first device section to use nvidia GPU
+
+    };
+  };
+  # services.xserver.displayManager.defaultSession = "gnome-x11";  # services.xserver.displayManager.autoLogin.enable = true;
+  # services.xserver.displayManager.autoLogin.user = "andreas";
+  # systemd.services."getty@tty1".enable = false;
+  # systemd.services."autovt@tty1".enable = false;
+
+  programs.ssh.askPassword = "${pkgs.x11_ssh_askpass}/libexec/x11-ssh-askpass";
+
+  # Configure console keymap
+  console.keyMap = "us-acentos";
+
+  # Enable CUPS to print documents.
+  services.printing.enable = true;
+
+  # Enable sound with pipewire.
+  services.pulseaudio.enable = false;
+  security.rtkit.enable = true;
+  services.pipewire = {
+    enable = true;
+    alsa.enable = true;
+    alsa.support32Bit = true;
+    pulse.enable = true;
+    # If you want to use JACK applications, uncomment this
+    jack.enable = true;
+
+    # use the example session manager (no others are packaged yet so this is enabled by default,
+    # no need to redefine it in your config for now)
+    #media-session.enable = true;
+  };
+
+  # Enable gamemode for game optimization
+  programs.gamemode.enable = true;
+
+  # Enable touchpad support (enabled default in most desktopManager).
+  # services.xserver.libinput.enable = true;
+
+  # Install firefox.
+  programs.firefox.enable = true;
+
+  # Enable XWayland for X11 application compatibility
+  programs.xwayland.enable = true;
+
+  # docker
+  virtualisation.docker = {
+    enable = true;
+  };
+
+
+  # Allow unfree packages
+  nixpkgs.config.allowUnfree = true;
+
+  # Enable --Akonadi--/ kde-pim for calendar backend
+  programs.kde-pim.enable = true;
+  services.dbus.enable = true;
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [
+    #  vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+    #  wget
+    (python3.withPackages (ps: with ps; [ websockets ]))
+    sqlite
+    javaPackages.compiler.openjdk25
+    javaPackages.compiler.openjdk21
+    qt6.qtwebengine
+    qemu
+    mpv
+    krita
+    ntfs3g
+    htop
+    rivalcfg
+    blender
+    freecad
+    reaper
+    discord
+    betterdiscordctl
+  ];
+  environment.etc."xdg/autostart/xwaylandvideobridge.desktop".text = ''
+    [Desktop Entry]
+    Hidden=true
+  '';
+
+  services.udisks2.settings = { # Should fix mounting ntfs system partition - Did not work
+    "udisks2.conf" = {
+      defaults = {
+        allow_mount_internal = true;
+        allow_mount_system = true;
+      };
+    };
+  };
+
+  services.gvfs.enable = true; # For file manager integration
+
+  # Enable udev rules for SteelSeries devices (rivalcfg)
+  services.udev.packages = [ pkgs.rivalcfg ];
+
+  # Disable iBus (not needed unless using Asian input methods)
+  i18n.inputMethod = {
+    enable = false;
+  };
+
+  virtualisation.libvirtd = {
+    enable = true;
+    qemu = {
+      package = pkgs.qemu;
+      runAsRoot = true;
+      swtpm.enable = true;
+      vhostUserPackages = [ pkgs.virtiofsd ];
+    };
+  };
+
+
+
+  systemd.tmpfiles.rules = [ "L+ /var/lib/qemu/firmware - - - - ${pkgs.qemu}/share/qemu/firmware" ];
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  services.openssh.enable = true;
+
+  # Open ports in the .
+  networking.firewall.allowedTCPPorts = [
+    24800 #Synergy
+    53317 #localsend
+    3390 #rdp
+    9090
+    8000
+    40122
+  ];
+  networking.firewall.allowedUDPPorts = [
+    24800 #Synergy
+    53317 #localsend
+    3390 #rdp
+    9090
+    8000
+    40122
+  ];
+  networking.firewall.trustedInterfaces = [ "virbr0" ];
+  networking.nat = {
+    enable = true;
+    internalInterfaces = [ "virbr0" ];
+    externalInterface = "enp75s0";
+    extraCommands = ''
+      # MASQUERADE forwarded traffic to VM so it knows how to route back
+      iptables -t nat -A nixos-nat-post -o virbr0 -j MASQUERADE
+    '';
+    forwardPorts = [
+      {
+        sourcePort = 9090;
+        proto = "tcp";
+        destination = "192.168.122.113:9090";
+      }
+      {
+        sourcePort = 9090;
+        proto = "udp";
+        destination = "192.168.122.113:9090";
+      }
+    ];
+  };
+
+  services.mullvad-vpn = {
+    enable = true;
+    package = pkgs.mullvad-vpn;
+  };
+
+  fonts = {
+
+    packages = with pkgs; [
+      noto-fonts
+      noto-fonts-color-emoji
+    ];
+
+    fontconfig = {
+      enable = true;
+
+      defaultFonts = {
+        sansSerif = [ "DejaVu Sans" "Noto Color Emoji" ];
+        serif = [ "DejaVu Serif" "Noto Color Emoji" ];
+        monospace = [ "DejaVu Sans Mono" "Noto Color Emoji" ];
+        emoji = [ "Noto Color Emoji" ];
+      };
+    };
+  };
+  
+  # services.xrdp = {
+  #   enable = true;
+  #   openFirewall = true;
+  #   defaultWindowManager = "cinnamon-session";
+  # };
+  
+  ### tigervnc
+  services.tigervnc = {
+    enable = false;
+    users = {
+      andreas = {
+        localhost = false;  # true for SSH-only
+      };
+    };
+  };
+  ### tigervnc END
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "26.05"; # Did you read the comment?
+
+}

