add better wallpaper engine gui

.gitignore

@@ -0,0 +1 @@
+.vscode/settings.json

.sops.yaml

@@ -3,9 +3,11 @@ keys:
     - &andreas age19j24x89dfh4f7v58c8k64yupqas4f7qkkyper7yj9dd7vqwvvq0qkyvhxk # generated using cli
   - hosts:
     - &th0nkpad-nixos age1ma8x6wugvc40mkst33mejq0m6r44jk6zwjjun3znyer5nztgn9vs0nwjx4 # derived from ssh host key
+    - &drivebystation-nix age1s5qwsuc3e4m3c4w5hl6tyja70w273gr60j9j9dcpc6mz69lemg3qpwud3h #derived from ssh host key
 creation_rules:
  - path_regex: secrets.yaml$
    key_groups:
    - age:
      - *andreas
      - *th0nkpad-nixos
+     - *drivebystation-nix

AGENTS.md

@@ -0,0 +1,102 @@
+## CODE GENERATION INSTRUCTIONS
+
+You are tasked with integrating patches into my kernel to make the tearing protocol work on Wayland with my intel B580. 
+
+## THINGS TO DO:
+
+Plan out how you're going to do the following. I will inspect your plan and then authorize it.
+
+- Custom build this MR: https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3797
+
+- Fix KDE tearing on Intel Graphics using kernel patches for libdrm. Use these resources to research:
+    - https://bugs.kde.org/show_bug.cgi?id=520549
+    - https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/8597#note_3567675
+    - https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/13834 (this one has patches that supposedly fix the problem.)
+
+
+# Plan here:
+
+- [ ] 1. Record the current package and kernel baselines.
+  - Evaluate the locked versions of Mutter, GNOME Shell, libdrm, and the selected CachyOS kernel.
+  - Confirm that the Intel Arc B580 (`8086:e20b`) is using the `xe` driver.
+  - Save the current working kernel and NixOS generation as the rollback baseline.
+
+- [ ] 2. Pin all experimental upstream sources.
+  - Pin Mutter merge request !3797 to a specific commit instead of following its branch.
+  - Record the MR base commit and verify whether it is compatible with the Mutter version in the locked nixpkgs input.
+  - Identify the exact revisions of the Intel async-flip and `IN_FORMATS_ASYNC` kernel patches referenced by the i915 and Xe work items.
+  - Use fixed-output hashes for every fetched patch or source archive.
+
+- [ ] 3. Determine which Intel DRM patches are still required.
+  - Inspect the selected CachyOS kernel source for patches that have already been merged or backported.
+  - Select only the missing patches needed to expose async-capable formats and prevent unchanged or disabled planes from incorrectly rejecting an async atomic commit.
+  - Confirm that the selected changes affect the Intel display code shared by `xe` and `i915`, and therefore apply to the B580 even when the original report is filed under i915.
+  - Document the required patch order and each patch's upstream URL and revision.
+
+- [ ] 4. Add a dedicated, reversible Wayland-tearing overlay or module.
+  - Keep the experimental Mutter and kernel overrides together in a new, clearly named repository file.
+  - Scope the override to `drivebystation-nix` where practical.
+  - Provide a single enable switch or isolated import so the experiment can be disabled without editing generated hardware configuration.
+  - Preserve all unrelated existing worktree changes.
+
+- [ ] 5. Override Mutter with merge request !3797.
+  - Prefer applying the pinned MR commits to the nixpkgs Mutter derivation so nixpkgs build flags and dependency wiring are retained.
+  - If the patch series is incompatible, use the pinned MR source only after confirming its Mutter ABI matches the installed GNOME Shell.
+  - Verify that libdrm is at least version 2.4.120.
+  - Ensure GNOME Shell and the display-manager session reference the overridden Mutter rather than merely installing it alongside the stock package.
+  - Enable the experimental feature with `MUTTER_DEBUG_EXPERIMENTAL_FEATURES=tearing` in the session environment.
+
+- [ ] 6. Override the CachyOS kernel with the selected Intel DRM patches.
+  - Extend the existing `pkgs.cachyosKernels.linuxPackages-cachyos-latest` kernel derivation rather than replacing it with an unrelated kernel package set.
+  - Apply the pinned patches in their upstream dependency order.
+  - Verify that every patch applies cleanly to the exact CachyOS kernel source.
+  - Keep `boot.extraModulePackages` tied to the patched kernel package set so `r8125` and `v4l2loopback` are rebuilt against the correct kernel.
+  - Do not modify the generated `hardware-configuration.nix` beyond any unavoidable existing kernel selection; place the override in a maintained host module.
+
+- [ ] 7. Validate the Nix expressions without activating the system.
+  - Run formatting and syntax checks on every changed Nix file.
+  - Evaluate the complete `drivebystation-nix` configuration.
+  - Run `nix flake check` and resolve evaluation failures attributable to these changes.
+  - Confirm that all sources are pinned and reproducible and that no mutable branch names remain.
+
+- [ ] 8. Build each risky component independently.
+  - Build the overridden Mutter derivation.
+  - Build the patched kernel derivation.
+  - Build the matching `r8125` and `v4l2loopback` modules.
+  - Inspect the build logs for rejected patches, warnings related to async flips, and ABI mismatches.
+
+- [ ] 9. Build the complete NixOS system before switching.
+  - Build the `drivebystation-nix` toplevel without activating it.
+  - Verify that the closure contains the pinned patched Mutter and patched CachyOS kernel.
+  - Confirm that a previous known-good boot generation remains available.
+
+- [ ] 10. Activate the result safely.
+  - Use `nixos-rebuild boot` first so the new system is selected only after reboot.
+  - Reboot into the patched generation and verify the running kernel version and `xe` driver binding.
+  - If the display fails or the system is unstable, boot the previous generation and disable the experimental module.
+
+- [ ] 11. Verify the kernel DRM capabilities.
+  - Run `drm_info` and confirm atomic async-page-flip capability is reported.
+  - Confirm `IN_FORMATS_ASYNC` is populated for supported primary planes.
+  - Confirm its absence on the cursor plane is handled as expected rather than causing the entire commit to fail.
+  - Capture a DRM debug log while submitting tearing-enabled fullscreen frames.
+
+- [ ] 12. Test KDE Plasma tearing.
+  - Enable Plasma's "Allow in fullscreen windows" tearing setting.
+  - Run a fullscreen tearing-aware game or test client with frame rate above the monitor refresh rate.
+  - Confirm that KWin's async atomic commits no longer fail with `-EINVAL`.
+  - Confirm that the previous `cursor A: async flip not supported` and `plane 2A: async flip not supported` errors no longer occur for disabled or unchanged planes.
+  - Check cursor movement, fullscreen entry and exit, direct scanout, VRR enabled and disabled, and all connected monitors.
+
+- [ ] 13. Test GNOME Mutter tearing.
+  - Start a GNOME Wayland session and confirm the tearing-control protocol is advertised.
+  - Run `weston-simple-egl -v -f -t` or an equivalent tearing-aware client.
+  - Confirm that requested asynchronous flips are accepted and visibly tear when the frame rate exceeds the refresh rate.
+  - Confirm unsupported async commits fall back to synchronized presentation without breaking the session.
+  - Test cursor movement, fullscreen transitions, VRR, multiple monitors, and suspend/resume.
+
+- [ ] 14. Document results and removal criteria.
+  - Record the tested hardware, kernel, Mutter, GNOME Shell, Plasma, and libdrm versions.
+  - Record the exact patches used and the outcome of both compositor tests.
+  - Document how to disable the overrides and roll back to the previous generation.
+  - Note which upstream merge or kernel release will allow each local override to be removed.

README.md

@@ -0,0 +1,61 @@
+# NixOS configuration
+
+The default package set is NixOS 26.05. Home Manager and AAGL use their
+matching 26.05 release branches. `drivebystation-nix` uses the standard
+`pkgs.linuxPackages` kernel from stable, including matching external modules.
+
+## Packages from unstable
+
+`inputs.nixpkgs-unstable` is a separate package set, pinned in `flake.lock`.
+Select individual applications explicitly, as with Trilium and JetBrains
+Toolbox in the desktop host:
+
+```nix
+unstablePkgs.trilium-desktop
+```
+
+The host defines `unstablePkgs` by importing the separate input with
+`allowUnfree = true`. Use `pkgs.<name>` for stable packages. Unstable
+applications retain their own dependencies; the system package set stays on
+stable.
+
+Update the stable inputs and the application exceptions independently:
+
+```sh
+nix flake update nixpkgs home-manager aagl
+nix flake update nixpkgs-unstable
+```
+
+The existing Mutter tearing override remains experimental. Its compatibility
+and B580 graphics behavior require testing when changing the desktop stack.
+
+## Validate and boot
+
+```sh
+nix build .#nixosConfigurations.drivebystation-nix.config.system.build.toplevel --no-link
+sudo nixos-rebuild boot --flake .#drivebystation-nix
+```
+
+Only run the boot command after the build succeeds. Keep the previous working
+generation available in the boot menu, then test networking, graphics, and
+the webcam loopback after reboot. Git restores configuration sources; booting
+the previous generation restores the previous system closure.
+
+Whole-flake checks currently also evaluate an unfinished WSL host referencing
+the disabled `nixos-wsl` input. Validate the desktop target directly until that
+separate host configuration is repaired.
+
+## Migration validation (2026-10-17)
+
+The complete `drivebystation-nix` system built successfully without activation.
+Its closure contains Linux 6.18.56, patched Mutter 50.5, GNOME Shell 50.5,
+libdrm 2.4.133, r8125 9.016.01, and v4l2loopback 0.15.3. The explicit unstable
+applications are Trilium 0.106.0 and JetBrains Toolbox 3.8.1.88030.
+
+Nix syntax and Git whitespace checks pass. `nix flake check --no-build` stops
+at the existing WSL input error described above. The edited Nix files retain
+the repository's existing formatting; `nixpkgs-fmt --check` reports formatting
+differences, including on the original flake before migration.
+
+Boot, networking, B580 graphics, and tearing behavior still require runtime
+testing. The migration does not add Intel tearing kernel patches.