systems/x86_64-linux/drivebystation-nix/default.nix

@@ -0,0 +1,245 @@
+# nixosConfigurations.th0nkpad-nixos = nixpkgs.lib.nixosSystem {
+
+{
+  # Snowfall Lib provides a customized `lib` instance with access to your flake's library
+  # as well as the libraries available from your flake's inputs.
+  lib, 
+  # An instance of `pkgs` with your overlays and packages applied is also available.
+  pkgs, 
+  # You also have access to your flake's inputs.
+  inputs, 
+  # Additional metadata is provided by Snowfall Lib.
+  # The namespace used for your flake, defaulting to "internal" if not set.
+  # namespace, 
+  # The system architecture for this host (eg. `x86_64-linux`).
+  # system, 
+  # The Snowfall Lib target for this system (eg. `x86_64-iso`).
+  # target, 
+  # A normalized name for the system target (eg. `iso`).
+  # format, 
+  # A boolean to determine whether this system is a virtual target using nixos-generators.
+  # virtual, 
+  # An attribute map of your defined hosts.
+  # systems, 
+  # All other arguments come from the system system.
+  # config,
+  ...
+}:
+let
+  # inherit (lib.my-namespace) systemPackages;
+  inherit pkgs;
+  installedPackages = lib.my-namespace.mkPackages pkgs;
+  # Explicit application exceptions; all other packages use stable pkgs.
+  unstablePkgs = import inputs.nixpkgs-unstable {
+    system = pkgs.stdenv.hostPlatform.system;
+    config.allowUnfree = true;
+  };
+in
+{
+  # inherit system;
+  imports = [
+    ./configuration.nix
+    ./mutter-tearing.nix
+    ./video.nix
+    inputs.wallpaperengine.nixosModules.default
+    inputs.aagl.nixosModules.default
+  ];
+  config = {
+      programs.linux-wallpaperengine.enable = true;
+      system.stateVersion = "26.05";
+      nix.settings.experimental-features = [ "nix-command" "flakes" ];
+      # Distrobox
+      my-namespace.distrobox.enable = true;
+      # Desktops
+      my-namespace.desktop-environment.cinnamon.enable = true;
+      my-namespace.desktop-environment.xfce.enable = false;
+      my-namespace.desktop-environment.gnome.enable = true;
+      my-namespace.desktop-environment.kde.enable = false;
+      my-namespace.desktop-environment.hyprland.enable = false;
+      my-namespace.desktop-environment.cosmic.enable = false;
+      my-namespace.performance-tuning.enable = true;
+      my-namespace.rtl8125-recovery.enable = true;
+      my-namespace.file-organization.enable = true;
+      # GNOME-keyring
+      my-namespace.gnome-keyring.enable = true;
+      # CS Tools
+      my-namespace.cs-tools.enable = true;
+      
+      # Define a user account. Don't forget to set a password with ‘passwd’.
+      users.users.andreas = {
+        isNormalUser = true;
+        description = "Andreas Schaafsma";
+        extraGroups = [ 
+          "networkmanager" 
+          "wheel" 
+          "libvirtd" 
+          "plugdev" 
+          "docker" 
+          "gamemode"
+        ];
+        packages = with pkgs; [
+          # Packages from inputsq
+          # inputs.game-of-life.packages.x86_64-linux.default
+          inputs.zen-browser.packages.x86_64-linux.default
+          # inputs.anikki.packages.x86_64-linux.default
+          # We want flatpak support
+          flatpak
+          # GNOME shit
+          thunderbird
+          soundwireserver
+          # vscode 
+          #  discord 
+          spotify
+          appimage-run  
+          prismlauncher #replaces broken minecraft package
+          unstablePkgs.trilium-desktop
+          terraform
+          virt-manager
+          nil
+          codex
+          inputs.codex-desktop.packages.${pkgs.stdenv.hostPlatform.system}.codex-desktop
+          #  thunderbird
+        ];
+        
+      };
+
+      programs.appimage = {
+        enable = true;
+        binfmt = true;
+      };
+
+
+      programs.anime-game-launcher.enable = true; # Adds launcher and /etc/hosts rules
+      programs.anime-games-launcher.enable = true;
+
+      services.gnome.gnome-remote-desktop.enable = true;
+      my-namespace.keychron-keyboard.enable = true;
+
+      # lib.my-namespace.home.stream-tools.enable = true;
+
+      # Open ports in the firewall.
+      networking.firewall.allowedTCPPorts = [
+        59010 #SoundWireServer
+        5901
+        5001
+        11434
+        3389 #RDP
+        22 #ssh
+      ];
+      networking.firewall.allowedUDPPorts = [
+        59010 #SoundWireServer
+        5901
+        5001
+        11434
+        3389 #RDP
+        22 #ssh
+      ];
+      # Or disable the firewall altogether.
+      networking.firewall.enable = false;
+
+
+      # Install firefox.
+      programs.firefox.enable = true;
+      nixpkgs.config.allowBroken = true;
+      powerManagement.cpuFreqGovernor = "performance";
+      # Set up system Packages
+      environment.sessionVariables.GI_TYPELIB_PATH =
+      lib.makeSearchPath "lib/girepository-1.0" [
+        pkgs.my-namespace.rounded-blur
+      ];
+      environment.sessionVariables = {
+        # If you are using Hyprland, labwc, or Sway (wlroots-based):
+        WLR_DRM_NO_ATOMIC = "1"; 
+
+        KWIN_DRM_DISABLE_TRIPLE_BUFFERING="1";
+
+        # If you are using KDE Plasma (KWin):
+        KWIN_FORCE_SW_CURSOR = "1";
+        
+        # For modern wlroots (and Aquamarine in Hyprland) to force software cursors:
+        WLR_NO_HARDWARE_CURSORS = "1"; 
+      };
+      environment.systemPackages = with pkgs; [
+        git
+        wine
+        # bottles
+        gparted
+        ntfs3g 
+        ntfsprogs
+        synergy
+        mangohud
+        my-namespace.udev-steelseries
+        my-namespace.linux-wallpaperengine
+        my-namespace.rounded-blur
+        my-namespace.rounded-windows-bms
+        my-namespace.cs-demo-manager
+        vscode-modernized
+        zed-editor
+        unstablePkgs.jetbrains-toolbox
+
+        (pkgs.writeShellScriptBin "switch-to-desktop" ''
+          #!/bin/sh
+          # Kill Steam and return to display manager
+          pkill steam || true
+          pkill gamescope || true
+          # End the session cleanly
+          loginctl terminate-session "$XDG_SESSION_ID"
+        '')
+        
+        (pkgs.writeShellScriptBin "steamos-session-select" ''
+          #!/bin/sh
+          exec switch-to-desktop
+        '')
+
+        # Vulkan packages for Steam
+        mesa
+        vulkan-loader
+        vulkan-validation-layers
+        vulkan-extension-layer
+        vulkan-tools
+        libva
+        libva-utils
+        #  vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+        #  wget
+      ]
+      ++  installedPackages.packages;
+
+      programs.nix-ld = {
+        enable = true;
+        package = pkgs.nix-ld; #replaces nix-ld-rs
+      };
+
+      services.flatpak.enable = true;
+      systemd.services.flatpak-repo = {
+        wantedBy = [ "multi-user.target" ];
+        path = [ pkgs.flatpak ];
+        script = ''
+          flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
+        '';
+      };
+
+      services.openssh = {
+        enable = true;
+        settings.PasswordAuthentication = true;
+        # settings = {
+        #   # passwordAuthentication = true;
+        # };
+      };
+
+
+      # services.xrdp.enable = true;
+      # services.xrdp.defaultWindowManager = "${pkgs.gnome-session}/bin/gnome-session";
+      # services.xrdp.defaultWindowManager = "startxfce4";
+      # services.xrdp.openFirewall = true;
+      # services.xrdp.audio.enable = false;
+
+
+      # Disable the GNOME3/GDM auto-suspend feature that cannot be disabled in GUI!
+      # If no user is logged in, the machine will power down after 20 minutes.
+
+      # systemd.targets.sleep.enable = false;
+      # systemd.targets.suspend.enable = false;
+      # systemd.targets.hibernate.enable = false;
+      # systemd.targets.hybrid-sleep.enable = false;
+    };
+}

systems/x86_64-linux/drivebystation-nix/hardware/acer-monitor-edid.nix

@@ -0,0 +1,16 @@
+{ config, lib, pkgs, ... }:
+{
+  # boot.kernelParams = [ "drm.edid_firmware=DP-1:edid/edid.bin,DP-2:edid/edid.bin,DP-3:edid/edid.bin,DP-4:edid/edid.bin" ];
+  boot.kernelParams = [ 
+    "drm.edid_firmware=DP-2:edid/edid.bin,DP-4:edid/edid.bin" 
+  ];
+
+
+  hardware.firmware = [
+  (
+    pkgs.runCommand "edid.bin" { } ''
+      mkdir -p $out/lib/firmware/edid
+      cp ${./firmware/KG271-edid.bin} $out/lib/firmware/edid/edid.bin
+    ''
+  )];
+} 

systems/x86_64-linux/drivebystation-nix/hardware/graphics/intel.nix

@@ -0,0 +1,141 @@
+{ config, lib, pkgs, ... }:
+
+{
+  ############################
+  ## Display + Mesa Settings
+  ############################
+
+  # hardware.enableRedistributableFirmware = true;
+
+  hardware.firmware = [
+    pkgs.linux-firmware
+    # pkgs.firmwareLinuxNonfree
+    # pkgs.firmwareLinuxStrict
+    # pkgs.firmwareLinuxLatest
+  ];
+
+  # boot.kernelPackages = pkgs.linuxPackages_latest;
+  boot.kernelParams = [
+    "console=tty0"
+    # "efifb=off"
+    "xe.force_probe=e20b"
+    # Xe stability improvements for B580
+    "xe.guc_log_level=0"           # Reduce GuC logging overhead
+    "xe.enable_display=1"          # Ensure display is enabled
+    # Memory/performance parameters
+    "mitigations=off"              # Disable CPU mitigations for better performance
+    "module_blacklist=nouveau,nvidia,nvidia_drm,nvidia_modeset,nvidia_uvm"
+  ];
+  services.switcherooControl.enable = true;
+  # environment.variables.VK_ICD_FILENAMES = "/run/opengl-driver/share/vulkan/icd.d/intel_icd.x86_64.json";
+  hardware.intel-gpu-tools.enable = true;
+  hardware.graphics = {
+    enable = true;
+    enable32Bit = true;
+
+    extraPackages = with pkgs; [
+      intel-media-driver     # Intel VAAPI
+      vpl-gpu-rt             # oneVPL runtime
+      intel-vaapi-driver     # fallback
+      intel-compute-runtime # OpenCL/Level Zero
+      level-zero            # Level Zero API for compute
+      intel-graphics-compiler # Shader compiler for Arc GPUs allgedly needed for XPU
+    ];
+  };
+
+  # Ensure Arc driver is available (usually auto-loaded)
+  boot.kernelModules = [ "xe" "i915" ];
+  # Blacklist everything for nvidia
+  boot.blacklistedKernelModules = [
+    "nouveau"
+    "nvidia"
+    "nvidia_drm"
+    "nvidia_modeset"
+    "nvidia_uvm"
+  ];
+
+  # Mark Arc B580 as a discrete Intel GPU for switcheroo-control and
+  # keep runtime PCI power management enabled for the device.
+  services.udev.extraRules = ''
+    ACTION=="add|bind", SUBSYSTEM=="pci", ATTR{vendor}=="0x8086", ATTR{device}=="0xe20b", TEST=="power/control", ATTR{power/control}="auto"
+    SUBSYSTEM=="drm", DRIVERS=="xe", ATTRS{vendor}=="0x8086", ATTRS{device}=="0xe20b", TAG+="switcheroo-discrete-gpu"
+  '';
+
+  environment.variables = {
+    # Force Intel GPU for all graphics operations
+    KWIN_DRM_DEVICES = "/dev/dri/card0";
+    
+    # Vulkan/DXVK optimizations for B580
+    ANV_ENABLE_PIPELINE_CACHE = "1";
+    
+    # Shader cache settings
+    MESA_SHADER_CACHE_DISABLE = "false";
+    MESA_SHADER_CACHE_MAX_SIZE = "10G";
+    
+    # DXVK optimizations
+    DXVK_HUD = "compiler";  # Monitor shader compilation
+    # DXVK_ASYNC = "1";     # Enable if you want async shader compilation (may cause issues)
+    
+    # Intel IPEX / PyTorch settings
+    ZE_ENABLE_ALT_DRIVERS = "libze_intel_gpu.so.1";  # Enable Intel GPU driver for Level Zero
+    SYCL_CACHE_PERSISTENT = "1";                      # Enable persistent SYCL cache
+    SYCL_PI_LEVEL_ZERO_USE_IMMEDIATE_COMMANDLISTS = "1";  # Performance optimization
+  };
+
+
+  ############################
+  ## LACT Settings for Overclocking
+  ############################
+
+  services.lact.enable = true;
+
+
+
+  ############################
+  ## X / Wayland GPU Drivers
+  ############################
+  
+  # Enable modesetting driver for X11 (required for Intel Xe)
+  services.xserver.videoDrivers = [ 
+    "modesetting"
+    #"intel"
+  ];
+
+  services.xserver.enable = true;
+  services.xserver.autorun = false;
+  services.xserver.displayManager.startx.enable = true;
+
+  # Xorg configuration for Intel Arc Battlemage (xe driver)
+  # Based on: https://www.reddit.com/r/crtgaming/comments/1knom2t/guide_intel_arc_b580_arch_linux_xorg/
+  # Intel Arc B-series at PCI 0000:03:00.0
+  #services.xserver.deviceSection = ''
+  #  Option "AccelMethod" "glamor"
+  #  BusID "PCI:3:0:0"
+  #'';
+
+  ############################
+  ## User Access
+  ############################
+  users.users.andreas.extraGroups = [ "video" "render" ];
+  
+  ############################
+  ## System Packages for AI/ML
+  ############################
+  environment.systemPackages = with pkgs; [
+    intel-compute-runtime
+    level-zero
+    # For checking GPU compute capabilities
+    clinfo
+    vulkan-tools
+  ];
+  services.xserver.config = ''
+    Section "Device"
+      Identifier "AMD"
+      Driver "amdgpu"
+      Option "TearFree" "false"
+    EndSection
+  '';
+  services.xserver.deviceSection = ''
+    Option "TearFree" "false"
+  '';
+}