flake.lock

@@ -1,17 +1,169 @@
 {
   "nodes": {
-    "flake-compat": {
+    "Catch2": {
       "flake": false,
       "locked": {
-        "lastModified": 1717312683,
+        "lastModified": 1759222471,
-        "narHash": "sha256-FrlieJH50AuvagamEvWMIE6D2OAnERuDboFDYAED/dE=",
+        "narHash": "sha256-7Dx7PhtRwkbo8vHF57sAns2fQZ442D3cMyCt25RvzJc=",
+        "owner": "catchorg",
+        "repo": "Catch2",
+        "rev": "b3fb4b9feafcd8d91c5cb510a4775143fdbef02f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "catchorg",
+        "repo": "Catch2",
+        "rev": "b3fb4b9feafcd8d91c5cb510a4775143fdbef02f",
+        "type": "github"
+      }
+    },
+    "MimeTypes": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1577040615,
+        "narHash": "sha256-biRcxbpRVnD3+VVo0fNrNGeAi1P7pSzkGKHZrTtGp7Q=",
+        "owner": "lasselukkari",
+        "repo": "MimeTypes",
+        "rev": "8990d6a796bd9904ec3d41e5c150a1ffb48fe32e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "lasselukkari",
+        "repo": "MimeTypes",
+        "rev": "8990d6a796bd9904ec3d41e5c150a1ffb48fe32e",
+        "type": "github"
+      }
+    },
+    "SPIRV-Cross-WallpaperEngine": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1745093314,
+        "narHash": "sha256-ou66paGlu3KXf8LL8zfTiE8wOf0nRBocDs1QvfRVs+k=",
+        "owner": "Almamu",
+        "repo": "SPIRV-Cross-WallpaperEngine",
+        "rev": "ad4d02220b01c1800e5a4e6671d6d8ca8ab07783",
+        "type": "github"
+      },
+      "original": {
+        "owner": "Almamu",
+        "repo": "SPIRV-Cross-WallpaperEngine",
+        "rev": "ad4d02220b01c1800e5a4e6671d6d8ca8ab07783",
+        "type": "github"
+      }
+    },
+    "aagl": {
+      "inputs": {
+        "flake-compat": "flake-compat",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "rust-overlay": "rust-overlay"
+      },
+      "locked": {
+        "lastModified": 1789138195,
+        "narHash": "sha256-cvK9QXAzcgYYg6WsMSfzSE78QyCbNoRMF25GIZ0pz1s=",
+        "owner": "ezKEa",
+        "repo": "aagl-gtk-on-nix",
+        "rev": "decd5655d94eec05b6d5beacb9a652f8ca95344e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "ezKEa",
+        "ref": "release-26.05",
+        "repo": "aagl-gtk-on-nix",
+        "type": "github"
+      }
+    },
+    "argparse": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1737934041,
+        "narHash": "sha256-gRLn4juxwde7ugvT/p4lx9ayDTm7o32NKaE/SEbnLHI=",
+        "owner": "p-ranav",
+        "repo": "argparse",
+        "rev": "d924b84eba1f0f0adf38b20b7b4829f6f65b6570",
+        "type": "github"
+      },
+      "original": {
+        "owner": "p-ranav",
+        "repo": "argparse",
+        "rev": "d924b84eba1f0f0adf38b20b7b4829f6f65b6570",
+        "type": "github"
+      }
+    },
+    "bun2nix": {
+      "inputs": {
+        "flake-parts": "flake-parts",
+        "import-tree": "import-tree",
+        "nixpkgs": [
+          "linux-wallpaper-engine",
+          "nixpkgs"
+        ],
+        "systems": "systems_2",
+        "treefmt-nix": "treefmt-nix"
+      },
+      "locked": {
+        "lastModified": 1770895533,
+        "narHash": "sha256-v3QaK9ugy9bN9RXDnjw0i2OifKmz2NnKM82agtqm/UY=",
         "owner": "nix-community",
-        "repo": "flake-compat",
+        "repo": "bun2nix",
-        "rev": "38fd3954cf65ce6faf3d0d45cd26059e059f07ea",
+        "rev": "c843f477b15f51151f8c6bcc886954699440a6e1",
         "type": "github"
       },
       "original": {
         "owner": "nix-community",
+        "repo": "bun2nix",
+        "type": "github"
+      }
+    },
+    "codex-desktop": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1791562553,
+        "narHash": "sha256-uyLpIxJv9lqy1pgGUd0C/RZvqWyFqbwR0Tq7E+UX0VM=",
+        "owner": "ilysenko",
+        "repo": "codex-desktop-linux",
+        "rev": "443cb5d52ed781cac6cc7083780abb058cf93678",
+        "type": "github"
+      },
+      "original": {
+        "owner": "ilysenko",
+        "repo": "codex-desktop-linux",
+        "type": "github"
+      }
+    },
+    "crane": {
+      "locked": {
+        "lastModified": 1781825982,
+        "narHash": "sha256-SlXKwIRIhrOSAcTjCB3ftPLzJWZStQIPS7J1FlZPnKk=",
+        "owner": "ipetkov",
+        "repo": "crane",
+        "rev": "469fd08d0bcf6926321fa973c6777fbc87785dd7",
+        "type": "github"
+      },
+      "original": {
+        "owner": "ipetkov",
+        "repo": "crane",
+        "type": "github"
+      }
+    },
+    "flake-compat": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1767039857,
+        "narHash": "sha256-vNpUSpF5Nuw8xvDLj2KCwwksIbjua2LZCqhV1LNRDns=",
+        "owner": "edolstra",
+        "repo": "flake-compat",
+        "rev": "5edf11c44bc78a0d334f6334cdaf7d60d732daab",
+        "type": "github"
+      },
+      "original": {
+        "owner": "edolstra",
         "repo": "flake-compat",
         "type": "github"
       }
@@ -19,15 +171,15 @@
     "flake-compat_2": {
       "flake": false,
       "locked": {
-        "lastModified": 1696426674,
+        "lastModified": 1767039857,
-        "narHash": "sha256-kvjfFW7WAETZlt09AgDn1MrtKzP7t90Vf7vypd3OL1U=",
+        "narHash": "sha256-vNpUSpF5Nuw8xvDLj2KCwwksIbjua2LZCqhV1LNRDns=",
-        "owner": "edolstra",
+        "owner": "NixOS",
         "repo": "flake-compat",
-        "rev": "0f9255e01c2351cc7d116c072cb317785dd33b33",
+        "rev": "5edf11c44bc78a0d334f6334cdaf7d60d732daab",
         "type": "github"
       },
       "original": {
-        "owner": "edolstra",
+        "owner": "NixOS",
         "repo": "flake-compat",
         "type": "github"
       }
@@ -48,16 +200,34 @@
         "type": "github"
       }
     },
+    "flake-parts": {
+      "inputs": {
+        "nixpkgs-lib": "nixpkgs-lib"
+      },
+      "locked": {
+        "lastModified": 1769996383,
+        "narHash": "sha256-AnYjnFWgS49RlqX7LrC4uA+sCCDBj0Ry/WOJ5XWAsa0=",
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "rev": "57928607ea566b5db3ad13af0e57e921e6b12381",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "type": "github"
+      }
+    },
     "flake-utils": {
       "inputs": {
         "systems": "systems"
       },
       "locked": {
-        "lastModified": 1726560853,
+        "lastModified": 1731533236,
-        "narHash": "sha256-X6rJYSESBVr3hBoH0WbKE5KvhPU5bloyZ2L4K60/fPQ=",
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
         "owner": "numtide",
         "repo": "flake-utils",
-        "rev": "c1dfcf08411b08f6b8615f7d8971a2bfa81d5e8a",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
         "type": "github"
       },
       "original": {
@@ -68,7 +238,7 @@
     },
     "flake-utils-plus": {
       "inputs": {
-        "flake-utils": "flake-utils_2"
+        "flake-utils": "flake-utils_3"
       },
       "locked": {
         "lastModified": 1715533576,
@@ -87,7 +257,25 @@
     },
     "flake-utils_2": {
       "inputs": {
-        "systems": "systems_2"
+        "systems": "systems_3"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "flake-utils_3": {
+      "inputs": {
+        "systems": "systems_5"
       },
       "locked": {
         "lastModified": 1694529238,
@@ -103,21 +291,42 @@
         "type": "github"
       }
     },
-    "game-of-life": {
+    "gitignore": {
       "inputs": {
-        "nixpkgs": "nixpkgs"
+        "nixpkgs": [
+          "lanzaboote",
+          "pre-commit",
+          "nixpkgs"
+        ]
       },
       "locked": {
-        "lastModified": 1728511087,
+        "lastModified": 1709087332,
-        "narHash": "sha256-CvO74jwMjUUPySy0QCt7sPImbxKlhWcSAet93Fkt6iU=",
+        "narHash": "sha256-HG2cCnktfHsKV0s4XW83gU3F57gaTljL9KNSuG6bnQs=",
-        "owner": "local-interloper",
+        "owner": "hercules-ci",
-        "repo": "game-of-life",
+        "repo": "gitignore.nix",
-        "rev": "c39d37e394f5da79a6a7d198e1d7e505aa5298a7",
+        "rev": "637db329424fd7e46cf4185293b9cc8c88c95394",
         "type": "github"
       },
       "original": {
-        "owner": "local-interloper",
+        "owner": "hercules-ci",
-        "repo": "game-of-life",
+        "repo": "gitignore.nix",
+        "type": "github"
+      }
+    },
+    "glslang-WallpaperEngine": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1770589476,
+        "narHash": "sha256-auhYcTWdSERwujUqwfDbF61tncO18dwar3mMQ09VW1w=",
+        "owner": "Almamu",
+        "repo": "glslang-WallpaperEngine",
+        "rev": "b775500a153f5ceb0e4b6f366b79c4c57521bb62",
+        "type": "github"
+      },
+      "original": {
+        "owner": "Almamu",
+        "repo": "glslang-WallpaperEngine",
+        "rev": "b775500a153f5ceb0e4b6f366b79c4c57521bb62",
         "type": "github"
       }
     },
@@ -128,11 +337,33 @@
         ]
       },
       "locked": {
-        "lastModified": 1733484277,
+        "lastModified": 1791938526,
-        "narHash": "sha256-i5ay20XsvpW91N4URET/nOc0VQWOAd4c4vbqYtcH8Rc=",
+        "narHash": "sha256-yNYK2pdk3bCtJrpblrNYA6hZKdybWUeyTtx74+OEJFo=",
         "owner": "nix-community",
         "repo": "home-manager",
-        "rev": "d00c6f6d0ad16d598bf7e2956f52c1d9d5de3c3a",
+        "rev": "32904dfe1cf86039f3c8c9f41f94e1cfd76dbb34",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "ref": "release-26.05",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
+    "home-manager_2": {
+      "inputs": {
+        "nixpkgs": [
+          "zen-browser",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1788229478,
+        "narHash": "sha256-G0F2rFORVcFkEvVdE/qWQTnYekIc77YP5/vRF9nZlxU=",
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "rev": "1dc2d1f720ab17fc7981e087346bf54b26d284b1",
         "type": "github"
       },
       "original": {
@@ -141,119 +372,226 @@
         "type": "github"
       }
     },
-    "nixos-cosmic": {
+    "import-tree": {
-      "inputs": {
-        "flake-compat": "flake-compat",
-        "nixpkgs": "nixpkgs_2",
-        "nixpkgs-stable": "nixpkgs-stable",
-        "rust-overlay": "rust-overlay"
-      },
       "locked": {
-        "lastModified": 1733558619,
+        "lastModified": 1763762820,
-        "narHash": "sha256-+hpXjj67bWfr8Z4JP32CPqvoqO5hkTNyRZLA5SB6Zmc=",
+        "narHash": "sha256-ZvYKbFib3AEwiNMLsejb/CWs/OL/srFQ8AogkebEPF0=",
-        "owner": "lilyinstarlight",
+        "owner": "vic",
-        "repo": "nixos-cosmic",
+        "repo": "import-tree",
-        "rev": "313f9b0d8cb2ec8bec0f4d5170c3fda41d49f58c",
+        "rev": "3c23749d8013ec6daa1d7255057590e9ca726646",
         "type": "github"
       },
       "original": {
-        "owner": "lilyinstarlight",
+        "owner": "vic",
-        "repo": "nixos-cosmic",
+        "repo": "import-tree",
         "type": "github"
       }
     },
-    "nixos-wsl": {
+    "json": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1743872075,
+        "narHash": "sha256-eSqi4dhFrUvjYN+jD8nGqj1FbzGA6I2+eSqzdCGOLH8=",
+        "owner": "nlohmann",
+        "repo": "json",
+        "rev": "4424a0fcc1c7fa640b5c87d26776d99150dacd10",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nlohmann",
+        "repo": "json",
+        "rev": "4424a0fcc1c7fa640b5c87d26776d99150dacd10",
+        "type": "github"
+      }
+    },
+    "kissfft": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1739194969,
+        "narHash": "sha256-DywClnx67EE+CnduSuZIIfaAKbBg1ebQ+JgwIpDsnGQ=",
+        "owner": "mborgerding",
+        "repo": "kissfft",
+        "rev": "febd4caeed32e33ad8b2e0bb5ea77542c40f18ec",
+        "type": "github"
+      },
+      "original": {
+        "owner": "mborgerding",
+        "repo": "kissfft",
+        "rev": "febd4caeed32e33ad8b2e0bb5ea77542c40f18ec",
+        "type": "github"
+      }
+    },
+    "lanzaboote": {
       "inputs": {
-        "flake-compat": "flake-compat_2",
+        "crane": "crane",
-        "flake-utils": "flake-utils",
+        "nixpkgs": [
-        "nixpkgs": "nixpkgs_3"
+          "nixpkgs"
+        ],
+        "pre-commit": "pre-commit",
+        "rust-overlay": "rust-overlay_2"
       },
       "locked": {
-        "lastModified": 1733516684,
+        "lastModified": 1782141370,
-        "narHash": "sha256-yz3mZyTnPlxZW2f51kJyfofDsBeX7WxAPvTXZtr2lW4=",
+        "narHash": "sha256-hqijVSEETttmo8Okql9/LG0Ua34hdciKW1a5zzlj8mU=",
         "owner": "nix-community",
-        "repo": "NixOS-WSL",
+        "repo": "lanzaboote",
-        "rev": "dd20ebde771edbdececade73dbb8791ff987d0db",
+        "rev": "7c9a54a7f87b4539ddbd8bda09a8a5f5f9361aa9",
         "type": "github"
       },
       "original": {
         "owner": "nix-community",
-        "ref": "main",
+        "ref": "v1.1.0",
-        "repo": "NixOS-WSL",
+        "repo": "lanzaboote",
+        "type": "github"
+      }
+    },
+    "linux-wallpaper-engine": {
+      "inputs": {
+        "bun2nix": "bun2nix",
+        "flake-utils": "flake-utils_2",
+        "nixpkgs": "nixpkgs"
+      },
+      "locked": {
+        "lastModified": 1792046320,
+        "narHash": "sha256-AM22WLmtSfXw/AKKTEVBpSTZ+ksc8aWTwLyu/xyTRSs=",
+        "owner": "jagrat7",
+        "repo": "linux-wallpaper-engine",
+        "rev": "f52102134ea4205a422eb93cc5550e8568a8d769",
+        "type": "github"
+      },
+      "original": {
+        "owner": "jagrat7",
+        "repo": "linux-wallpaper-engine",
+        "type": "github"
+      }
+    },
+    "millennium": {
+      "inputs": {
+        "millennium-src": "millennium-src",
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "nixpkgs-bun": "nixpkgs-bun"
+      },
+      "locked": {
+        "dir": "packages/nix",
+        "lastModified": 1792022604,
+        "narHash": "sha256-xyl3KTB+j4W3dAxQVSolNJCQZOasDnCLB3Dr14adBmU=",
+        "owner": "SteamClientHomebrew",
+        "repo": "Millennium",
+        "rev": "22af2f453777a925fb398a3dab60a407e66aa83f",
+        "type": "github"
+      },
+      "original": {
+        "dir": "packages/nix",
+        "owner": "SteamClientHomebrew",
+        "repo": "Millennium",
+        "type": "github"
+      }
+    },
+    "millennium-src": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1791947497,
+        "narHash": "sha256-sNpoyJ+IjrTiDGfX2QiKVg4jkrJR7n9PdBeOYJSS4n8=",
+        "owner": "SteamClientHomebrew",
+        "repo": "Millennium",
+        "rev": "401d532543a0fbff469653ccba802bdd7e45f861",
+        "type": "github"
+      },
+      "original": {
+        "owner": "SteamClientHomebrew",
+        "repo": "Millennium",
+        "rev": "401d532543a0fbff469653ccba802bdd7e45f861",
         "type": "github"
       }
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1717179513,
+        "lastModified": 1772624091,
-        "narHash": "sha256-vboIEwIQojofItm2xGCdZCzW96U85l9nDW3ifMuAIdM=",
+        "narHash": "sha256-QKyJ0QGWBn6r0invrMAK8dmJoBYWoOWy7lN+UHzW1jc=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "63dacb46bf939521bdc93981b4cbb7ecb58427a0",
+        "rev": "80bdc1e5ce51f56b19791b52b2901187931f5353",
         "type": "github"
       },
       "original": {
         "owner": "NixOS",
-        "ref": "24.05",
+        "ref": "nixos-unstable",
         "repo": "nixpkgs",
         "type": "github"
       }
     },
-    "nixpkgs-stable": {
+    "nixpkgs-bun": {
       "locked": {
-        "lastModified": 1733412085,
+        "lastModified": 1790822859,
-        "narHash": "sha256-FillH0qdWDt/nlO6ED7h4cmN+G9uXwGjwmCnHs0QVYM=",
+        "narHash": "sha256-69xHQhAeMAD2wDXO7T2pcOZIF9Sga2W+JkmY2a11Ops=",
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "c59305bab2065cfecc4944690d9eedbb56f3a9fa",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "c59305bab2065cfecc4944690d9eedbb56f3a9fa",
+        "type": "github"
+      }
+    },
+    "nixpkgs-lib": {
+      "locked": {
+        "lastModified": 1769909678,
+        "narHash": "sha256-cBEymOf4/o3FD5AZnzC3J9hLbiZ+QDT/KDuyHXVJOpM=",
+        "owner": "nix-community",
+        "repo": "nixpkgs.lib",
+        "rev": "72716169fe93074c333e8d0173151350670b824c",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "nixpkgs.lib",
+        "type": "github"
+      }
+    },
+    "nixpkgs-unstable": {
+      "locked": {
+        "lastModified": 1791956154,
+        "narHash": "sha256-jBYGPi4udQ9uo4KQp9m2J0546nJVQitG15gvZSaVVAs=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "4dc2fc4e62dbf62b84132fe526356fbac7b03541",
+        "rev": "55bfb4d7437bd4e09ab7cba58a43bd68eb310044",
         "type": "github"
       },
       "original": {
         "owner": "NixOS",
-        "ref": "nixos-24.11",
+        "ref": "nixos-unstable",
         "repo": "nixpkgs",
         "type": "github"
       }
     },
     "nixpkgs_2": {
       "locked": {
-        "lastModified": 1733392399,
+        "lastModified": 1791883866,
-        "narHash": "sha256-kEsTJTUQfQFIJOcLYFt/RvNxIK653ZkTBIs4DG+cBns=",
+        "narHash": "sha256-yvkDdToRZ4IgPc9tSBzzCYJvTLf8n5eE3rgUkpCuD5A=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "d0797a04b81caeae77bcff10a9dde78bc17f5661",
+        "rev": "a033e66ab94a6bedf2c3d58d93a36319d3cbbbaf",
         "type": "github"
       },
       "original": {
         "owner": "NixOS",
-        "ref": "nixos-unstable",
+        "ref": "nixos-26.05",
         "repo": "nixpkgs",
         "type": "github"
       }
     },
     "nixpkgs_3": {
       "locked": {
-        "lastModified": 1729973466,
+        "lastModified": 1789286504,
-        "narHash": "sha256-knnVBGfTCZlQgxY1SgH0vn2OyehH9ykfF8geZgS95bk=",
+        "narHash": "sha256-eiEK7cKZORNEvX0GeF3RtNEF/JXhgf2RqSp3230q13E=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "cd3e8833d70618c4eea8df06f95b364b016d4950",
+        "rev": "ef34387ddd751e1ab8857adf4676492d32eb24ec",
-        "type": "github"
-      },
-      "original": {
-        "owner": "NixOS",
-        "ref": "nixos-24.05",
-        "repo": "nixpkgs",
-        "type": "github"
-      }
-    },
-    "nixpkgs_4": {
-      "locked": {
-        "lastModified": 1733392399,
-        "narHash": "sha256-kEsTJTUQfQFIJOcLYFt/RvNxIK653ZkTBIs4DG+cBns=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "d0797a04b81caeae77bcff10a9dde78bc17f5661",
         "type": "github"
       },
       "original": {
@@ -263,47 +601,76 @@
         "type": "github"
       }
     },
-    "nixpkgs_5": {
+    "pre-commit": {
+      "inputs": {
+        "flake-compat": "flake-compat_2",
+        "gitignore": "gitignore",
+        "nixpkgs": [
+          "lanzaboote",
+          "nixpkgs"
+        ]
+      },
       "locked": {
-        "lastModified": 1727348695,
+        "lastModified": 1781733627,
-        "narHash": "sha256-J+PeFKSDV+pHL7ukkfpVzCOO7mBSrrpJ3svwBFABbhI=",
+        "narHash": "sha256-U3yTuGBnmXvXoQI3qkpfEDsn9RovQPAjN7ndRco+3u0=",
-        "owner": "nixos",
+        "owner": "cachix",
-        "repo": "nixpkgs",
+        "repo": "pre-commit-hooks.nix",
-        "rev": "1925c603f17fc89f4c8f6bf6f631a802ad85d784",
+        "rev": "3bbec39bc90eadfa031e6f3b77272f3f60803e39",
         "type": "github"
       },
       "original": {
-        "owner": "nixos",
+        "owner": "cachix",
-        "ref": "nixos-unstable",
+        "repo": "pre-commit-hooks.nix",
-        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "quickjs": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1770976497,
+        "narHash": "sha256-odQznZ/Xc6IGh6JPM1RyyEn9HL/+/AFR99XcF+WHJDc=",
+        "owner": "quickjs-ng",
+        "repo": "quickjs",
+        "rev": "72ba50f63ee31202f8c18b8d07ab1e1c3486ee6f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "quickjs-ng",
+        "repo": "quickjs",
+        "rev": "72ba50f63ee31202f8c18b8d07ab1e1c3486ee6f",
         "type": "github"
       }
     },
     "root": {
       "inputs": {
-        "game-of-life": "game-of-life",
+        "aagl": "aagl",
+        "codex-desktop": "codex-desktop",
         "home-manager": "home-manager",
-        "nixos-cosmic": "nixos-cosmic",
+        "lanzaboote": "lanzaboote",
-        "nixos-wsl": "nixos-wsl",
+        "linux-wallpaper-engine": "linux-wallpaper-engine",
-        "nixpkgs": "nixpkgs_4",
+        "millennium": "millennium",
+        "nixpkgs": "nixpkgs_2",
+        "nixpkgs-unstable": "nixpkgs-unstable",
+        "simple-wallpaper-engine": "simple-wallpaper-engine",
         "snowfall-lib": "snowfall-lib",
         "sops-nix": "sops-nix",
+        "wallpaperengine": "wallpaperengine",
         "zen-browser": "zen-browser"
       }
     },
     "rust-overlay": {
       "inputs": {
         "nixpkgs": [
-          "nixos-cosmic",
+          "aagl",
           "nixpkgs"
         ]
       },
       "locked": {
-        "lastModified": 1733452419,
+        "lastModified": 1785907205,
-        "narHash": "sha256-eh2i2GtqdWVOP7yjiWtB8FMUWktCZ4vjo81n6g5mSiE=",
+        "narHash": "sha256-Ds1vTi53af4wDMAveSR/K0JnywDslLwmgwhVIiwnNmY=",
         "owner": "oxalica",
         "repo": "rust-overlay",
-        "rev": "020701e6057992329a7cfafc6e3c5d5658bbcf79",
+        "rev": "c5cb13481d718fac906aa9cfd85f9b60e1a546cb",
         "type": "github"
       },
       "original": {
@@ -312,6 +679,48 @@
         "type": "github"
       }
     },
+    "rust-overlay_2": {
+      "inputs": {
+        "nixpkgs": [
+          "lanzaboote",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1782012058,
+        "narHash": "sha256-9mWUnReOUXfKjZuJAL/bAFH3LUyECTRtXgSNVjRw3UY=",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "rev": "8534567325bd8a8d2928e6afd81e0a87d19efd3c",
+        "type": "github"
+      },
+      "original": {
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "type": "github"
+      }
+    },
+    "simple-wallpaper-engine": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ],
+        "utils": "utils"
+      },
+      "locked": {
+        "lastModified": 1772136897,
+        "narHash": "sha256-2RBgZWq80zXVWyOswUlDaoRZtaeT6pBkbNCLdAzLYoY=",
+        "owner": "Maxnights",
+        "repo": "simple-linux-wallpaperengine-gui",
+        "rev": "43ae644754a0a5e96c8ddb9077843643b74f9acc",
+        "type": "github"
+      },
+      "original": {
+        "owner": "Maxnights",
+        "repo": "simple-linux-wallpaperengine-gui",
+        "type": "github"
+      }
+    },
     "snowfall-lib": {
       "inputs": {
         "flake-compat": "flake-compat_3",
@@ -321,11 +730,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1732544274,
+        "lastModified": 1784328457,
-        "narHash": "sha256-qvzLIxuqukl0nxpXHEh5+iw1BLeLxYOwRC0+7cFUbPo=",
+        "narHash": "sha256-4R5WV74NHhPk21ctoPmjL7nQ6txDnoBLwSWULvIw0TY=",
         "owner": "snowfallorg",
         "repo": "lib",
-        "rev": "cfeacd055545ab5de0ecfd41e09324dcd8fb2bbb",
+        "rev": "6ee3542cb459ca4b038cfe50ceb8797f05cdabad",
         "type": "github"
       },
       "original": {
@@ -341,11 +750,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1733128155,
+        "lastModified": 1788337237,
-        "narHash": "sha256-m6/qwJAJYcidGMEdLqjKzRIjapK4nUfMq7rDCTmZajc=",
+        "narHash": "sha256-gkSH8VUtCo6hnysNmb9DbTuDepH2t5pv+QWjP75xKAk=",
         "owner": "mic92",
         "repo": "sops-nix",
-        "rev": "c6134b6fff6bda95a1ac872a2a9d5f32e3c37856",
+        "rev": "fbf759290e0cb0a98dfc813a4eb7d53ad1dacb57",
         "type": "github"
       },
       "original": {
@@ -354,6 +763,23 @@
         "type": "github"
       }
     },
+    "stb": {
+      "flake": false,
+      "locked": {
+        "lastModified": 1741976854,
+        "narHash": "sha256-FkTeRO/AC5itykH4uWNsE0UeQTS34VtGGoej5QJiBlg=",
+        "owner": "nothings",
+        "repo": "stb",
+        "rev": "f0569113c93ad095470c54bf34a17b36646bbbb5",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nothings",
+        "repo": "stb",
+        "rev": "f0569113c93ad095470c54bf34a17b36646bbbb5",
+        "type": "github"
+      }
+    },
     "systems": {
       "locked": {
         "lastModified": 1681028828,
@@ -384,20 +810,136 @@
         "type": "github"
       }
     },
-    "zen-browser": {
+    "systems_3": {
-      "inputs": {
-        "nixpkgs": "nixpkgs_5"
-      },
       "locked": {
-        "lastModified": 1727721329,
+        "lastModified": 1681028828,
-        "narHash": "sha256-QYlWZwUSwrM7BuO+dXclZIwoPvBIuJr6GpFKv9XKFPI=",
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
-        "owner": "MarceColl",
+        "owner": "nix-systems",
-        "repo": "zen-browser-flake",
+        "repo": "default",
-        "rev": "e6ab73f405e9a2896cce5956c549a9cc359e5fcc",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
         "type": "github"
       },
       "original": {
-        "owner": "MarceColl",
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "systems_4": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "systems_5": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "linux-wallpaper-engine",
+          "bun2nix",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1770228511,
+        "narHash": "sha256-wQ6NJSuFqAEmIg2VMnLdCnUc0b7vslUohqqGGD+Fyxk=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "337a4fe074be1042a35086f15481d763b8ddc0e7",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
+    },
+    "utils": {
+      "inputs": {
+        "systems": "systems_4"
+      },
+      "locked": {
+        "lastModified": 1731533236,
+        "narHash": "sha256-l0KFg5HjrsfsO/JpG+r7fRrqm12kzFHyUHqHCVpMMbI=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "11707dc2f618dd54ca8739b309ec4fc024de578b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "wallpaperengine": {
+      "inputs": {
+        "Catch2": "Catch2",
+        "MimeTypes": "MimeTypes",
+        "SPIRV-Cross-WallpaperEngine": "SPIRV-Cross-WallpaperEngine",
+        "argparse": "argparse",
+        "glslang-WallpaperEngine": "glslang-WallpaperEngine",
+        "json": "json",
+        "kissfft": "kissfft",
+        "nixpkgs": "nixpkgs_3",
+        "quickjs": "quickjs",
+        "stb": "stb"
+      },
+      "locked": {
+        "lastModified": 1792233763,
+        "narHash": "sha256-jT37HuSiRnYEJlmZwsu2+WqcaUIaLJXTkpZuXXCLX54=",
+        "owner": "Hion-V",
+        "repo": "linux-wallpaperengine",
+        "rev": "482ecf2b08a8111eed993dfcd44b6126b6e43c91",
+        "type": "github"
+      },
+      "original": {
+        "owner": "Hion-V",
+        "ref": "Hion-V/prod",
+        "repo": "linux-wallpaperengine",
+        "type": "github"
+      }
+    },
+    "zen-browser": {
+      "inputs": {
+        "home-manager": "home-manager_2",
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1788405419,
+        "narHash": "sha256-wuGizAVEmY0u15MYrhgy7AoQdHg+4Y2QiC+v/mxA8dc=",
+        "owner": "0xc000022070",
+        "repo": "zen-browser-flake",
+        "rev": "fdb83f8fce835213fab7eab52c375926fe1a32dc",
+        "type": "github"
+      },
+      "original": {
+        "owner": "0xc000022070",
         "repo": "zen-browser-flake",
         "type": "github"
       }

flake.nix

@@ -3,23 +3,63 @@
 
   inputs = {
     # nixpkgs.url = "github:nixos/nixpkgs/nixos-24.05";
-    nixpkgs.url = "github:NixOS/nixpkgs/nixos-unstable";
+    nixpkgs.url = "github:NixOS/nixpkgs/nixos-26.05";
-    nixos-wsl.url = "github:nix-community/NixOS-WSL/main";
+    # Application exceptions; keep the system and graphics stack on stable.
+    nixpkgs-unstable.url = "github:NixOS/nixpkgs/nixos-unstable";
+    # nixos-wsl = {
+    #   url = "github:nix-community/NixOS-WSL/main";
+    #   inputs.nixpkgs.follows = "nixpkgs";
+    # };
     # Snowfallorg's Flake utility
     snowfall-lib = {
       url = "github:snowfallorg/lib";
       inputs.nixpkgs.follows = "nixpkgs";
     };
-    game-of-life.url = "github:local-interloper/game-of-life";
+    # game-of-life = {
-    nixos-cosmic.url = "github:lilyinstarlight/nixos-cosmic";
+    #   url = "github:local-interloper/game-of-life";
+    #   inputs.nixpkgs.follows = "nixpkgs";
+    # };
     # Add sops-nix for secrets management
     sops-nix = {
       url = "github:mic92/sops-nix";
       inputs.nixpkgs.follows = "nixpkgs";
     };
-    zen-browser.url = "github:MarceColl/zen-browser-flake";
+    zen-browser = {
+      url = "github:0xc000022070/zen-browser-flake";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
     home-manager = {
-      url = "github:nix-community/home-manager";
+      url = "github:nix-community/home-manager/release-26.05";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    # anikki = {
+    #   url = "github:Hion-V/Anikki-flake";
+    #   inputs.nixpkgs.follows = "nixpkgs";
+    # };
+    lanzaboote = {
+      url = "github:nix-community/lanzaboote/v1.1.0";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    # kwin-effects-forceblur = { Archived.
+    #   url = "github:taj-ny/kwin-effects-forceblur";
+    #   inputs.nixpkgs.follows = "nixpkgs";
+    # };
+    aagl = {
+      url = "github:ezKEa/aagl-gtk-on-nix/release-26.05";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    wallpaperengine.url = "github:Hion-V/linux-wallpaperengine/Hion-V/prod";
+    simple-wallpaper-engine = {
+      url = "github:Maxnights/simple-linux-wallpaperengine-gui";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    linux-wallpaper-engine.url = "github:jagrat7/linux-wallpaper-engine";
+    millennium = {
+      url = "github:SteamClientHomebrew/Millennium?dir=packages/nix";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    codex-desktop = {
+      url = "github:ilysenko/codex-desktop-linux";
       inputs.nixpkgs.follows = "nixpkgs";
     };
   };
@@ -61,13 +101,18 @@
       inherit inputs;
       src = ./.;
       
+      overlays = with inputs; [
+        inputs.millennium.overlays.default
+      ];
+      
       nixos = with inputs; [
+        
         # disko.nixosModules.disko
         # impermanence.nixosModules.impermanence
         home-manager.nixosModules.home-manager
         {
           home-manager = {
-            useGlobalPkgs = true;
+            useGlobalPkgs = false;  # Disabled to allow system-level overlays to work
             useUserPackages = true;
           };
         }
@@ -78,6 +123,25 @@
 
       systems.modules.nixos = with inputs; [
         # my-input.nixosModules.my-module
+        lanzaboote.nixosModules.lanzaboote ({ pkgs, lib, ... }: {
+          environment.systemPackages = [
+            # For debugging and troubleshooting Secure Boot.
+            pkgs.sbctl
+          ];
+
+
+          boot.loader.systemd-boot.configurationLimit = 4;
+          # Lanzaboote currently replaces the systemd-boot module.
+          # This setting is usually set to true in configuration.nix
+          # generated at installation time. So we force it to false
+          # for now.
+          boot.loader.systemd-boot.enable = lib.mkForce false;
+
+          boot.lanzaboote = {
+            enable = true;
+            pkiBundle = "/var/lib/sbctl";
+          };
+        })
       ];
 
       # The attribute set specified here will be passed directly to NixPkgs when
@@ -85,7 +149,9 @@
       channels-config = {
         # Allow unfree packages.
         allowUnfree = true;
-
+        permittedInsecurePackages = [
+          "mbedtls-2.28.10" # needed for haxe 4.3.6
+        ];
         # # Allow certain insecure packages
         # permittedInsecurePackages = [
         #   "firefox-100.0.0"

homes/x86_64-linux/andreas@drivebystation-nix/default.nix

@@ -6,6 +6,26 @@
 }:
 let
   inherit (lib.my-namespace) enabled;
+  system = pkgs.stdenv.hostPlatform.system;
+  jagratWallpaperEngine =
+    (inputs.linux-wallpaper-engine.packages.${system}.default.override {
+      linux-wallpaperengine = inputs.wallpaperengine.packages.${system}.default;
+    }).overrideAttrs (old: {
+      # Forge 7 expects a default export, but the bundled Vite exposes named exports.
+      preBuild = (old.preBuild or "") + ''
+        substituteInPlace node_modules/@electron-forge/plugin-vite/dist/VitePlugin.js \
+          --replace-fail 'const vite_1 = __importDefault(require("vite"));' \
+            'const vite_1 = { default: require("vite") };'
+      '';
+    });
+  simpleWallpaperEngine =
+    inputs.simple-wallpaper-engine.packages.${system}.default.override {
+      # The upstream GUI package otherwise puts nixpkgs' unmodified
+      # linux-wallpaperengine in its wrapped PATH.
+      pkgs = pkgs // {
+        linux-wallpaperengine = inputs.wallpaperengine.packages.${system}.default;
+      };
+    };
 in
 {
   imports = [
@@ -14,6 +34,7 @@ in
   my-namespace.home = {
     stream-tools = enabled;
     gnome-customizations = enabled;
+    vesktop-appimage = enabled;
     # networking = enabled;
     # personal-apps = enabled;
     # suites.laptop = enabled;
@@ -21,13 +42,35 @@ in
   home = {
     packages = [
       pkgs.nil
-      pkgs.steam
-      pkgs.gamemode
       pkgs.beeper
+      pkgs.mpv
       pkgs.my-namespace.udev-steelseries
       pkgs.qbittorrent
-      pkgs.vesktop
+      pkgs.hyfetch
+      pkgs.libreoffice
+      pkgs.localsend
+      simpleWallpaperEngine
+      # Separate GUI for manual testing; keep the existing GUI's autostart.
+      jagratWallpaperEngine
+      # pkgs.vesktop
       pkgs.obsidian
-      inputs.zen-browser.packages.x86_64-linux.default    ];
+      inputs.zen-browser.packages.x86_64-linux.default    
+      # inputs.kwin-effects-forceblur.packages.${pkgs.stdenv.hostPlatform.system}.default # Archived.
+    ];
   };
+  xdg.autostart = {
+    enable = true;
+    entries = [
+      "${simpleWallpaperEngine}/share/applications/simple-wallpaper-engine-autostart.desktop"
+    ];
+  };
+  # Auto-start linux-wallpaperengine for dual monitors via XDG autostart
+  # xdg.configFile."autostart/linux-wallpaperengine.desktop".text = ''
+  #   [Desktop Entry]
+  #   Type=Application
+  #   Name=Wallpaper Engine
+  #   Exec=${pkgs.my-namespace.linux-wallpaperengine}/bin/linux-wallpaperengine --screen-root DP-1 --bg 2935872330 --screen-root DP-2 --bg 2935872330 -f 12
+  #   X-KDE-autostart-after=panel
+  #   X-KDE-StartupNotify=false
+  # '';
 }

homes/x86_64-linux/andreas@th0nkpad-nixos/default.nix

@@ -1,25 +0,0 @@
-{ config
-, lib
-, pkgs
-, ...
-}:
-let
-  inherit (lib.my-namespace) enabled;
-in
-{
-  imports = [
-    # ../modules.nix
-  ];
-  my-namespace.home = {
-    stream-tools = enabled;
-    # networking = enabled;
-    # personal-apps = enabled;
-    # suites.laptop = enabled;
-  };
-  home = {
-    packages = [ 
-      pkgs.nil
-      pkgs.beeper
-    ];
-  };
-}

homes/x86_64-linux/gaming@drivebystation-nix/default.nix

@@ -20,12 +20,10 @@ in
   home = {
     packages = [
       pkgs.nil
-      pkgs.steam
-      pkgs.gamemode
       pkgs.beeper
       pkgs.my-namespace.udev-steelseries
       pkgs.qbittorrent
-      pkgs.vesktop
+      #pkgs.vesktop
     ];
   };
 }

modules/home/gnome-customizations/default.nix

@@ -1,5 +1,4 @@
-{ pkgs
+{ config
-, config
 , lib
 , ...
 }:

modules/home/home/default.nix

@@ -1,19 +1,40 @@
 {
-  config,
+  # Snowfall Lib provides a customized `lib` instance with access to your flake's library
-  lib,
+  # as well as the libraries available from your flake's inputs.
-  pkgs,
+  lib
-  ...
+, # An instance of `pkgs` with your overlays and packages applied is also available.
-}: let
+  pkgs
+, # You also have access to your flake's inputs.
+  inputs
+, # Additional metadata is provided by Snowfall Lib.
+  namespace
+, # The namespace used for your flake, defaulting to "internal" if not set.
+  system
+, # The system architecture for this host (eg. `x86_64-linux`).
+  target
+, # The Snowfall Lib target for this system (eg. `x86_64-iso`).
+  format
+, # A normalized name for the system target (eg. `iso`).
+  virtual
+, # A boolean to determine whether this system is a virtual target using nixos-generators.
+  systems
+, # An attribute map of your defined hosts.
+  # All other arguments come from the module system.
+  config
+, ...
+}:
+let
   inherit (lib) mkIf;
   inherit (lib.my-namespace) enabled;
 
   imp = config.my-namespace.home.impermanence.enable;
-in {
+in
+{
   config = {
     home = {
       packages = with pkgs; [
         inetutils
-        neofetch
+        hyfetch
         tmux
         # nerdfonts
         p7zip
@@ -22,7 +43,7 @@ in {
         unzip
         zip
       ];
-      sessionPath = ["$HOME/bin" "$HOME/.local/bin"];
+      sessionPath = [ "$HOME/bin" "$HOME/.local/bin" ];
       shellAliases = {
         # "df" = "duf -only local";
         # "du" = "dust -xd1 --skip-total";
@@ -52,8 +73,6 @@ in {
       };
       home-manager = enabled;
     };
-    services = {
+    services = { };
-      
-    };
   };
 }