systems/x86_64-linux/drivebystation-nix/hardware/graphics/intel_i915.nix

@@ -0,0 +1,90 @@
+{ config, lib, pkgs, ... }:
+
+{
+  ############################
+  ## Display + Mesa Settings
+  ############################
+
+  # hardware.enableRedistributableFirmware = true;
+
+  hardware.firmware = [
+    pkgs.linux-firmware
+    # pkgs.firmwareLinuxNonfree
+    # pkgs.firmwareLinuxStrict
+    # pkgs.firmwareLinuxLatest
+  ];
+
+  # boot.kernelPackages = pkgs.linuxPackages_latest;
+  boot.kernelParams = [
+    "console=tty0"
+    # "efifb=off"
+    # "xe.force_probe=*"
+    "module_blacklist=nouveau,nvidia,nvidia_drm,nvidia_modeset,nvidia_uvm"
+  ];
+
+  # environment.variables.VK_ICD_FILENAMES = "/run/opengl-driver/share/vulkan/icd.d/intel_icd.x86_64.json";
+  hardware.intel-gpu-tools.enable = true;
+  hardware.graphics = {
+    enable = true;
+    enable32Bit = true;
+
+    extraPackages = with pkgs; [
+      intel-media-driver     # Intel VAAPI
+      vpl-gpu-rt             # oneVPL runtime
+      intel-vaapi-driver     # fallback
+      intel-compute-runtime # OpenCL/Level Zero
+    ];
+  };
+
+  # Ensure Arc driver is available (usually auto-loaded)
+  boot.kernelModules = [ "i915" ];
+  # Blacklist everything for nvidia
+  boot.blacklistedKernelModules = [
+    "nouveau"
+    "nvidia"
+    "nvidia_drm"
+    "nvidia_modeset"
+    "nvidia_uvm"
+    "xe"
+  ];
+
+  environment.variables = {
+    KWIN_DRM_DEVICES = "/dev/dri/card0";
+  };
+
+
+  ############################
+  ## LACT Settings for Overclocking
+  ############################
+
+  services.lact.enable = true;
+
+
+
+  ############################
+  ## X / Wayland GPU Drivers
+  ############################
+  
+  # Enable modesetting driver for X11 (required for Intel Xe)
+  services.xserver.videoDrivers = [ 
+    "modesetting"
+    #"intel"
+  ];
+
+  services.xserver.enable = true;
+  services.xserver.autorun = false;
+  services.xserver.displayManager.startx.enable = true;
+
+  # Xorg configuration for Intel Arc Battlemage (xe driver)
+  # Based on: https://www.reddit.com/r/crtgaming/comments/1knom2t/guide_intel_arc_b580_arch_linux_xorg/
+  # Intel Arc B-series at PCI 0000:03:00.0
+  #services.xserver.deviceSection = ''
+  #  Option "AccelMethod" "glamor"
+  #  BusID "PCI:3:0:0"
+  #'';
+
+  ############################
+  ## User Access
+  ############################
+  users.users.andreas.extraGroups = [ "video" "render" ];
+}

systems/x86_64-linux/drivebystation-nix/hardware/graphics/intel_nvidia.nix

@@ -0,0 +1,74 @@
+{ config, lib, pkgs, ... }:
+
+{
+  ############################
+  ## Display + Mesa Settings
+  ############################
+
+  # hardware.enableRedistributableFirmware = true;
+
+  hardware.firmware = [
+    pkgs.linux-firmware
+    # pkgs.firmwareLinuxNonfree
+    # pkgs.firmwareLinuxStrict
+    # pkgs.firmwareLinuxLatest
+  ];
+
+  # boot.kernelPackages = pkgs.linuxPackages_latest;
+
+  boot.kernelParams = [
+    "console=tty0"
+    "efifb=off"
+    "xe.force_probe=*"
+    "nvidia-drm.modeset=1"
+  ];
+
+  hardware.graphics = {
+    enable = true;
+
+    extraPackages = with pkgs; [
+      intel-media-driver     # Intel VAAPI
+      vpl-gpu-rt             # oneVPL runtime
+      intel-vaapi-driver     # fallback
+    ];
+  };
+
+  # Ensure Arc driver is available (usually auto-loaded)
+  boot.kernelModules = [ "xe" ];
+  boot.blacklistedKernelModules = [ "nouveau" ];
+
+  ############################
+  ## X / Wayland GPU Drivers
+  ############################
+  # Only specify NVIDIA. Intel Arc uses the modesetting driver automatically.
+  services.xserver.videoDrivers = [ "nvidia" ];
+
+  ############################
+  ## NVIDIA Configuration
+  ############################
+  hardware.nvidia = {
+    modesetting.enable = true;   # REQUIRED if any displays are on NVIDIA
+
+    open = false;                # GTX 1070 → must be the proprietary driver
+    nvidiaSettings = true;
+
+    powerManagement.enable = false;
+    powerManagement.finegrained = false;
+
+    prime = {
+      offload.enable = false;    # not a laptop, must be disabled
+      sync.enable = false;
+    };
+
+    # Correct way to pick the driver
+    package = config.boot.kernelPackages.nvidiaPackages.production;
+  };
+
+  # Remove → hardware.nvidia handles module packages
+  # boot.extraModulePackages = [ config.boot.kernelPackages.nvidia_x11 ];
+
+  ############################
+  ## User Access
+  ############################
+  users.users.andreas.extraGroups = [ "video" "render" ];
+}

systems/x86_64-linux/drivebystation-nix/hardware/graphics/passthrough_nvidia.nix

@@ -0,0 +1,51 @@
+{ config, lib, system, pkgs, ... }:
+{
+  boot.kernelModules = [
+    "vfio"
+    "vfio-pci"
+    "vfio_iommu_type1"
+  ];
+  boot.kernelParams = [
+    "amd_iommu=on"
+    "iommu=pt"
+  ];
+  # Make sure vfio is available inside initrd
+  boot.initrd.availableKernelModules = [
+    "vfio_pci"
+  ];
+  # Bind by IDs (cleaner via modprobe instead of kernel param)
+  boot.extraModprobeConfig = ''
+    options vfio-pci ids=10de:1b81,10de:10f0
+  '';
+  boot.initrd.systemd = {
+    enable = true;
+    services.initrd-vfio-pci-nvidia = {
+      description = "vfio-pci predevice init";
+      wantedBy = [ "initrd.target" ];
+      # Match 'preDeviceCommands' by running early
+      before = [ "sysroot.mount" ]; 
+      
+      unitConfig.DefaultDependencies = "no";
+      serviceConfig.Type = "oneshot";
+      
+      # Place your original shell commands here
+      script = ''
+        modprobe vfio-pci
+      '';
+    };
+  };
+  # # EARLY and deterministic binding
+  # boot.initrd.preDeviceCommands = ''
+  #   echo 0000:05:00.0 > /sys/bus/pci/drivers/vfio-pci/bind
+  #   echo 0000:05:00.1 > /sys/bus/pci/drivers/vfio-pci/bind
+  # '';
+  environment.systemPackages = with pkgs; [
+    pciutils
+    virtiofsd
+    config.virtualisation.libvirtd.qemu.package
+    looking-glass-client
+    virt-manager
+    libguestfs-with-appliance
+  ];
+  users.extraUsers.andreas.extraGroups = [ "libvirtd" ];
+}

systems/x86_64-linux/drivebystation-nix/hardware/hardware-configuration.nix

@@ -0,0 +1,102 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports = 
+    [ 
+      (modulesPath + "/installer/scan/not-detected.nix")
+      ./graphics/intel.nix
+      ./graphics/passthrough_nvidia.nix
+      # ./graphics/intel_i915.nix
+      # ./graphics/nvidia.nix
+      ./acer-monitor-edid.nix
+      ./samsung-monitor-edid.nix
+    ];
+  hardware.enableRedistributableFirmware = true;
+  boot.loader.efi.canTouchEfiVariables = true;  
+  boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "nvme" "usbhid" "usb_storage" "sd_mod" ];
+  boot.kernelModules = [ "kvm-amd" "r8125" "4vl2loopback" ];
+  boot.extraModulePackages = with config.boot.kernelPackages; [ v4l2loopback r8125 ];
+  boot.supportedFilesystems = [ "ntfs" ];
+  boot.blacklistedKernelModules = [ "r8169" ];
+
+  systemd.services.disable-realtek-eee = {
+    description = "Disable Realtek Energy Efficient Ethernet";
+    wantedBy = [ "multi-user.target" ];
+    after = [ "network.target" ];
+
+    serviceConfig = {
+      Type = "oneshot";
+      ExecStart = "${pkgs.ethtool}/bin/ethtool --set-eee enp10s0 eee off";
+      RemainAfterExit = true;
+    };
+  };
+
+
+  fileSystems."/" =
+    { device = "/dev/disk/by-uuid/31fe479a-f4ef-4ee5-9cd9-d43ed1a3c88b";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    { device = "/dev/disk/by-uuid/646A-D107";
+      fsType = "vfat";
+      options = [ "fmask=0077" "dmask=0077" ];
+    };
+
+  fileSystems."/home" =
+    { device = "/dev/disk/by-uuid/6ac4f42b-09e3-43b3-8215-8ff9a3c0695e";
+      fsType = "ext4";
+    };
+
+  # Mount ntfs partition
+  # fileSystems."/run/media/627C3BDF7C3BAD23" = {
+  #   device = "/dev/disk/by-uuid/627C3BDF7C3BAD23";
+  #   fsType = "ntfs-3g";
+  #   options = [ "rw" "uid=1000"];
+  # };
+
+  # # Mount ntfs oldfiles drive partition
+  # fileSystems."/run/media/oldfiles" = {
+  #   device = "/dev/disk/by-uuid/E2E26FFFE26FD677";
+  #   fsType = "ntfs-3g";
+  #   options = [ "rw" "uid=1000"];
+  # };
+
+  # # Mount The Vault
+  # fileSystems."/run/media/vault" = {
+  #   device = "/dev/disk/by-uuid/3470646370642DB4";
+  #   fsType = "ntfs-3g";
+  #   options = [ "rw" "uid=1000"];
+  # };
+
+
+
+  # Try to fix hibernation
+
+  # swapDevices = [ ];
+  swapDevices = [ {
+    device = "/var/lib/swapfile";
+    size = 32*1024;
+  } ]; #resume-offset = 195323904
+  boot.resumeDevice = "/dev/disk/by-uuid/31fe479a-f4ef-4ee5-9cd9-d43ed1a3c88b";  # the unlocked drive mapping
+  boot.kernelParams = [
+    "resume_offset=195323904"  #sudo filefrag -v /var/lib/swapfile|awk 'NR==4{gsub(/\./,"");print $4;}'
+    "r8125.aspm=0" # realtek network adapter fix
+  ];
+  security.protectKernelImage = false;
+
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still po  ssible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.enp72s0.useDHCP = lib.mkDefault true;
+
+  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
+  hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+
+}