modules/home/stream-tools/default.nix

@@ -16,11 +16,19 @@ in {
   config = mkIf cfg.enable {
     programs.obs-studio = {
       enable = true;
-      plugins = [ pkgs.obs-studio-plugins.droidcam-obs ];
+      plugins = with pkgs.obs-studio-plugins; [
+        wlrobs
+        obs-backgroundremoval
+        obs-pipewire-audio-capture
+        obs-vaapi #optional AMD hardware acceleration
+        obs-gstreamer
+        obs-vkcapture
+        pkgs.my-namespace.droidcam-obs  # Custom override with FFmpeg 6
+      ];
     };
     home = {
       packages = with pkgs; [
-        # obs-studio
+        config.programs.obs-studio.finalPackage
         droidcam
       ];
     };

modules/home/vesktop-appimage/default.nix

@@ -0,0 +1,49 @@
+{ config, pkgs, lib, ... }:
+let
+  inherit (lib) mkEnableOption mkIf;
+  cfg = config.my-namespace.home.vesktop-appimage;
+  vesktopVersion = "1.6.4";
+
+  vesktopAppImage = pkgs.runCommand "vesktop-appimage" { } ''
+    cp ${pkgs.fetchurl {
+      url = "https://github.com/Vencord/Vesktop/releases/download/v${vesktopVersion}/Vesktop-${vesktopVersion}.AppImage";
+      sha256 = "sha256-o7A8DBQyutONeLp5rstq9hQko2xxbvYZvGGM8/YOQ8s=";      
+    }} $out
+    chmod +x $out
+  '';
+
+  vesktopWrapped = pkgs.writeShellScriptBin "vesktop" ''
+    exec ${pkgs.appimage-run}/bin/appimage-run ${vesktopAppImage} "$@"
+  '';
+
+  vesktopIcon = pkgs.fetchurl {
+    url = "https://raw.githubusercontent.com/Vencord/Vesktop/main/build/icon.svg";
+    sha256 = "sha256-fQ+dvbPIb4AFd9f7JqIt7+twJdEMQF9jTTwrk5p1vn8=";
+  };
+
+in
+{
+  options.my-namespace.home.vesktop-appimage = {
+    enable = mkEnableOption "Install Vesktop (AppImage) with Vencord support";
+  };
+
+  config = mkIf cfg.enable {
+
+    xdg.dataFile."icons/hicolor/scalable/apps/vesktop.svg".source = vesktopIcon;
+
+    home.packages = [
+      pkgs.appimage-run
+      vesktopWrapped
+    ];
+
+    xdg.desktopEntries.vesktop = {
+      name = "Vesktop";
+      comment = "Discord client with Vencord (AppImage)";
+      exec = "${vesktopWrapped}/bin/vesktop";
+      icon = "vesktop";
+      terminal = false;
+      type = "Application";
+      categories = [ "Network" "Chat" ];
+    };
+  };
+}

modules/nixos/cosmic-desktop/default.nix

@@ -1,32 +0,0 @@
-{ config
-, lib
-, inputs
-, pkgs
-, ...
-}:
-let
-  inherit (lib) mkEnableOption mkIf;
-  inherit (lib.my-namespace) disabled enabled;
-
-  cfg = config.my-namespace.cosmic-desktop;
-  # moduleImports = {
-  #   "enabled" = [inputs.nixos-cosmic.nixosModules.default];
-  #   "disabled" = [];
-  # };
-  # optionalImports = { imports = []; };
-in
-{
-  options.my-namespace.cosmic-desktop = {
-    enable = mkEnableOption "Enable nvidia";
-  };
-  imports = [ inputs.nixos-cosmic.nixosModules.default ];
-  config = mkIf cfg.enable {
-    nix.settings = {
-      substituters = [ "https://cosmic.cachix.org/" ];
-      trusted-public-keys = [ "cosmic.cachix.org-1:Dya9IyXD4xdBehWjrkPv6rtxpmMdRel02smYzA85dPE=" ];
-    };
-    
-    services.desktopManager.cosmic.enable = true;
-    services.displayManager.cosmic-greeter.enable = true;
-  };
-}

modules/nixos/cs-tools/default.nix

@@ -0,0 +1,24 @@
+{ lib, pkgs, config, namespace, ... }:
+
+let
+  cfg = config.${namespace}.cs-tools;
+in
+{
+  options.${namespace}.cs-tools = {
+    enable = lib.mkEnableOption "CS tools including CS Demo Manager and PostgreSQL";
+  };
+
+  config = lib.mkIf cfg.enable {
+    services.postgresql = {
+      enable = true;
+      ensureDatabases = [ "csdm" ];
+      ensureUsers = [{
+        name = "csdm";
+      }];
+    };
+    environment.systemPackages = with pkgs; [
+      my-namespace.cs-demo-manager
+      postgresql
+    ];
+  };
+}

modules/nixos/desktop-environment/default.nix

@@ -0,0 +1,160 @@
+{ config, lib, pkgs, namespace, ... }:
+
+let
+  cfg = config.${namespace}.desktop-environment;
+in {
+
+  options.${namespace}.desktop-environment = {
+    cinnamon = {
+      enable = lib.mkEnableOption "Cinnamon desktop environment";
+    };
+    xfce = {
+      enable = lib.mkEnableOption "XFCE desktop environment";
+    };
+    gnome = {
+      enable = lib.mkEnableOption "GNOME desktop environment";
+    };
+    kde = {
+      enable = lib.mkEnableOption "KDE Plasma desktop environment";
+    };
+    cosmic = {
+      enable = lib.mkEnableOption "Cosmic desktop environment";
+    };
+    hyprland = {
+      enable = lib.mkEnableOption "hyprland Wayland shell";
+    };
+  };
+
+  config = lib.mkMerge [
+    (lib.mkIf cfg.xfce.enable {
+      services.xserver = {
+        enable = true;
+        desktopManager = {
+          cinnamon.enable = true;
+        };
+      };
+      environment.sessionVariables.NIX_GSETTINGS_OVERRIDES_DIR = 
+        lib.mkForce "${pkgs.gnome.nixos-gsettings-overrides}/share/gsettings-schemas/nixos-gsettings-overrides/glib-2.0/schemas";
+    })
+    (lib.mkIf cfg.xfce.enable {
+      services.xserver = {
+        enable = true;
+        desktopManager = {
+          xfce.enable = true;
+        };
+      };
+      environment.systemPackages = with pkgs; [
+        xfce4-pulseaudio-plugin
+        xfce4-clipman-plugin
+        xfce4-screenshooter
+        xfce4-whiskermenu-plugin
+        thunar-archive-plugin
+        thunar-volman
+        gvfs
+        gnome-keyring
+        libgnome-keyring
+      ];
+    })
+
+    (lib.mkIf cfg.gnome.enable {
+      services.xserver = {
+        enable = true;
+      };
+      services.desktopManager.gnome.enable = true;
+      services.gnome.gnome-remote-desktop.enable = true;
+      systemd.services.gnome-remote-desktop = { 
+        wantedBy = [ "graphical.target" ]; # for starting the unit automatically at boot
+      };
+      services.displayManager.autoLogin.enable = false;
+      networking.firewall.allowedTCPPorts = [ 
+        3389 
+        3390
+      ];
+
+      # users.users.andreas.extraGroups = [ "sambashare" ];    
+      # Enable Avahi (mDNS/DNS-SD) for discovery
+      services.avahi = {
+        enable = true;
+        nssmdns4 = true;
+        openFirewall = true;
+      };
+      # Enable GNOME sharing services
+      services.gnome.gnome-user-share.enable = true;
+
+      environment.systemPackages = with pkgs; [
+        gnome-tweaks
+        ptyxis
+        gnome-software
+        gnomeExtensions.pop-shell
+        gnome-remote-desktop
+        dconf-editor
+        glib-networking # Required gnome-remote-desktop dependency
+      ];
+      systemd.user.services.gnome-remote-desktop.environment = {
+        VK_ICD_FILENAMES = "/dev/null";
+        LIBGL_ALWAYS_SOFTWARE = "1";
+      };
+
+      systemd.services.gnome-remote-desktop.environment = {
+        VK_ICD_FILENAMES = "/dev/null";
+        LIBGL_ALWAYS_SOFTWARE = "1";
+      };
+      environment.sessionVariables.XDG_DATA_DIRS = lib.mkAfter [
+        "${pkgs.gnome-remote-desktop}/share"
+      ];
+      environment.pathsToLink = [
+        "/share/gsettings-schemas"
+        "/share"
+      ];
+    })
+
+    (lib.mkIf cfg.kde.enable {
+      services.xserver.enable = true;
+      services.desktopManager.plasma6.enable = true;
+      environment.sessionVariables = {
+        # Forces KWin to use the legacy DRM interface so "Allow Tearing" actually works
+        # KWIN_DRM_NO_AMS = "1";
+        # Disables the new triple buffering in Plasma 6.1+ to reduce latency
+        # KWIN_DRM_DISABLE_TRIPLE_BUFFERING = "1";
+        # KWIN_USE_HWCURSOR = "0";
+        # KWIN_DRM_USE_EGL_STREAMS = "0";
+        # MESA_VK_WSI_PRESENT_MODE = "immediate";
+        # vblank_mode = "0";
+      };
+      environment.systemPackages = with pkgs; [
+        kdePackages.qtwebsockets
+        kdePackages.qtwebchannel
+        kdePackages.korganizer
+        kdePackages.akonadi
+        kdePackages.akonadi-calendar
+        kdePackages.akonadi-contacts
+        kdePackages.kaddressbook
+        kdePackages.kmail
+        kdePackages.kdepim-runtime
+        kdePackages.kontact
+        kdePackages.kidentitymanagement
+        kdePackages.libkdepim
+        kdePackages.kwin
+        kdePackages.plasma-workspace
+        gnome-keyring
+        libgnome-keyring
+      ];
+    })
+    (lib.mkIf cfg.cosmic.enable {
+      services.desktopManager.cosmic.enable = true;
+      services.desktopManager.cosmic.xwayland.enable = true;
+      environment.systemPackages = with pkgs; [
+        
+        gnome-keyring
+        libgnome-keyring
+      ];
+    })
+    (lib.mkIf cfg.hyprland.enable {
+      programs.hyprland.enable = true; # enable Hyprland
+      environment.systemPackages = with pkgs; [
+        pkgs.kitty # required for the default Hyprland config
+      ];
+    })
+  ];
+
+}

modules/nixos/distrobox/default.nix

@@ -0,0 +1,21 @@
+{
+  config,
+  lib,
+  pkgs,
+  namespace,
+  ...
+}:
+let
+  cfg = config.${namespace}.distrobox;
+in
+{
+  options.${namespace}.distrobox = {
+    enable = lib.mkEnableOption "Distrobox with a Podman container backend";
+  };
+
+  config = lib.mkIf cfg.enable {
+    environment.systemPackages = [ pkgs.distrobox ];
+
+    virtualisation.podman.enable = true;
+  };
+}

modules/nixos/file-organization/default.nix

@@ -0,0 +1,23 @@
+{
+  config,
+  lib,
+  pkgs,
+  namespace,
+  ...
+}:
+let
+  cfg = config.${namespace}.file-organization;
+in
+{
+  options.${namespace}.file-organization = {
+    enable = lib.mkEnableOption "file organization software";
+  };
+  config = lib.mkIf cfg.enable {
+    environment.systemPackages = with pkgs; [
+      ranger
+      fsearch
+      qdirstat
+      veracrypt
+    ];
+  };
+}

modules/nixos/gnome-keyring/default.nix

@@ -0,0 +1,30 @@
+{ config, lib, pkgs, namespace, options, ... }:
+
+let
+  cfg = config.${namespace}.gnome-keyring;
+in {
+  options.${namespace}.gnome-keyring = {
+    enable = lib.mkEnableOption "Enable GNOME Keyring integration";    
+  };
+  
+  config = lib.mkIf cfg.enable {
+    services.gnome.gnome-keyring.enable = true;
+    
+    # PAM configuration for automatic keyring unlock
+    security.pam.services.sddm.enableGnomeKeyring = true;
+    security.pam.services.login.enableGnomeKeyring = true;
+    security.pam.services.gdm.enableGnomeKeyring = true;
+
+    # Make KDE apps use GNOME Keyring as the Secret Service backend
+    environment.variables = {
+      # Set GNOME Keyring as the SSH agent
+      SSH_AUTH_SOCK = "$XDG_RUNTIME_DIR/keyring/ssh";
+    };
+
+    environment.systemPackages = with pkgs; [
+      seahorse # GUI for managing the keyring
+      gcr # Keyring integration
+      libsecret # Secret Service API library for KDE apps
+    ];
+  };
+}

modules/nixos/hardware/graphics-nvidia-prime-amd-testing/default.nix

@@ -1,136 +0,0 @@
-{ config
-, lib
-, pkgs
-, ...
-}:
-let
-  inherit (lib) mkEnableOption mkIf;
-  inherit (lib.my-namespace) disabled enabled;
-
-  cfg = config.my-namespace.hardware.graphics-nvidia-prime-amd-testing;
-in
-{
-  options.my-namespace.hardware.graphics-nvidia-prime-amd-testing = {
-    enable = mkEnableOption "Enable nvidia";
-  };
-  config = mkIf cfg.enable {
-
-    # Enable NVIDIA driver for X11 and Wayland
-    # without modesetting, x server will be run by nvidia
-    services.xserver.videoDrivers = [ 
-      "amdgpu"
-      "modesetting"
-      "nvidia" 
-    ];
-
-    # Enable OpenGL
-    hardware.graphics = {
-      enable = true;
-      extraPackages = with pkgs; [ nvidia-vaapi-driver ];
-    };
-
-    # Use Beta Driver Package
-    boot.extraModulePackages = [ config.boot.kernelPackages.nvidia_x11_beta ];
-
-
-
-    boot.loader.systemd-boot.consoleMode = "max";
-
-    # Enable required Kernel Modules
-    boot.initrd.kernelModules = [
-      "amdgpu"
-      "nvidia"
-      # "nvidia-drm"
-      "nvidiafb"
-      # "nvidia-uvm"
-      # "nvidia-modeset"
-      # "i2c-nvidia_gpu"    
-    ];
-
-
-    boot.kernelParams = [
-      "amdgpu.modeset=1"
-      "nvidia-drm.fbdev=1"
-      "nvidia-drm.modeset=1"
-      #  "nvidia.NVreg_PreserveVideoMemoryAllocations=0"
-      "amd_iommu=on"
-      # "vfio-pci.ids=\"10de:2489,10de:228b\""
-      # "nomodeset"
-      #  "nvidia_drm.modeset=1"
-    ];
-
-
-    # Blacklist intel and nouveau
-    boot.blacklistedKernelModules = [
-      "i915"
-      "nouveau"
-      # "nvidia"
-      # "nvidia-drm"
-      # "nvidia-uvm"
-      # "nvidiafb"
-      # "nvidia_drm"
-      # "nvidia_modeset"
-    ];
-
-    # Extra blacklist nouveau
-    boot.extraModprobeConfig = ''
-      blacklist nouveau
-      options nouveau modeset=0
-    '';
-
-    # Configure NVIDIA driver
-    hardware.nvidia = {
-      # Modesetting is required.
-      modesetting.enable = true;
-      
-      # Nvidia power management. Experimental, and can cause sleep/suspend to fail.
-      # Enable this if you have graphical corruption issues or application crashes after waking
-      # up from sleep. This fixes it by saving the entire VRAM memory to /tmp/ instead 
-      # of just the bare essentials.
-      powerManagement.enable = true;
-
-      # Fine-grained power management. Turns off GPU when not in use.
-      # Experimental and only works on modern Nvidia GPUs (Turing or newer).
-      powerManagement.finegrained = false;
-
-      # Use the NVidia open source kernel module (not to be confused with the
-      # independent third-party "nouveau" open source driver).
-      # Support is limited to the Turing and later architectures. Full list of 
-      # supported GPUs is at: 
-      # https://github.com/NVIDIA/open-gpu-kernel-modules#compatible-gpus 
-      # Only available from driver 515.43.04+
-      # Currently alpha-quality/buggy, so false is currently the recommended setting.
-      open = false;
-
-      # Enable the Nvidia settings menu,
-      # accessible via `nvidia-settings`.
-      nvidiaSettings = true;
-
-      # Optionally, you may need to select the appropriate driver version for your specific GPU.
-      package = config.boot.kernelPackages.nvidiaPackages.beta;
-      # package = config.boot.kernelPackages.nvidiaPackages.none;
-      # package = config.boot.kernelPackages.nvidiaPackages.production;
-
-      forceFullCompositionPipeline = false;
-
-      prime = {
-        offload = {
-          enable = true;
-          enableOffloadCmd = true;
-        };
-        reverseSync.enable = false;
-        # Make sure to use the correct Bus ID values for your system!
-        # intelBusId = "PCI:0:2:0";
-        nvidiaBusId = "PCI:01:0:0";
-        amdgpuBusId = "PCI:50:0:0"; #For AMD GPU
-      };
-
-    };
-
-    # Add user to extra groups
-    users.users.andreas = {
-      extraGroups = [ "video" "render" ];
-    };
-
-  };
-}