systems/x86_64-linux/drivebystation-nix/hardware/samsung-monitor-edid.nix

@@ -0,0 +1,14 @@
+{ config, lib, pkgs, ... }:
+{
+  # boot.kernelParams = [ "drm.edid_firmware=DP-1:edid/edid.bin,DP-2:edid/edid.bin,DP-3:edid/edid.bin,DP-4:edid/edid.bin" ];
+  boot.kernelParams = [ "drm.edid_firmware=DP-1:edid/edid2.bin" ];
+
+
+  hardware.firmware = [
+  (
+    pkgs.runCommand "edid2.bin" { } ''
+      mkdir -p $out/lib/firmware/edid
+      cp ${./firmware/U32J59x-edid.bin} $out/lib/firmware/edid/edid2.bin
+    ''
+  )];
+} 

systems/x86_64-linux/drivebystation-nix/mutter-50-tearing-compat.patch

@@ -0,0 +1,36 @@
+diff --git a/src/meson.build b/src/meson.build
+--- a/src/meson.build
++++ b/src/meson.build
+@@ -1077,5 +1077,6 @@ wayland_protocols = [
+   ['single-pixel-buffer', 'staging', 1, ],
+   ['tablet', 'stable', 2, ],
++  ['tearing-control', 'staging', 1, ],
+   ['text-input-unstable-v3', 'private', ],
+   ['viewporter', 'stable', ],
+   ['xdg-activation', 'staging', 1, ],
+diff --git a/src/wayland/meta-wayland-dma-buf.c b/src/wayland/meta-wayland-dma-buf.c
+--- a/src/wayland/meta-wayland-dma-buf.c
++++ b/src/wayland/meta-wayland-dma-buf.c
+@@ -630,11 +630,22 @@ has_modifier (GArray   *modifiers,
+ }
+ 
+ #ifdef HAVE_NATIVE_BACKEND
++static gboolean
++async_supports_modifier (MetaKmsPlane *plane,
++                         uint32_t      drm_format,
++                         uint64_t      drm_modifier)
++{
++  GArray *async_modifiers =
++    meta_kms_plane_get_async_modifiers_for_format (plane, drm_format);
++  return async_modifiers && has_modifier (async_modifiers, drm_modifier);
++}
++
+ static gboolean
+ crtc_supports_modifier (MetaCrtcKms *crtc_kms,
+                         uint32_t     drm_format,
+-                        uint64_t     drm_modifier)
++                        uint64_t     drm_modifier,
++                        gboolean     is_async)
+ {
+   MetaKmsPlane *plane = meta_crtc_kms_get_assigned_primary_plane (crtc_kms);
+   GArray *crtc_modifiers;

systems/x86_64-linux/drivebystation-nix/mutter-tearing.nix

@@ -0,0 +1,59 @@
+{ lib, pkgs, ... }:
+
+let
+  # GNOME/mutter!3797, pinned because the MR is still under development.
+  mutterTearingRevision = "a8d56d423edde9e6d76f6b9cab663d82c65cf1a2";
+  mutterTearingPatch = pkgs.fetchurl {
+    url = "https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3797.diff";
+    hash = "sha256-3up5PsHX+BSQRKb9JS5bnJLPaTGmvV55M18tKkepIng=";
+  };
+in
+{
+  nixpkgs.overlays = [
+    (final: prev: {
+      mutter = prev.mutter.overrideAttrs (old: {
+        pname = "mutter-tearing";
+
+        # nixpkgs leaves Mutter's verbose topics compiled out by default.
+        # This is required for MUTTER_DEBUG=kms to emit the async commit flags.
+        mesonFlags = (old.mesonFlags or [ ]) ++ [ ];
+
+        # The MR currently targets Mutter 51. Apply it to the packaged Mutter
+        # 50 source, then resolve the four small context conflicts separately.
+        prePatch = ''
+          ${old.prePatch or ""}
+
+          set +e
+          patch --batch -p1 --forward < ${mutterTearingPatch}
+          mr_status=$?
+          set -e
+
+          if [ "$mr_status" -ne 0 ]; then
+            reject_count="$(find . -name '*.rej' -type f | wc -l)"
+            if [ "$reject_count" -ne 3 ]; then
+              echo "Unexpected number of Mutter !3797 rejects: $reject_count" >&2
+              exit 1
+            fi
+          fi
+
+          patch --batch -p1 --forward < ${./mutter-50-tearing-compat.patch}
+          find . -name '*.rej' -type f -delete
+        '';
+
+        passthru = (old.passthru or { }) // {
+          tearingMr = 3797;
+          tearingRevision = mutterTearingRevision;
+        };
+      });
+    })
+  ];
+
+  environment.sessionVariables = {
+    # Mutter keeps tearing support behind an experimental runtime switch.
+    MUTTER_DEBUG_EXPERIMENTAL_FEATURES = lib.mkDefault "tearing";
+
+    # Temporarily expose whether async atomic commits reach KMS or fall back
+    # to synchronized presentation. Remove this after collecting the log.
+    # MUTTER_DEBUG = lib.mkDefault "kms";
+  };
+}