modules/nixos/hardware/graphics-nvidia-prime-amd/default.nix

@@ -1,131 +0,0 @@
-{ config
-, lib
-, pkgs
-, ...
-}:
-let
-  inherit (lib) mkEnableOption mkIf;
-  inherit (lib.my-namespace) disabled enabled;
-
-  cfg = config.my-namespace.hardware.graphics-nvidia-prime-amd;
-in
-{
-  options.my-namespace.hardware.graphics-nvidia-prime-amd = {
-    enable = mkEnableOption "Enable nvidia";
-  };
-  config = mkIf cfg.enable {
-
-    # Enable NVIDIA driver for X11 and Wayland
-    services.xserver.videoDrivers = [ "amdgpu" "nvidia" ];
-
-    # Enable OpenGL
-    hardware.graphics = {
-      enable = true;
-      extraPackages = with pkgs; [ nvidia-vaapi-driver ];
-    };
-
-    # Use Beta Driver Package
-    boot.extraModulePackages = [ config.boot.kernelPackages.nvidia_x11_beta ];
-
-
-
-    boot.loader.systemd-boot.consoleMode = "max";
-
-    # Enable required Kernel Modules
-    boot.initrd.kernelModules = [
-      "amdgpu"
-      "nvidia"
-      # "nvidia-drm"
-      "nvidiafb"
-      # "nvidia-uvm"
-      # "nvidia-modeset"
-      # "i2c-nvidia_gpu"    
-    ];
-
-
-    boot.kernelParams = [
-      "amdgpu.modeset=1"
-      "nvidia-drm.fbdev=1"
-      "nvidia-drm.modeset=0"
-      #  "nvidia.NVreg_PreserveVideoMemoryAllocations=0"
-      "amd_iommu=on"
-      # "vfio-pci.ids=\"10de:2489,10de:228b\""
-      # "nomodeset"
-      #  "nvidia_drm.modeset=1"
-    ];
-
-
-    # Blacklist intel and nouveau
-    boot.blacklistedKernelModules = [
-      "i915"
-      "nouveau"
-      # "nvidia"
-      # "nvidia-drm"
-      # "nvidia-uvm"
-      # "nvidiafb"
-      # "nvidia_drm"
-      # "nvidia_modeset"
-    ];
-
-    # Extra blacklist nouveau
-    boot.extraModprobeConfig = ''
-      blacklist nouveau
-      options nouveau modeset=0
-    '';
-
-    # Configure NVIDIA driver
-    hardware.nvidia = {
-      # Modesetting is required.
-      modesetting.enable = true;
-
-      # Nvidia power management. Experimental, and can cause sleep/suspend to fail.
-      # Enable this if you have graphical corruption issues or application crashes after waking
-      # up from sleep. This fixes it by saving the entire VRAM memory to /tmp/ instead 
-      # of just the bare essentials.
-      powerManagement.enable = true;
-
-      # Fine-grained power management. Turns off GPU when not in use.
-      # Experimental and only works on modern Nvidia GPUs (Turing or newer).
-      powerManagement.finegrained = false;
-
-      # Use the NVidia open source kernel module (not to be confused with the
-      # independent third-party "nouveau" open source driver).
-      # Support is limited to the Turing and later architectures. Full list of 
-      # supported GPUs is at: 
-      # https://github.com/NVIDIA/open-gpu-kernel-modules#compatible-gpus 
-      # Only available from driver 515.43.04+
-      # Currently alpha-quality/buggy, so false is currently the recommended setting.
-      open = false;
-
-      # Enable the Nvidia settings menu,
-      # accessible via `nvidia-settings`.
-      nvidiaSettings = true;
-
-      # Optionally, you may need to select the appropriate driver version for your specific GPU.
-      package = config.boot.kernelPackages.nvidiaPackages.beta;
-      # package = config.boot.kernelPackages.nvidiaPackages.none;
-      # package = config.boot.kernelPackages.nvidiaPackages.production;
-
-      forceFullCompositionPipeline = false;
-
-      prime = {
-        offload = {
-          enable = true;
-          enableOffloadCmd = true;
-        };
-        reverseSync.enable = false;
-        # Make sure to use the correct Bus ID values for your system!
-        # intelBusId = "PCI:0:2:0";
-        nvidiaBusId = "PCI:01:0:0";
-        amdgpuBusId = "PCI:50:0:0"; #For AMD GPU
-      };
-
-    };
-
-    # Add user to extra groups
-    users.users.andreas = {
-      extraGroups = [ "video" "render" ];
-    };
-
-  };
-}

modules/nixos/keychron-keyboard/default.nix

@@ -0,0 +1,120 @@
+{ config, lib, pkgs, namespace, ... }:
+
+let
+  cfg = config.${namespace}.keychron-keyboard;
+in {
+  options.${namespace}.keychron-keyboard = {
+    enable = lib.mkEnableOption "Enable Keychron keyboard configuration";
+    # Add additional options here, e.g. vendor/product IDs, keymaps, etc.
+  };
+
+  config = lib.mkIf cfg.enable {
+
+    # Create the plugdev group and ensure users can access HID devices
+    users.groups.plugdev = {};
+
+    hardware.keyboard.qmk.keychronSupport = true;
+    services.udev.packages = with pkgs; [ qmk qmk-udev-rules ];
+
+
+    # Example udev rule or keychron-specific settings
+    services.udev.extraRules = ''
+      # Atmel DFU
+      ### ATmega16U2
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2fef", TAG+="uaccess"
+      ### ATmega32U2
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", TAG+="uaccess"
+      ### ATmega16U4
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff3", TAG+="uaccess"
+      ### ATmega32U4
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", TAG+="uaccess"
+      ### AT90USB64
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff9", TAG+="uaccess"
+      ### AT90USB162
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffa", TAG+="uaccess"
+      ### AT90USB128
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", TAG+="uaccess"
+
+      # Input Club
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", ATTRS{idProduct}=="b007", TAG+="uaccess"
+
+      # STM32duino
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", TAG+="uaccess"
+      # STM32 DFU
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", TAG+="uaccess"
+
+      # BootloadHID
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05df", TAG+="uaccess"
+
+      # USBAspLoader
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05dc", TAG+="uaccess"
+
+      # USBtinyISP
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="1782", ATTRS{idProduct}=="0c9f", TAG+="uaccess"
+
+      # ModemManager should ignore the following devices
+      # Atmel SAM-BA (Massdrop)
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+
+      # Caterina (Pro Micro)
+      ## pid.codes shared PID
+      ### Keyboardio Atreus 2 Bootloader
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="1209", ATTRS{idProduct}=="2302", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ## Spark Fun Electronics
+      ### Pro Micro 3V3/8MHz
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9203", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ### Pro Micro 5V/16MHz
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9205", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ### LilyPad 3V3/8MHz (and some Pro Micro clones)
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9207", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ## Pololu Electronics
+      ### A-Star 32U4
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="1ffb", ATTRS{idProduct}=="0101", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ## Arduino SA
+      ### Leonardo
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ### Micro
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0037", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ## Adafruit Industries LLC
+      ### Feather 32U4
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="239a", ATTRS{idProduct}=="000c", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ### ItsyBitsy 32U4 3V3/8MHz
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="239a", ATTRS{idProduct}=="000d", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ### ItsyBitsy 32U4 5V/16MHz
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="239a", ATTRS{idProduct}=="000e", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ## dog hunter AG
+      ### Leonardo
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0036", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+      ### Micro
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0037", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+
+      # hid_listen
+      KERNEL=="hidraw*", MODE="0666", TAG+="uaccess", TAG+="udev-acl"
+
+      # hidraw devices for WebHID (Keychron Launcher, VIA)
+      SUBSYSTEM=="hidraw", MODE="0666", TAG+="uaccess", TAG+="udev-acl"
+
+      # hid bootloaders
+      ## QMK HID
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2067", TAG+="uaccess"
+      ## PJRC's HalfKay
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="0478", TAG+="uaccess"
+
+      # APM32 DFU
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="314b", ATTRS{idProduct}=="0106", TAG+="uaccess"
+
+      # GD32V DFU
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="28e9", ATTRS{idProduct}=="0189", TAG+="uaccess"
+
+      # WB32 DFU
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="342d", ATTRS{idProduct}=="dfa0", TAG+="uaccess"
+
+      # AT32 DFU
+      SUBSYSTEMS=="usb", ATTRS{idVendor}=="2e3c", ATTRS{idProduct}=="df11", TAG+="uaccess"
+    '';
+    #
+    # home.file.".config/some-config".text = ''
+    #   # keyboard-related configuration
+    # '';
+  };
+}

modules/nixos/nixos/default.nix

@@ -0,0 +1,53 @@
+############################################
+#
+#   Shared System Configuration module that's always enabled by default courtesy of snowfall lib
+#
+############################################
+{
+  # Snowfall Lib provides a customized `lib` instance with access to your flake's library
+  # as well as the libraries available from your flake's inputs.
+  lib
+, # An instance of `pkgs` with your overlays and packages applied is also available.
+  pkgs
+, # You also have access to your flake's inputs.
+  inputs
+, # Additional metadata is provided by Snowfall Lib.
+  namespace
+, # The namespace used for your flake, defaulting to "internal" if not set.
+  system
+, # The system architecture for this host (eg. `x86_64-linux`).
+  target
+, # The Snowfall Lib target for this system (eg. `x86_64-iso`).
+  format
+, # A normalized name for the system target (eg. `iso`).
+  virtual
+, # A boolean to determine whether this system is a virtual target using nixos-generators.
+  systems
+, # An attribute map of your defined hosts.
+
+  # All other arguments come from the module system.
+  config
+, ...
+}:
+let
+  inherit (lib) mkIf;
+  inherit (lib.my-namespace) enabled;
+in
+{
+  config = {
+    boot = { };
+    console = { };
+    environment = {
+      systemPackages =
+        (with pkgs; [
+          age
+          wget
+          sops
+          bitwarden-desktop #replaced bitwarden
+          bitwarden-cli
+          cowsay
+          remmina
+        ]);
+    };
+  };
+}

modules/nixos/performance-tuning/default.nix

@@ -0,0 +1,23 @@
+{ config, lib, pkgs, namespace, ... }:
+
+let
+  cfg = config.${namespace}.performance-tuning;
+in {
+  options.${namespace}.performance-tuning.enable = lib.mkEnableOption "performance tuning settings for gaming and general use";
+  config = lib.mkIf cfg.enable {
+    boot.kernelParams = [
+      "nvme_core.default_ps_max_latency_us=0"
+    ];
+
+    boot.kernel.sysctl = {
+      "vm.swappiness" = 10;
+      "vm.dirty_ratio" = 10;
+      "vm.dirty_background_ratio" = 5;
+    };
+
+    services.pipewire.extraConfig.pipewire."context.properties" = {
+      "default.clock.quantum" = 256;
+      "default.clock.min-quantum" = 128;
+    };
+  };
+}

modules/nixos/rtl8125-recovery/default.nix

@@ -0,0 +1,58 @@
+{ config, lib, pkgs, namespace, ... }:
+let
+  cfg = config.${namespace}.rtl8125-recovery;
+  recovery = pkgs.writeShellApplication {
+    name = "rtl8125-recover";
+    runtimeInputs = with pkgs; [ coreutils gnugrep pciutils ethtool systemd ];
+    text = builtins.readFile ./recover.sh;
+  };
+in {
+  options.${namespace}.rtl8125-recovery = {
+    enable = lib.mkEnableOption "RTL8125 PCI recovery after boot and resume";
+    pciAddress = lib.mkOption {
+      type = lib.types.str;
+      default = "0000:0a:00.0";
+      description = "PCI address of the onboard RTL8125 controller.";
+    };
+    bridgeAddress = lib.mkOption {
+      type = lib.types.str;
+      default = "0000:06:03.0";
+      description = "Immediate parent PCI bridge of the controller.";
+    };
+  };
+
+  config = lib.mkIf cfg.enable {
+    systemd.services.rtl8125-recovery = {
+      description = "Recover RTL8125 from failed PCI power restoration";
+      wantedBy = [ "multi-user.target" ];
+      after = [ "NetworkManager.service" ];
+      environment = {
+        NIC_PCI = cfg.pciAddress;
+        NIC_BRIDGE = cfg.bridgeAddress;
+      };
+      serviceConfig = {
+        Type = "oneshot";
+        ExecStart = lib.getExe recovery;
+        TimeoutStartSec = "90s";
+        StateDirectory = "rtl8125-recovery";
+        StateDirectoryMode = "0700";
+        UMask = "0077";
+      };
+    };
+
+    # sleep.target is stopped after resume. Queue recovery separately so its
+    # grace period does not hold up the sleep transaction or user sessions.
+    systemd.services.rtl8125-resume = {
+      description = "Queue RTL8125 recovery after waking";
+      wantedBy = [ "sleep.target" ];
+      before = [ "sleep.target" ];
+      unitConfig.StopWhenUnneeded = true;
+      serviceConfig = {
+        Type = "oneshot";
+        RemainAfterExit = true;
+        ExecStart = "${pkgs.coreutils}/bin/true";
+        ExecStop = "${pkgs.systemd}/bin/systemctl --no-block start rtl8125-recovery.service";
+      };
+    };
+  };
+}

modules/nixos/rtl8125-recovery/recover.sh

@@ -0,0 +1,98 @@
+# Called once after boot or resume. No network access is required.
+set -euo pipefail
+nic="/sys/bus/pci/devices/$NIC_PCI"
+bridge="/sys/bus/pci/devices/$NIC_BRIDGE"
+log() { echo "rtl8125-recovery: $*"; }
+disable_eee() {
+    local netdir
+    for netdir in "$nic"/net/*; do
+        [[ -e "$netdir/ifindex" ]] || continue
+        ethtool --set-eee "$(basename "$netdir")" eee off
+    done
+}
+
+# Let normal PCI and network resume finish before diagnosing anything.
+sleep 10
+if [[ ! -d "$bridge" ]]; then
+    log "Parent bridge $NIC_BRIDGE is absent; refusing recovery."
+    exit 1
+fi
+if [[ $(cat "$bridge/vendor") != 0x1022 || $(cat "$bridge/device") != 0x43f5 ]]; then
+    log "Parent bridge identity changed; refusing recovery."
+    exit 1
+fi
+
+if [[ -d "$nic" ]]; then
+    if [[ $(cat "$nic/vendor") != 0x10ec || $(cat "$nic/device") != 0x8125 ]]; then
+        log "Device at $NIC_PCI is not an RTL8125; refusing recovery."
+        exit 1
+    fi
+    if [[ $(dirname "$(readlink -f "$nic")") != "$(readlink -f "$bridge")" ]]; then
+        log "NIC is no longer directly below the configured bridge; refusing recovery."
+        exit 1
+    fi
+    power=$(cat "$nic/power_state")
+    command=$(timeout 5 setpci -s "$NIC_PCI" COMMAND 2>/dev/null || true)
+    # Both memory decoding and bus mastering should be enabled on this host.
+    # Disconnected cables do not disable these PCI command bits.
+    if [[ "$power" == D0 && "$command" =~ ^[[:xdigit:]]{4}$ && "${command,,}" != ffff ]] &&
+        (( (16#$command & 6) == 6 )); then
+        log "PCI state healthy ($power, COMMAND=$command); no recovery needed."
+        disable_eee
+        exit 0
+    fi
+    # An administratively disabled NIC should not be automatically reset.
+    netdirs=("$nic"/net/*)
+    if [[ -e "${netdirs[0]}/flags" ]]; then
+        flags=$(cat "${netdirs[0]}/flags")
+        if (( (flags & 1) == 0 )); then
+            log "Interface is administratively down; leaving it alone."
+            exit 0
+        fi
+    fi
+    log "Failed PCI state: power=$power COMMAND=$command."
+else
+    log "NIC missing; attempting one rescan of its known bridge."
+fi
+
+# Retain evidence from the latest failure without accumulating unlimited logs.
+evidence="${STATE_DIRECTORY:-/var/lib/rtl8125-recovery}/last-failure.log"
+mkdir -p "$(dirname "$evidence")"
+{
+    date -Is
+    timeout 5 lspci -s "$NIC_PCI" -vv || true
+    timeout 5 lspci -s "$NIC_BRIDGE" -vv || true
+    journalctl -b -k --since '10 minutes ago' -n 250 --no-pager || true
+} > "$evidence" 2>&1
+
+# This is the remove/rescan recovery that worked on this machine. Never reset
+# or remove the parent bridge, which could affect other hardware.
+if [[ -d "$nic" ]]; then
+    echo 1 > "$nic/remove"
+fi
+echo 1 > "$bridge/rescan"
+
+for ((attempt=0; attempt<20; attempt++)); do
+    netdirs=("$nic"/net/*)
+    if [[ -e "${netdirs[0]}/ifindex" ]]; then
+        iface=$(basename "${netdirs[0]}")
+        power=$(cat "$nic/power_state")
+        command=$(timeout 5 setpci -s "$NIC_PCI" COMMAND 2>/dev/null || true)
+        if [[ "$power" == D0 && "$command" =~ ^[[:xdigit:]]{4}$ && "${command,,}" != ffff ]] &&
+            (( (16#$command & 6) == 6 )); then
+            # NetworkManager also reapplies the saved profile. Explicitly
+            # restore WoL here so recovery does not depend on its timing.
+            ethtool -s "$iface" wol g
+            disable_eee
+            if ! ethtool "$iface" | grep -Eq '^[[:space:]]*Wake-on: g$'; then
+                log "PCI recovered, but magic-packet WoL could not be confirmed."
+                exit 1
+            fi
+            log "Recovered $iface in D0; magic-packet WoL enabled. Evidence: $evidence"
+            exit 0
+        fi
+    fi
+    sleep 1
+done
+log "Recovery did not restore operational PCI state; no further attempt this invocation."
+exit 1

modules/nixos/steam/default.nix

@@ -0,0 +1,92 @@
+{
+  # Snowfall Lib provides a customized `lib` instance with access to your flake's library
+  # as well as the libraries available from your flake's inputs.
+  lib, 
+  # An instance of `pkgs` with your overlays and packages applied is also available.
+  pkgs, 
+  # You also have access to your flake's inputs.
+  inputs, 
+  # Additional metadata is provided by Snowfall Lib.
+  # The namespace used for your flake, defaulting to "internal" if not set.
+  namespace, 
+  # The system architecture for this host (eg. `x86_64-linux`).
+  system, 
+  # The Snowfall Lib target for this system (eg. `x86_64-iso`).
+  target, 
+  # A normalized name for the system target (eg. `iso`).
+  format, 
+  # A boolean to determine whether this system is a virtual target using nixos-generators.
+  virtual, 
+  # An attribute map of your defined hosts.
+  systems, 
+  # All other arguments come from the system system.
+  config
+, ...
+}:{
+  config = {
+    # programs.gamescope = {
+    #   enable = true;
+    #   capSysNice = true;
+    # };
+    environment.systemPackages = with pkgs; [
+      protonup-ng  # Tool to install and manage Proton-GE
+      lutris
+      faugus-launcher
+      vkd3d
+      dxvk
+      protontricks
+      mangohud
+      vkbasalt
+      gamescope
+      corefonts
+    ];
+
+    hardware.uinput.enable = true;
+    users.users.andreas.extraGroups = [ "input" ];
+    # Explicitly register the desktop MIME scheme handler
+    xdg.mime = {
+      enable = true;
+      defaultApplications = {
+        "x-scheme-handler/steam" = [ "steam.desktop" ];
+        "x-scheme-handler/steamlink" = [ "steam.desktop" ];
+      };
+    };
+    programs.gamescope.enable = true;
+    programs.steam.gamescopeSession = {
+      enable = true;
+      args = [
+        "-w" "1920"
+        "-h" "1080"
+        "-r" "172"
+        "-e" # Enable steam integration
+        "--steam"
+        "--prefer-outpout DP-4"
+        "--prefer-vk-device 8086:e20b" # lspci -nn | grep VGA
+      ];
+      env = {
+        # WLR_RENDERER = "vulkan";
+        # DXVK_HDR = "0 ";
+        # ENABLE_GAMESCOPE_WSI = "0";
+        # WINE_FULLSCREEN_FSR = "1";
+        # SDL_VIDEODRIVER = "wayland,x11"; # Games allegedly prefer X11
+      };
+    };
+    
+    programs.steam = {
+      enable = true;
+      package = pkgs.millennium-steam.override {
+        extraPkgs = pkgs: with pkgs; [
+          gamemode
+          noto-fonts-color-emoji
+        ];
+        extraEnv = {
+          # SDL_VIDEODRIVER = "wayland,x11";
+          # SDL_VIDEODRIVER = "x11,wayland";
+        };
+      };
+      remotePlay.openFirewall = true; # Open ports in the firewall for Steam Remote Play
+      dedicatedServer.openFirewall = true; # Open ports in the firewall for Source Dedicated Server
+      localNetworkGameTransfers.openFirewall = true; # Open ports in the firewall for Steam Local Network Game Transfers
+    };
+  };
+}

modules/nixos/wallpaper-engine-kde-plugin/default.nix

@@ -0,0 +1,71 @@
+{ lib, pkgs, inputs, config, namespace, ... }:
+
+let
+  # Import the plugin as a package derivation from your local repo
+  # Pass the 'inputs' parameter explicitly to make wallpaper-engine-plugin-src available
+  wallpaperEnginePkg = pkgs.callPackage ../../../packages/wallpaper-engine-kde-plugin/default.nix { inherit inputs; };
+in {
+  options.${namespace}.wallpaper-engine-kde-plugin.enable =
+    lib.mkEnableOption "Enable Wallpaper Engine KDE plugin";
+
+  config = lib.mkIf config.${namespace}.wallpaper-engine-kde-plugin.enable {
+    # Add the imported package and helper script to systemPackages
+    environment.systemPackages = [ 
+      wallpaperEnginePkg 
+      (pkgs.writeShellScriptBin "wallpaper-engine-kde-setup" ''
+        #!/usr/bin/env bash
+        set -e
+        
+        STEAM_DIR="$HOME/.local/share/Steam"
+        WORKSHOP_PATH="$STEAM_DIR/steamapps/workshop/content/431960"
+        
+        echo "Wallpaper Engine KDE Plugin Setup Helper"
+        echo "========================================"
+        
+        # Check if Steam directory exists
+        if [ -d "$STEAM_DIR" ]; then
+          echo "✅ Steam directory found at: $STEAM_DIR"
+          
+          if [ -d "$WORKSHOP_PATH" ]; then
+            echo "✅ Workshop content directory found at: $WORKSHOP_PATH"
+            echo "   You can use this path in the wallpaper settings."
+          else
+            echo "⚠️  Workshop content directory not found at the expected location."
+            echo "   Please locate your Steam workshop content for Wallpaper Engine (app ID 431960)"
+          fi
+        else
+          echo "⚠️  Steam directory not found at: $STEAM_DIR"
+          echo "   Please install Steam and Wallpaper Engine first."
+        fi
+        
+        # Check symlinks
+        if [ -L "$HOME/.local/share/plasma/wallpapers/com.github.catsout.wallpaperEngineKde" ]; then
+          echo "✅ Plugin symlink is correctly set up"
+        else
+          echo "⚠️  Plugin symlink not found, attempting to create it..."
+          mkdir -p "$HOME/.local/share/plasma/wallpapers"
+          ln -sf /run/current-system/sw/share/plasma/wallpapers/com.github.catsout.wallpaperEngineKde \
+                "$HOME/.local/share/plasma/wallpapers/com.github.catsout.wallpaperEngineKde"
+          echo "   Done! Symlink created."
+        fi
+        
+        echo ""
+        echo "To use Wallpaper Engine wallpapers in KDE:"
+        echo "1. Right-click on desktop → Configure Desktop and Wallpaper"
+        echo "2. Select 'Wallpaper Engine' from the wallpaper type list"
+        echo "3. Set the path to your workshop content directory"
+      '')
+    ];
+
+    systemd.user.services.wallpaperEngineSymlink = {
+      description = "Symlink Wallpaper Engine plugin for Plasma";
+      wantedBy = [ "graphical-session.target" ];
+      serviceConfig = {
+        Type = "oneshot";
+        ExecStartPre = "${pkgs.coreutils}/bin/mkdir -p %h/.local/share/plasma/wallpapers";
+        ExecStart = "${pkgs.coreutils}/bin/ln -sfn /run/current-system/sw/share/plasma/wallpapers/com.github.catsout.wallpaperEngineKde %h/.local/share/plasma/wallpapers/com.github.catsout.wallpaperEngineKde";
+        RemainAfterExit = true;
+      };
+    };
+  };
+}

overlays/openldap-testfailure-fix/default.nix

@@ -0,0 +1,7 @@
+{ ... }:
+
+final: prev: {
+  openldap = prev.openldap.overrideAttrs {
+    doCheck = !prev.stdenv.hostPlatform.isi686;
+  };
+}

overlays/vscode-modernized/default.nix

@@ -0,0 +1,105 @@
+# overlays/vscode-modernized/default.nix
+{ ... }:
+
+final: prev:
+
+let
+  modernized = prev.fetchFromGitHub {
+    owner = "Sukarth";
+    repo = "VS-Code-Modernized";
+    # Pin this once working.
+    rev = "main";
+    hash = "sha256-QSmdmCoF2L42ZUxYpJXq6REOdNObK9DBI6c0GEQ32rQ=";
+  };
+
+  injectModernized = vscodePkg:
+    vscodePkg.overrideAttrs (old: {
+      postInstall = (old.postInstall or "") + ''
+        (
+          set -euo pipefail
+
+          candidates=(
+            "$out/lib/vscode/resources/app/out/vs/code/electron-sandbox/workbench/workbench.html"
+            "$out/lib/vscode/resources/app/out/vs/code/electron-sandbox/workbench/workbench.esm.html"
+            "$out/lib/vscode/resources/app/out/vs/code/electron-browser/workbench/workbench.html"
+            "$out/lib/vscode/resources/app/out/vs/code/electron-browser/workbench/workbench.esm.html"
+          )
+
+          workbench=""
+          for candidate in "''${candidates[@]}"; do
+            if [ -f "$candidate" ]; then
+              workbench="$candidate"
+              break
+            fi
+          done
+
+          if [ -z "$workbench" ]; then
+            echo "VS Code Modernized: could not find workbench.html" >&2
+            find "$out/lib/vscode/resources/app/out/vs" -name 'workbench*.html' -print >&2 || true
+            exit 1
+          fi
+
+          # Build one self-contained CSS file.
+          cat > /tmp/vscode-modernized-inline.css <<'EOF'
+/* VS Code Modernized dynamic settings */
+:root {
+  --vscode-modernized-spacing: 0.35rem;
+  --vscode-modernized-border-radius: 0.5rem;
+  --vscode-modernized-tab-spacing: 0.2rem;
+}
+EOF
+
+          cat "${modernized}/styles/styles.css" >> /tmp/vscode-modernized-inline.css
+
+          # Smoke-test styles. Remove later if you want.
+          cat >> /tmp/vscode-modernized-inline.css <<'EOF'
+
+/* Modernized dims inactive icons to 20%; let the theme control contrast instead. */
+.monaco-workbench .part.activitybar .monaco-action-bar .action-item.icon:not(.disabled) {
+  opacity: 1;
+}
+
+/* Nix smoke test: these should be very visible */
+.monaco-workbench .part.sidebar,
+.monaco-workbench .part.auxiliarybar,
+.monaco-workbench .part.panel,
+.monaco-workbench .editor-group-container,
+.monaco-workbench .tabs-container,
+.monaco-workbench .tab,
+.monaco-workbench .monaco-list-row,
+.monaco-workbench .quick-input-widget {
+  border-radius: var(--vscode-modernized-border-radius) !important;
+  overflow: hidden !important;
+}
+
+.monaco-workbench .part.sidebar,
+.monaco-workbench .part.panel,
+.monaco-workbench .editor-group-container {
+  margin: var(--vscode-modernized-spacing) !important;
+}
+EOF
+
+          css="$(sed \
+            -e 's/&/\&amp;/g' \
+            -e 's/</\&lt;/g' \
+            -e 's/>/\&gt;/g' \
+            /tmp/vscode-modernized-inline.css)"
+
+          inject="
+<!-- VS Code Modernized - Nix injected -->
+<style id=\"vscode-modernized-nix\">
+$css
+</style>
+<!-- /VS Code Modernized - Nix injected -->
+"
+
+          substituteInPlace "$workbench" \
+            --replace-fail '</html>' "$inject
+</html>"
+        )
+      '';
+    });
+in
+{
+  vscode-modernized = injectModernized prev.vscode;
+}

packages/cs-demo-manager/default.nix

@@ -0,0 +1,43 @@
+{ lib
+, stdenv
+, fetchurl
+, appimageTools
+, postgresql
+, procps
+, ...
+}:
+
+let
+  pname = "cs-demo-manager";
+  version = "3.18.2";
+
+  src = fetchurl {
+    url = "https://github.com/akiver/cs-demo-manager/releases/download/v${version}/CS-Demo-Manager-${version}.AppImage";
+    hash = "sha256-REEhqvfYSKD7EyIYJVlbkQu0h5FZcofc8X7Zhu1xZnA="; # You need to add the hash after first build attempt
+  };
+
+  appimageContents = appimageTools.extract {
+    inherit pname version src;
+  };
+in
+appimageTools.wrapType2 {
+  inherit pname version src;
+
+  extraPkgs = pkgs: [ postgresql procps  ];
+
+  extraInstallCommands = ''
+    install -m 444 -D ${appimageContents}/cs-demo-manager.desktop $out/share/applications/cs-demo-manager.desktop
+    install -m 444 -D ${appimageContents}/cs-demo-manager.png $out/share/icons/hicolor/512x512/apps/cs-demo-manager.png
+
+    substituteInPlace $out/share/applications/cs-demo-manager.desktop \
+      --replace 'Exec=AppRun' 'Exec=${pname}'
+  '';
+
+  meta = with lib; {
+    description = "An application to manage Counter-Strike demos";
+    homepage = "https://github.com/akiver/cs-demo-manager";
+    license = licenses.gpl2Plus;
+    platforms = [ "x86_64-linux" ];
+    maintainers = [ ];
+  };
+}

packages/droidcam-obs/default.nix

@@ -0,0 +1,46 @@
+{
+  lib,
+  pkgs,
+  stdenv,
+  fetchurl,
+  autoPatchelfHook,
+  namespace,
+  ...
+}:
+
+stdenv.mkDerivation rec {
+  pname = "droidcam-obs";
+  version = "2.4.1";
+
+  src = fetchurl {
+    url = "https://github.com/dev47apps/droidcam-obs-plugin/releases/download/${version}/droidcam_obs_${version}_linux_x86_64.zip";
+    sha256 = "sha256-18IjC3+WR5XLo464RuwAtWRNSpQcsnarXu56CrxCMhM=";
+  };
+
+  nativeBuildInputs = [ pkgs.unzip autoPatchelfHook ];
+  
+  buildInputs = with pkgs; [
+    stdenv.cc.cc.lib
+    obs-studio
+  ];
+
+  dontBuild = true;
+
+  installPhase = ''
+    runHook preInstall
+    mkdir -p $out/lib/obs-plugins
+    mkdir -p $out/share/obs/obs-plugins/droidcam-obs
+    
+    cp bin/64bit/*.so $out/lib/obs-plugins/
+    cp -r data/* $out/share/obs/obs-plugins/droidcam-obs/
+    
+    runHook postInstall
+  '';
+
+  meta = with lib; {
+    description = "DroidCam OBS Plugin - Use your phone as a camera in OBS (FFmpeg 7 compatible)";
+    homepage = "https://www.dev47apps.com/obs/";
+    license = licenses.unfree;
+    platforms = platforms.linux;
+  };
+}

packages/hello/default.nix

@@ -1,69 +0,0 @@
-{
-    # Snowfall Lib provides a customized `lib` instance with access to your flake's library
-    # as well as the libraries available from your flake's inputs.
-    lib,
-    # You also have access to your flake's inputs.
-    inputs,
-
-    # The namespace used for your flake, defaulting to "internal" if not set.
-    namespace,
-
-    # All other arguments come from NixPkgs. You can use `pkgs` to pull packages or helpers
-    # programmatically or you may add the named attributes as arguments here.
-    stdenv,
-    fetchurl,
-    nixos,
-    callPackage,
-    testers,
-    versionCheckHook,
-    hello,
-    ...
-}:
-stdenv.mkDerivation (finalAttrs: {
-  pname = "hello";
-  version = "2.12.1";
-
-  src = fetchurl {
-    url = "mirror://gnu/hello/hello-${finalAttrs.version}.tar.gz";
-    hash = "sha256-jZkUKv2SV28wsM18tCqNxoCZmLxdYH2Idh9RLibH2yA=";
-  };
-
-  # The GNU Hello `configure` script detects how to link libiconv but fails to actually make use of that.
-  # Unfortunately, this cannot be a patch to `Makefile.am` because `autoreconfHook` causes a gettext
-  # infrastructure mismatch error when trying to build `hello`.
-  env = lib.optionalAttrs stdenv.hostPlatform.isDarwin {
-    NIX_LDFLAGS = "-liconv";
-  };
-
-  doCheck = true;
-
-  doInstallCheck = true;
-  nativeInstallCheckInputs = [
-    versionCheckHook
-  ];
-
-  # Give hello some install checks for testing purpose.
-  postInstallCheck = ''
-    stat "''${!outputBin}/bin/${finalAttrs.meta.mainProgram}"
-  '';
-
-  passthru.tests = {
-    version = testers.testVersion { package = hello; };
-  };
-
-  passthru.tests.run = callPackage ./test.nix { hello = finalAttrs.finalPackage; };
-
-  meta = {
-    description = "Program that produces a familiar, friendly greeting";
-    longDescription = ''
-      GNU Hello is a program that prints "Hello, world!" when you run it.
-      It is fully customizable.
-    '';
-    homepage = "https://www.gnu.org/software/hello/manual/";
-    changelog = "https://git.savannah.gnu.org/cgit/hello.git/plain/NEWS?h=v${finalAttrs.version}";
-    license = lib.licenses.gpl3Plus;
-    maintainers = with lib.maintainers; [ stv0g ];
-    mainProgram = "hello";
-    platforms = lib.platforms.all;
-  };
-})