systems/x86_64-linux/drivebystation-nix/tigervnc.nix

@@ -0,0 +1,83 @@
+{ config, pkgs, lib, ... }:
+
+let
+  cfg = config.services.tigervnc;
+in
+{
+  options.services.tigervnc = {
+    enable = lib.mkEnableOption "TigerVNC x0vncserver (mirrors :0)";
+    users = lib.mkOption {
+      type = lib.types.attrsOf (lib.types.submodule ({ name, config, ... }: {
+        options = {
+          enableSharing = lib.mkOption { type = lib.types.bool; default = true; };
+          port = lib.mkOption { type = lib.types.int; default = 5901; };
+          localhost = lib.mkOption { type = lib.types.bool; default = false; };
+          #geometry = lib.mkOption { type = lib.types.str; default = ""; };
+        };
+      }));
+      default = { };
+    };
+  };
+
+  config = lib.mkIf cfg.enable {
+    environment.systemPackages = [ pkgs.tigervnc pkgs.xhost pkgs.xauth ];
+
+    systemd.user.services = lib.mapAttrs' (user: opts:
+      let svcName = "tigervnc-x0vncserver-${user}";
+      in {
+        name = svcName;
+        value = lib.mkIf opts.enableSharing {
+          description = "TigerVNC x0vncserver sharing :0 for ${user}";
+          after = [ "graphical-session.target" ];
+          partOf = [ "graphical-session.target" ];
+          wantedBy = [ "graphical-session.target" ];
+
+          path = [ pkgs.tigervnc pkgs.xhost pkgs.xauth pkgs.coreutils ];
+
+          script = let
+            # Build args array to avoid shell escaping hell
+            vncArgs = [
+              "-display :0"
+              "-rfbport ${toString opts.port}"
+              "-rfbauth $HOME/.vnc/passwd"
+              "-AcceptSetDesktopSize=0"
+              "-AlwaysShared"
+            ] #++ lib.optionals (opts.geometry != "") [ "-Geometry ${opts.geometry}" ]
+              ++ lib.optionals opts.localhost [ "-localhost" ];
+          in ''
+            set -euxo pipefail
+
+            # Password check
+            mkdir -p "$HOME/.vnc"
+            if [ ! -r "$HOME/.vnc/passwd" ]; then
+              echo "ERROR: Run: vncpasswd ~/.vnc/passwd" >&2
+### CHANGE THE > in the above line TO A GREATER THAN SIGN! ###
+              exit 1
+            fi
+
+            # X authority
+            xhost +local:
+
+            # Clean x0vncserver args
+            ${pkgs.tigervnc}/bin/x0vncserver ${lib.concatStringsSep " " (map (arg: "${arg}") vncArgs)}
+          '';
+
+          preStop = ''
+            xhost -local:
+            pkill -f "x0vncserver.*${toString opts.port}"
+          '';
+
+          serviceConfig = {
+            Type = "simple";
+            Restart = "always";
+            RestartSec = "5s";
+            RuntimeDirectory = "vnc-${user}";
+          };
+        };
+      }
+    ) cfg.users;
+
+    networking.firewall.allowedTCPPorts =
+      lib.mapAttrsToList (_: opts: opts.port) cfg.users;
+  };
+}

systems/x86_64-linux/drivebystation-nix/video.nix

@@ -0,0 +1,21 @@
+{ config, lib, pkgs, ... }:
+{
+  boot.kernelModules = [
+    "v4l2loopback" # Webcam loopback
+  ];
+  
+  boot.extraModulePackages = [
+    config.boot.kernelPackages.v4l2loopback # Webcam loopback
+  ];
+
+  boot.extraModprobeConfig = ''
+    options v4l2loopback devices=1 video_nr=1 card_label="OBS Cam" exclusive_caps=1
+  '';
+  
+  environment.systemPackages = with pkgs; [
+    # Webcam packages
+    v4l-utils
+    android-tools
+    adb-sync
+  ];
+}

systems/x86_64-linux/drivebystation-nixos-wsl/configuration.nix

@@ -15,7 +15,7 @@
   environment.systemPackages = with pkgs; [
     
   ];
-
+  networking.hostName = "drivebystation-nixos-wsl";
 