packages/hello/test.nix

@@ -1,8 +0,0 @@
-{ runCommand, hello }:
-
-runCommand "hello-test-run" {
-  nativeBuildInputs = [ hello ];
-} ''
-  diff -U3 --color=auto <(hello) <(echo 'Hello, world!')
-  touch $out
-''

packages/linux-wallpaperengine/default.nix

@@ -0,0 +1,135 @@
+{
+  lib,
+  stdenv,
+  fetchFromGitHub,
+  autoPatchelfHook,
+  cmake,
+  file,
+  pkg-config,
+  python3,
+  SDL2,
+  SDL2_mixer,
+  cef-binary,
+  egl-wayland,
+  ffmpeg,
+  fftw,
+  glew,
+  glfw,
+  glm,
+  gmp,
+  kissfftFloat,
+  libxau,
+  libxdmcp,
+  libxpm,
+  libxrandr,
+  libxxf86vm,
+  libdecor,
+  libffi,
+  libglut,
+  libpng,
+  libpulseaudio,
+  lz4,
+  mpv,
+  wayland,
+  wayland-protocols,
+  wayland-scanner,
+  zlib,
+  nix-update-script,
+  inputs,
+  namespace, ...
+}:
+
+let
+  cef = cef-binary.override {
+    version = "135.0.17"; # follow upstream. https://github.com/Almamu/linux-wallpaperengine/blob/b39f12757908eda9f4c1039613b914606568bb84/CMakeLists.txt#L47
+    gitRevision = "cbc1c5b";
+    chromiumVersion = "135.0.7049.52";
+
+    srcHashes = {
+      aarch64-linux = "sha256-LK5JvtcmuwCavK7LnWmMF2UDpM5iIZOmsuZS/t9koDs=";
+      x86_64-linux = "sha256-JKwZgOYr57GuosM31r1Lx3DczYs35HxtuUs5fxPsTcY=";
+    };
+  };
+in
+stdenv.mkDerivation (finalAttrs: {
+  pname = "linux-wallpaperengine";
+  version = "0-unstable-2025-12-19";
+
+  src = fetchFromGitHub {
+    owner = "Almamu";
+    repo = "linux-wallpaperengine";
+    rev = "f79c29f067b2613895419e351033582464577154";
+    fetchSubmodules = true;
+    hash = "sha256-AISdouVqMXTYErQoT7oM5H+vlrw03NtpI9FqDwZ0J9A=";
+  };
+
+  nativeBuildInputs = [
+    autoPatchelfHook
+    cmake
+    file
+    pkg-config
+    python3
+  ];
+
+  buildInputs = [
+    SDL2
+    SDL2_mixer
+    egl-wayland
+    ffmpeg
+    fftw
+    glew
+    glfw
+    glm
+    gmp
+    kissfftFloat
+    libxau
+    libxdmcp
+    libxpm
+    libxrandr
+    libxxf86vm
+    libdecor
+    libffi
+    libglut
+    libpng
+    libpulseaudio
+    lz4
+    mpv
+    wayland
+    wayland-protocols
+    wayland-scanner
+    zlib
+  ];
+
+  cmakeFlags = [
+    "-DCEF_ROOT=${cef}"
+    "-DCMAKE_INSTALL_PREFIX=${placeholder "out"}/share/linux-wallpaperengine"
+  ];
+
+  postInstall = ''
+    rm -rf $out/bin $out/lib $out/include
+    chmod 755 $out/share/linux-wallpaperengine/linux-wallpaperengine
+    mkdir $out/bin
+    ln -s $out/share/linux-wallpaperengine/linux-wallpaperengine $out/bin/linux-wallpaperengine
+  '';
+
+  preFixup = ''
+    find $out/share/linux-wallpaperengine -type f -exec file {} \; | grep 'ELF' | cut -d: -f1 | while read -r elf_file; do
+      patchelf --shrink-rpath --allowed-rpath-prefixes "$NIX_STORE" "$elf_file"
+    done
+  '';
+
+  passthru.updateScript = nix-update-script { extraArgs = [ "--version=branch" ]; };
+
+  meta = {
+    description = "Wallpaper Engine backgrounds for Linux";
+    homepage = "https://github.com/Almamu/linux-wallpaperengine";
+    license = lib.licenses.gpl3Plus;
+    mainProgram = "linux-wallpaperengine";
+    maintainers = [ ];
+    platforms = [
+      "x86_64-linux"
+      "aarch64-linux"
+    ];
+    hydraPlatforms = [ "x86_64-linux" ]; # Hydra "aarch64-linux" fails with "Output limit exceeded"
+  };
+})

packages/rounded-blur/default.nix

@@ -0,0 +1,89 @@
+{
+  lib,
+  stdenv,
+  fetchFromGitHub,
+  meson,
+  ninja,
+  pkg-config,
+  gobject-introspection,
+  glib,
+  gnome,
+  mutter,
+  cairo,
+  gsettings-desktop-schemas,
+  wayland,
+  libglvnd,
+  libxfixes,
+  libxi,
+  atk,
+  libxkbcommon,
+  clutter,
+  cmake,
+  gnome-shell,
+  lcms2,
+}:
+
+stdenv.mkDerivation {
+  pname = "gnome-rounded-blur";
+  version = "unstable-2026-06-11";
+
+  src = fetchFromGitHub {
+    owner = "kancko";
+    repo = "gnome-rounded-blur";
+    # Replace this with a fixed commit.
+    rev = "master";
+    # Run once with lib.fakeHash, then replace with the real hash.
+    hash = "sha256-MBeb0/Drt0UQ/K8UaW93ae9OaV3L5nhFZB2tPwj47co=";
+  };
+
+  nativeBuildInputs = [
+    meson
+    ninja
+    pkg-config
+    gobject-introspection
+    cmake
+  ];
+
+  buildInputs = [
+    glib
+    mutter
+    cairo
+    gsettings-desktop-schemas
+    wayland
+    libglvnd
+    libxfixes
+    libxi
+    atk
+    libxkbcommon
+    clutter
+    (lib.getDev mutter)
+    (lib.getLib mutter)
+    (lib.getDev gnome-shell)
+    (lib.getLib gnome-shell)
+    lcms2 # required by mutter-clutter
+  ];
+  postFixup = ''
+    for libfile in $out/lib/libblur-effect-1.0.so*; do
+      if [ -f "$libfile" ] && [ ! -L "$libfile" ]; then
+        patchelf --set-rpath "${
+          lib.makeLibraryPath [
+            glib
+            wayland
+            (lib.getLib mutter)
+          ]
+        }:$out/lib" "$libfile"
+      fi
+    done
+  '';
+  # The upstream meson file installs:
+  # - libblur-effect-1.0.so*
+  # - Blur-1.0.gir
+  # - Blur-1.0.typelib
+  # See src/meson.build.
+  meta = {
+    description = "Rounded blur GObject library for GNOME Shell extensions";
+    homepage = "https://github.com/kancko/gnome-rounded-blur";
+    license = lib.licenses.gpl3Plus;
+    platforms = lib.platforms.linux;
+  };
+}

packages/rounded-windows-bms/default.nix

@@ -0,0 +1,53 @@
+{
+  lib,
+  stdenvNoCC,
+  fetchFromGitHub,
+  glib,
+}:
+
+stdenvNoCC.mkDerivation rec {
+  pname = "rounded-windows-bms";
+  version = "2.2.0-bms-fix";
+
+  src = fetchFromGitHub {
+    owner = "MeguMario";
+    repo = "rounded-windows";
+    rev = "bms-fix";
+
+    # Put a fake hash first; Nix will tell you the real one.
+    hash = "sha256-5llnqW1dK3jsMRfvxb1VrSkZ/DSXsfU3PiNmpbb5CLw=";
+  };
+
+  nativeBuildInputs = [
+    glib
+  ];
+
+  installPhase = ''
+    runHook preInstall
+
+    uuid="rounded-windows@marcosgt.github.io"
+    extension_dir="$out/share/gnome-shell/extensions/$uuid"
+
+    mkdir -p "$extension_dir"
+
+    cp metadata.json extension.js effect.js prefs.js stylesheet.css "$extension_dir/"
+
+    mkdir -p "$extension_dir/schemas"
+    cp schemas/*.xml "$extension_dir/schemas/"
+
+    glib-compile-schemas "$extension_dir/schemas"
+
+    runHook postInstall
+  '';
+
+  passthru = {
+    extensionUuid = "rounded-windows@marcosgt.github.io";
+  };
+
+  meta = {
+    description = "Rounded Window Corners GNOME extension with Blur-My-Shell compatibility fix";
+    homepage = "https://github.com/MeguMario/rounded-windows/tree/bms-fix";
+    license = lib.licenses.gpl3Only;
+    platforms = lib.platforms.linux;
+  };
+}

secrets.yaml

@@ -20,23 +20,32 @@ sops:
         - recipient: age19j24x89dfh4f7v58c8k64yupqas4f7qkkyper7yj9dd7vqwvvq0qkyvhxk
           enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBBdGZlV3R4eW5FYS9HZGYr
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSB4U204eXIyaDJFMXIweXp1
-            N3VSR0tIbzUrL0RsUEw2NkZtUWcxVG55bEIwCjQ5U0Ztd1luUEQ2SEg4RHA2RWRK
+            NEhoYU5qa3B5Q1VpODNsSEpuT0txRWpuVDM0CmptVHNFQkpWTkJ2M3B4dWpWN0s4
-            K3dhN2liMDYyZElhbkZEUC9namhrc2MKLS0tIEhYTEYwQWduNkdKbGJQcTBRUWVG
+            ZjRuc3BhckVLSzFuOGJ3WTB0YnRRRDgKLS0tIHlaSUxITUlGU3VaRWZFbENUTVY2
-            aDMwR1I5NG13dUhwRXg1TXI4dG9nWXMKti+hv0+7/Rz0W22bToYs1/DFzoMllHpB
+            SWVwUGVxcGJscG5PalphZFVIS1ZjY2MKi4VvrNW1AH+fJaI/rzOltPylSiY1z3nS
-            7uuVpUFDuC2D40ize0UX4rJ8Yo63lhJrRpsxIhzkP/vq+wMAFrKKLg==
+            ebrYdpyM5KKQ46uezvU4J3Qau/Inv8CkZ72vHlQ6EK2kmmZZLszwJg==
             -----END AGE ENCRYPTED FILE-----
         - recipient: age1ma8x6wugvc40mkst33mejq0m6r44jk6zwjjun3znyer5nztgn9vs0nwjx4
           enc: |
             -----BEGIN AGE ENCRYPTED FILE-----
-            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBnK0dSTTVJWmt3aS91UmFm
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSAyVHVwMEZjVk8xMTNIekF1
-            Ui9zT3VpMlBybWJXOVdKdU5mTkprdU5WRm00CktHd2g4M1VldHhTQyszRTVTOUtt
+            ZFlZbFhvOTJSbVN4ZmorSmFCbkxBUUxOOERJCjBjMkdxQ0V4OXEwdGF2Sno4VTh2
-            Mld4a3lYSHF2SytIc0RjQ1RoODQvaE0KLS0tIGN3SlpMeTEvNktNSm5oT0dXRVFr
+            MURQMUhQV083M3lpREFRM2Qza3JLN0kKLS0tIEFoeUVsL3poajljMDEwTCtWcXRD
-            UmZrTXhyM2hYWW1kY05xa01PM1MzUDAK67AkP1XE445RXbVxcksRXL7MYHFjLPLV
+            Y3NHNmVDZFZuNjlUUDdMa3N3ZVNTWkUKeO4sT0ZyTAyrMKj27fbFhQZ+bDMru6Bk
-            ITL404AabakBeOX9yixwymzkD1BbUYEdW6N28ntqdH5cZZfVteYdMA==
+            j4Im41l9ClpIVQt8iz61mwKrm+QmBA9r1aL34u3lGQyKBOk4vq/m9A==
             -----END AGE ENCRYPTED FILE-----
-    lastmodified: "2024-11-07T10:47:23Z"
+        - recipient: age1s5qwsuc3e4m3c4w5hl6tyja70w273gr60j9j9dcpc6mz69lemg3qpwud3h
-    mac: ENC[AES256_GCM,data:zqkbmx7XIHQnOVkozPLiBzsNhACbGwvWiFcFlEHhlyEeQ7rvltLlUlgivb7aawwG1RuxCwshHwLfuKRQ/iGJcXjFO4UM5VER6CAA/88UrpgXW8VBw8iuchr+Y58lu0s+98fj7VffcuWjhJ1AYvBxFaTZA6DjxFjv3l1Gyxtw6kM=,iv:XG9Qb61INy1OJZjI3cDbY9fswLqf8+QvcUMrmtKGtuQ=,tag:+JacTF/+qU+j/cm8Wn1c8g==,type:str]
+          enc: |
+            -----BEGIN AGE ENCRYPTED FILE-----
+            YWdlLWVuY3J5cHRpb24ub3JnL3YxCi0+IFgyNTUxOSBUT3dKNk4rSVZUck5LZ2t1
+            eUhPSXBURUFGbnU4NUtjMVVpeGI5eVI1SVc4CkdTY25jTy91VFhLS1F3V3ZzM1A4
+            OGMxWmtWd1lVU3dZcG8xWlRwYkorSU0KLS0tIE12WlFyUWZ0dHYvTEd0N0tPWUt1
+            bldpMnp5cnpXN2J5MEc5cC9DZktEekUKC6sei7v252fZyW8sd1xuZDjwoJFCKGot
+            t9f+jUDOx5wGlH53Fd2jCRArKZkQ850sFj79Lh2Rx6wbDj1Ks5XcVA==
+            -----END AGE ENCRYPTED FILE-----
+    lastmodified: "2024-12-10T04:12:19Z"
+    mac: ENC[AES256_GCM,data:AcuCxKGm9xLgn/gnk0XDVtLM5PWQvgGd+qXusuvwCUV4ln1//Lpwpp3TL0mEMdwEcFOdCasW4A10rGpCoBqKsckroiUSEB0G2p0vrD3b3Vmo804JYcKmSZ85InZCXUWenfOTEzx/A1ruqSBSkRYro+NdyZ/+JXQVXnTLCPesgwE=,iv:UPRNsfeUKnml9OFkkqrI0fI4f/RWN2ovTsaItwT8Y0c=,tag:75NEPjeAXUwlCPGbLPhPFg==,type:str]
     pgp: []
     unencrypted_suffix: _unencrypted
     version: 3.9.1

shell.nix

@@ -0,0 +1,29 @@
+let
+  nixpkgs = fetchTarball "https://github.com/NixOS/nixpkgs/tarball/nixos-24.05";
+  pkgs = import nixpkgs { config = { }; overlays = [ ]; };
+in
+
+pkgs.mkShellNoCC {
+  packages = with pkgs; [
+    cowsay
+    lolcat
+    # bitwarden-desktop #replaced bitwarden
+    bitwarden-cli
+    sops
+  ];
+
+  GREETING = "Hello, Nix!";
+
+  shellHook = ''
+    echo $GREETING | cowsay | lolcat
+    bw config server https://vault.subsonics.nl
+    echo "please enter bitwarden email"
+    read BW_USER
+    echo "please enter bitwarden password"
+    read -s BW_PASSWORD
+    bw login $BW_USER $BW_PASSWORD
+    BW_SESSION="$(bw unlock $BW_PASSWORD --raw)"
+    mkdir -p ~/.config/sops/age
+    bw get attachment keys.txt --itemid ee6a90b0-4120-46f7-a1c6-9648316e43d5 --output ~/.config/sops/age/keys.txt
+  '';
+}

systems/x86_64-linux/drivebystation-nix/code-server.nix

@@ -0,0 +1,17 @@
+{ ... }:
+
+{
+  services.code-server = {
+    enable = true;
+    user = "andreas";
+    group = "users";
+    host = "0.0.0.0";
+    port = 1337;
+    auth = "password";
+    hashedPassword = "$argon2i$v=19$m=4096,t=3,p=1$Njl5em15cVdqMVluSWJneWp4OUhObGgxZ0tnPQ$1AAVNLuuKv5qyno40QAxFVPeAydY+8XkEVovKYrkJN0";
+    disableTelemetry = true;
+    disableUpdateCheck = true;
+  };
+
+  networking.firewall.allowedTCPPorts = [ 1337 ];
+}

systems/x86_64-linux/drivebystation-nix/configuration.nix

@@ -2,16 +2,23 @@
 # your system.  Help is available in the configuration.nix(5) man page
 # and in the NixOS manual (accessible by running ‘nixos-help’).
 