   # Enable Experimental Features
   nix.settings.experimental-features = [ "nix-command" "flakes" ];

systems/x86_64-linux/drivebystation-nixos-wsl/default.nix

@@ -0,0 +1,46 @@
+
+  # nixosConfigurations.drivebystation-nixos-wsl = nixpkgs.lib.nixosSystem {
+  #   
+  # };
+  {
+    # Snowfall Lib provides a customized `lib` instance with access to your flake's library
+    # as well as the libraries available from your flake's inputs.
+    lib,
+    # An instance of `pkgs` with your overlays and packages applied is also available.
+    pkgs,
+    # You also have access to your flake's inputs.
+    inputs,
+    # Additional metadata is provided by Snowfall Lib.
+    namespace, # The namespace used for your flake, defaulting to "internal" if not set.
+    system, # The system architecture for this host (eg. `x86_64-linux`).
+    target, # The Snowfall Lib target for this system (eg. `x86_64-iso`).
+    format, # A normalized name for the system target (eg. `iso`).
+    virtual, # A boolean to determine whether this system is a virtual target using nixos-generators.
+    systems, # An attribute map of your defined hosts.
+
+    # All other arguments come from the system system.
+    config,
+    ...
+}:
+{
+  inherit system;
+    modules = [
+      nixos-wsl.nixosModules.default
+      ./configuration.nix
+      {
+        system.stateVersion = "24.05";
+        wsl.enable = true;
+        nix.settings.experimental-features = [ "nix-command" "flakes" ];
+        environment.systemPackages = [
+
+        ]
+        ++ installedPackages.mkPackages.packages;
+        programs.nix-ld = {
+          enable = true;
+          package = pkgs.nix-ld-rs;
+        };
+      }
+    ];
+    specialArgs = { inherit inputs; };
+    # Your configuration.
+}

systems/x86_64-linux/th0nkpad-nixos/configuration.nix

@@ -44,29 +44,25 @@
     LC_TELEPHONE = "nl_NL.UTF-8";
     LC_TIME = "nl_NL.UTF-8";
   };
-
-  # Enable the X11 windowing system.
+  # Enable the X11 windowing system
   services.xserver.enable = true;
-
-  # Enable the GNOME Desktop Environment.
+  # Enable the GNOME Desktop Environment
   services.xserver.displayManager.gdm.enable = true;
   services.xserver.desktopManager.gnome.enable = true;
-
   # Configure keymap in X11
   services.xserver.xkb = {
     layout = "us";
     variant = "intl";
   };
-
   # Configure console keymap
   console.keyMap = "us-acentos";
-
-  # Enable CUPS to print documents.
+  # Enable CUPS to print documents
   services.printing.enable = true;
-
-  # Enable sound with pipewire.
+  # Enable sound with pulse (pipewire)
   hardware.pulseaudio.enable = false;
+  # Enable realtimekit (pulse requirement)
   security.rtkit.enable = true;
+  # Configure pipewire service
   services.pipewire = {
     enable = true;
     alsa.enable = true;
@@ -106,5 +102,4 @@
   # Before changing this value read the documentation for this option
   # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
   system.stateVersion = "24.05"; # Did you read the comment?
-
 }

systems/x86_64-linux/th0nkpad-nixos/default.nix

@@ -0,0 +1,113 @@
+# nixosConfigurations.th0nkpad-nixos = nixpkgs.lib.nixosSystem {
+
+{
+  # Snowfall Lib provides a customized `lib` instance with access to your flake's library
+  # as well as the libraries available from your flake's inputs.
+  lib, 
+  # An instance of `pkgs` with your overlays and packages applied is also available.
+  pkgs, 
+  # You also have access to your flake's inputs.
+  inputs, 
+  # Additional metadata is provided by Snowfall Lib.
+  # The namespace used for your flake, defaulting to "internal" if not set.
+  namespace, 
+  # The system architecture for this host (eg. `x86_64-linux`).
+  system, 
+  # The Snowfall Lib target for this system (eg. `x86_64-iso`).
+  target, 
+  # A normalized name for the system target (eg. `iso`).
+  format, 
+  # A boolean to determine whether this system is a virtual target using nixos-generators.
+  virtual, 
+  # An attribute map of your defined hosts.
+  systems, 
+  # All other arguments come from the system system.
+  config
+, ...
+}:
+let
+  inherit pkgs;
+  installedPackages = lib.my-namespace.mkPackages pkgs;
+in
+{
+  # inherit system;
+  imports = [
+    ./configuration.nix
+  ];
+  config = {
+      system.stateVersion = "24.05";
+      nix.settings.experimental-features = [ "nix-command" "flakes" ];
+      # Define a user account. Don't forget to set a password with ‘passwd’.
+      users.users.andreas = {
+        isNormalUser = true;
+        description = "Andreas";
+        extraGroups = [ "networkmanager" "wheel" ];
+        packages = with pkgs; [
+          flatpak
+          gnome-software
+          soundwireserver
+          vscode
+          spotify
+	        appimage-run
+          inputs.game-of-life.packages.x86_64-linux.default
+          inputs.nixos-cosmic
+          #  thunderbird
+        ];
+      };
+      # lib.my-namespace.home.stream-tools.enable = true;
+
+
+      # Open ports in the firewall.
+      networking.firewall.allowedTCPPorts = [
+        59010 #SoundWireServer
+        3389 #RDP
+      ];
+      networking.firewall.allowedUDPPorts = [
+        59010 #SoundWireServer
+        3389 #RDP
+      ];
+      # Or disable the firewall altogether.
+      # networking.firewall.enable = false;
+
+      # Install firefox.
+      programs.firefox.enable = true;
+
+      # Set up system Packages
+      environment.systemPackages = with pkgs; [
+        git
+        #  vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+        #  wget
+      ]
+      ++  installedPackages.packages;
+      programs.nix-ld = {
+        enable = true;
+        package = pkgs.nix-ld-rs;
+      };
+      services.flatpak.enable = true;
+      systemd.services.flatpak-repo = {
+        wantedBy = [ "multi-user.target" ];
+        path = [ pkgs.flatpak ];
+        script = ''
+          flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
+        '';
+      };
+
+      services.openssh = {
+        enable = true;
+        passwordAuthentication = true;
+      };
+
+
+      # services.xrdp.enable = true;
+      # services.xrdp.defaultWindowManager = "${pkgs.gnome-session}/bin/gnome-session";
+      # services.xrdp.openFirewall = true;
+
+
+      # Disable the GNOME3/GDM auto-suspend feature that cannot be disabled in GUI!
+      # If no user is logged in, the machine will power down after 20 minutes.
+      systemd.targets.sleep.enable = false;
+      systemd.targets.suspend.enable = false;
+      systemd.targets.hibernate.enable = false;
+      systemd.targets.hybrid-sleep.enable = false;
+    };
+  }