-{ config, pkgs, ... }:
+{ 
+  # config,
+  pkgs, 
+  ... 
+  }:
 
 {
-  imports =
+  imports = [
-    [ 
+    ./code-server.nix
+    ./tigervnc.nix
     ./hardware/hardware-configuration.nix
+    ./hardware/realtek-r8125.nix
   ];
 
+
   # Bootloader.
-  boot.loader.systemd-boot.enable = true;
+  # boot.loader.systemd-boot.enable = true; # managed by lanzaboote
   boot.loader.efi.canTouchEfiVariables = true;
   nix.settings.experimental-features = [ "nix-command" "flakes" ];
   networking.hostName = "drivebystation-nix"; # Define your hostname.
@@ -41,30 +48,65 @@
     LC_TELEPHONE = "nl_NL.UTF-8";
     LC_TIME = "nl_NL.UTF-8";
   };
+  system.activationScripts."stremio-mpv-flatpak-patch" = {
+      text = ''
+        # 1. Provide the symlink where Stremio's player engine queries
+        mkdir -p /usr/bin
+        ln -sf /run/current-system/sw/bin/mpv /usr/bin/mpv
 
-  # Enable the X11 windowing system.
+        # 2. Locate and patch the runtime server.js file inside the active Flatpak installation
-  services.xserver.enable = true;
+        TARGET_FILE="/var/lib/flatpak/app/com.stremio.Stremio/current/active/files/opt/stremio/server.js"
         
-  # Enable the GNOME Desktop Environment.
+        if [ -f "$TARGET_FILE" ]; then
-  services.xserver.displayManager.gdm.enable = true; 
+          # Make sure the file is writable momentarily for the patch
-  services.xserver.displayManager.defaultSession = "gnome";
+          chmod +w "$TARGET_FILE"
-  # services.xserver.displayManager.lightdm.enable = true;
+          
-  # services.xserver.displayManager.autoLogin.enable = true;
+          # Inject the flatpak-spawn sequence into the linux player profile
+          sed -i 's|linux:{path:\["\/usr\/bin\/mpv"\]|linux:{path:["/usr/bin/flatpak-spawn"],args:["--host","/usr/bin/mpv"]|g' "$TARGET_FILE"
+          sed -i 's|linux:{path:\["mpv"\]|linux:{path:["/usr/bin/flatpak-spawn"],args:["--host","/usr/bin/mpv"]|g' "$TARGET_FILE"
+          
+          # Restore permissions
+          chmod -w "$TARGET_FILE"
+        fi
+      '';
+    };
+  services = {
+    # Enable Gnome Session
+    displayManager.gdm.enable = true;
+    displayManager.sddm.enable = false;
+    # displayManager.sddm.wayland.enable = true;
+    displayManager.autoLogin = {
+      enable = false;
+      user = "andreas";
+    };
+
+    displayManager.cosmic-greeter.enable = false;
+    displayManager.defaultSession = "gnome";
+    # Clear the sandbox restriction dynamically
+    
+    xserver = {
+      enable = true; # Enable the deprecated X11 teletype terminal connection system. 
+      # Configure Display Manager
+      displayManager = {
+        lightdm.enable = false;
+      };
+      # Configure keymap in X11
+      xkb = {
+        layout = "us";
+        variant = "intl";
+      };
+      
+      # Specify first device section to use nvidia GPU
+
+    };
+  };
+  # services.xserver.displayManager.defaultSession = "gnome-x11";  # services.xserver.displayManager.autoLogin.enable = true;
   # services.xserver.displayManager.autoLogin.user = "andreas";
   # systemd.services."getty@tty1".enable = false;
   # systemd.services."autovt@tty1".enable = false;
 
-  services.xserver.desktopManager.gnome.enable = true;
-  services.desktopManager.plasma6.enable = true;
-
   programs.ssh.askPassword = "${pkgs.x11_ssh_askpass}/libexec/x11-ssh-askpass";
 
-  # Configure keymap in X11
-  services.xserver.xkb = {
-    layout = "us";
-    variant = "intl";
-  };
-
   # Configure console keymap
   console.keyMap = "us-acentos";
 
@@ -72,7 +114,7 @@
   services.printing.enable = true;
 
   # Enable sound with pipewire.
-  hardware.pulseaudio.enable = false;
+  services.pulseaudio.enable = false;
   security.rtkit.enable = true;
   services.pipewire = {
     enable = true;
@@ -80,30 +122,97 @@
     alsa.support32Bit = true;
     pulse.enable = true;
     # If you want to use JACK applications, uncomment this
-    #jack.enable = true;
+    jack.enable = true;
 
     # use the example session manager (no others are packaged yet so this is enabled by default,
     # no need to redefine it in your config for now)
     #media-session.enable = true;
   };
 
+  # Enable gamemode for game optimization
+  programs.gamemode.enable = true;
+
   # Enable touchpad support (enabled default in most desktopManager).
   # services.xserver.libinput.enable = true;
 
   # Install firefox.
   programs.firefox.enable = true;
 
+  # Enable XWayland for X11 application compatibility
+  programs.xwayland.enable = true;
+
+  # docker
+  virtualisation.docker = {
+    enable = true;
+  };
+
+
   # Allow unfree packages
   nixpkgs.config.allowUnfree = true;
 
+  # Enable --Akonadi--/ kde-pim for calendar backend
+  programs.kde-pim.enable = true;
+  services.dbus.enable = true;
+
   # List packages installed in system profile. To search, run:
   # $ nix search wget
   environment.systemPackages = with pkgs; [
     #  vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
     #  wget
-    pkgs.gnome-tweaks
+    (python3.withPackages (ps: with ps; [ websockets ]))
+    sqlite
+    javaPackages.compiler.openjdk25
+    javaPackages.compiler.openjdk21
+    qt6.qtwebengine
+    qemu
+    mpv
+    krita
+    ntfs3g
+    htop
+    rivalcfg
+    blender
+    freecad
+    reaper
+    discord
+    betterdiscordctl
   ];
+  environment.etc."xdg/autostart/xwaylandvideobridge.desktop".text = ''
+    [Desktop Entry]
+    Hidden=true
+  '';
 
+  services.udisks2.settings = { # Should fix mounting ntfs system partition - Did not work
+    "udisks2.conf" = {
+      defaults = {
+        allow_mount_internal = true;
+        allow_mount_system = true;
+      };
+    };
+  };
+
+  services.gvfs.enable = true; # For file manager integration
+
+  # Enable udev rules for SteelSeries devices (rivalcfg)
+  services.udev.packages = [ pkgs.rivalcfg ];
+
+  # Disable iBus (not needed unless using Asian input methods)
+  i18n.inputMethod = {
+    enable = false;
+  };
+
+  virtualisation.libvirtd = {
+    enable = true;
+    qemu = {
+      package = pkgs.qemu;
+      runAsRoot = true;
+      swtpm.enable = true;
+      vhostUserPackages = [ pkgs.virtiofsd ];
+    };
+  };
+
+
+
+  systemd.tmpfiles.rules = [ "L+ /var/lib/qemu/firmware - - - - ${pkgs.qemu}/share/qemu/firmware" ];
   # Some programs need SUID wrappers, can be configured further or are
   # started in user sessions.
   # programs.mtr.enable = true;
@@ -115,13 +224,88 @@
   # List services that you want to enable:
 
   # Enable the OpenSSH daemon.
-  # services.openssh.enable = true;
+  services.openssh.enable = true;
 
-  # Open ports in the firewall.
+  # Open ports in the .
-  # networking.firewall.allowedTCPPorts = [ ... ];
+  networking.firewall.allowedTCPPorts = [
-  # networking.firewall.allowedUDPPorts = [ ... ];
+    24800 #Synergy
-  # Or disable the firewall altogether.
+    53317 #localsend
-  # networking.firewall.enable = false;
+    3390 #rdp
+    9090
+    8000
+    40122
+  ];
+  networking.firewall.allowedUDPPorts = [
+    24800 #Synergy
+    53317 #localsend
+    3390 #rdp
+    9090
+    8000
+    40122
+  ];
+  networking.firewall.trustedInterfaces = [ "virbr0" ];
+  networking.nat = {
+    enable = true;
+    internalInterfaces = [ "virbr0" ];
+    externalInterface = "enp75s0";
+    extraCommands = ''
+      # MASQUERADE forwarded traffic to VM so it knows how to route back
+      iptables -t nat -A nixos-nat-post -o virbr0 -j MASQUERADE
+    '';
+    forwardPorts = [
+      {
+        sourcePort = 9090;
+        proto = "tcp";
+        destination = "192.168.122.113:9090";
+      }
+      {
+        sourcePort = 9090;
+        proto = "udp";
+        destination = "192.168.122.113:9090";
+      }
+    ];
+  };
+
+  services.mullvad-vpn = {
+    enable = true;
+    package = pkgs.mullvad-vpn;
+  };
+
+  fonts = {
+
+    packages = with pkgs; [
+      noto-fonts
+      noto-fonts-color-emoji
+    ];
+
+    fontconfig = {
+      enable = true;
+
+      defaultFonts = {
+        sansSerif = [ "DejaVu Sans" "Noto Color Emoji" ];
+        serif = [ "DejaVu Serif" "Noto Color Emoji" ];
+        monospace = [ "DejaVu Sans Mono" "Noto Color Emoji" ];
+        emoji = [ "Noto Color Emoji" ];
+      };
+    };
+  };
+  
+  # services.xrdp = {
+  #   enable = true;
+  #   openFirewall = true;
+  #   defaultWindowManager = "cinnamon-session";
+  # };
+  
+  ### tigervnc
+  services.tigervnc = {
+    enable = false;
+    users = {
+      andreas = {
+        localhost = false;  # true for SSH-only
+      };
+    };
+  };
+  ### tigervnc END
 
   # This value determines the NixOS release from which the default
   # settings for stateful data, like file locations and database versions
@@ -129,6 +313,6 @@
   # this value at the release version of the first install of this system.
   # Before changing this value read the documentation for this option
   # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
-  system.stateVersion = "24.05"; # Did you read the comment?
+  system.stateVersion = "26.05"; # Did you read the comment?
 
 }

systems/x86_64-linux/drivebystation-nix/default.nix

@@ -10,107 +10,205 @@
   inputs, 
   # Additional metadata is provided by Snowfall Lib.
   # The namespace used for your flake, defaulting to "internal" if not set.
-  namespace, 
+  # namespace, 
   # The system architecture for this host (eg. `x86_64-linux`).
-  system, 
+  # system, 
   # The Snowfall Lib target for this system (eg. `x86_64-iso`).
-  target, 
+  # target, 
   # A normalized name for the system target (eg. `iso`).
-  format, 
+  # format, 
   # A boolean to determine whether this system is a virtual target using nixos-generators.
-  virtual, 
+  # virtual, 
   # An attribute map of your defined hosts.
-  systems, 
+  # systems, 
   # All other arguments come from the system system.
-  config
+  # config,
-, ...
+  ...
 }:
 let
-  inherit (lib.my-namespace) enabled;
+  # inherit (lib.my-namespace) systemPackages;
   inherit pkgs;
   installedPackages = lib.my-namespace.mkPackages pkgs;
+  # Explicit application exceptions; all other packages use stable pkgs.
+  unstablePkgs = import inputs.nixpkgs-unstable {
+    system = pkgs.stdenv.hostPlatform.system;
+    config.allowUnfree = true;
+  };
 in
 {
   # inherit system;
   imports = [
     ./configuration.nix
-    ./steam.nix
+    ./mutter-tearing.nix
     ./video.nix
+    inputs.wallpaperengine.nixosModules.default
+    inputs.aagl.nixosModules.default
   ];
   config = {
-      system.stateVersion = "24.05";
+      programs.linux-wallpaperengine.enable = true;
+      system.stateVersion = "26.05";
       nix.settings.experimental-features = [ "nix-command" "flakes" ];
+      # Distrobox
+      my-namespace.distrobox.enable = true;
+      # Desktops
+      my-namespace.desktop-environment.cinnamon.enable = true;
+      my-namespace.desktop-environment.xfce.enable = false;
+      my-namespace.desktop-environment.gnome.enable = true;
+      my-namespace.desktop-environment.kde.enable = false;
+      my-namespace.desktop-environment.hyprland.enable = false;
+      my-namespace.desktop-environment.cosmic.enable = false;
+      my-namespace.performance-tuning.enable = true;
+      my-namespace.rtl8125-recovery.enable = true;
+      my-namespace.file-organization.enable = true;
+      # GNOME-keyring
+      my-namespace.gnome-keyring.enable = true;
+      # CS Tools
+      my-namespace.cs-tools.enable = true;
+      
       # Define a user account. Don't forget to set a password with ‘passwd’.
       users.users.andreas = {
         isNormalUser = true;
         description = "Andreas Schaafsma";
-        extraGroups = [ "networkmanager" "wheel" ]    ;
+        extraGroups = [ 
+          "networkmanager" 
+          "wheel" 
+          "libvirtd" 
+          "plugdev" 
+          "docker" 
+          "gamemode"
+        ];
         packages = with pkgs; [
-          # Packages from inputs
+          # Packages from inputsq
-          inputs.game-of-life.packages.x86_64-linux.default
+          # inputs.game-of-life.packages.x86_64-linux.default
           inputs.zen-browser.packages.x86_64-linux.default
-          inputs.nixos-cosmic
+          # inputs.anikki.packages.x86_64-linux.default
-
+          # We want flatpak support
           flatpak
-          gnome-software
+          # GNOME shit
-          gnomeExtensions.pop-shell
+          thunderbird
           soundwireserver
-          vscode  
+          # vscode 
+          #  discord 
           spotify
           appimage-run  
-          minecraft
+          prismlauncher #replaces broken minecraft package
-          trilium-desktop
+          unstablePkgs.trilium-desktop
           terraform
+          virt-manager
+          nil
+          codex
+          inputs.codex-desktop.packages.${pkgs.stdenv.hostPlatform.system}.codex-desktop
           #  thunderbird
         ];
+        
       };
 
-      my-namespace.cosmic-desktop.enable = false;
+      programs.appimage = {
+        enable = true;
+        binfmt = true;
+      };
+
+
+      programs.anime-game-launcher.enable = true; # Adds launcher and /etc/hosts rules
+      programs.anime-games-launcher.enable = true;
+
+      services.gnome.gnome-remote-desktop.enable = true;
+      my-namespace.keychron-keyboard.enable = true;
+
       # lib.my-namespace.home.stream-tools.enable = true;
 
       # Open ports in the firewall.
       networking.firewall.allowedTCPPorts = [
         59010 #SoundWireServer
+        5901
+        5001
+        11434
         3389 #RDP
+        22 #ssh
       ];
       networking.firewall.allowedUDPPorts = [
         59010 #SoundWireServer
+        5901
+        5001
+        11434
         3389 #RDP
+        22 #ssh
       ];
       # Or disable the firewall altogether.
-      # networking.firewall.enable = false;
+      networking.firewall.enable = false;
 
 
       # Install firefox.
       programs.firefox.enable = true;
       nixpkgs.config.allowBroken = true;
+      powerManagement.cpuFreqGovernor = "performance";
       # Set up system Packages
+      environment.sessionVariables.GI_TYPELIB_PATH =
+      lib.makeSearchPath "lib/girepository-1.0" [
+        pkgs.my-namespace.rounded-blur
+      ];
+      environment.sessionVariables = {
+        # If you are using Hyprland, labwc, or Sway (wlroots-based):
+        WLR_DRM_NO_ATOMIC = "1"; 
+
+        KWIN_DRM_DISABLE_TRIPLE_BUFFERING="1";
+
+        # If you are using KDE Plasma (KWin):
+        KWIN_FORCE_SW_CURSOR = "1";
+        
+        # For modern wlroots (and Aquamarine in Hyprland) to force software cursors:
+        WLR_NO_HARDWARE_CURSORS = "1"; 
+      };
       environment.systemPackages = with pkgs; [
         git
         wine
-        bottles
+        # bottles
         gparted
         ntfs3g 
         ntfsprogs
         synergy
+        mangohud
         my-namespace.udev-steelseries
-        my-namespace.hello
+        my-namespace.linux-wallpaperengine
-        # stuff I installed to try to get gamescope to work to no avail Gamescope is just broken it seems.
+        my-namespace.rounded-blur
-          # pkgs.mesa
+        my-namespace.rounded-windows-bms
-          # pkgs.vulkan-loader
+        my-namespace.cs-demo-manager
-          # pkgs.vulkan-validation-layers
+        vscode-modernized
-          # pkgs.vulkan-extension-layer
+        zed-editor
-          # pkgs.vulkan-tools
+        unstablePkgs.jetbrains-toolbox
-          # pkgs.libva
+
-          # pkgs.libva-utils
+        (pkgs.writeShellScriptBin "switch-to-desktop" ''
+          #!/bin/sh
+          # Kill Steam and return to display manager
+          pkill steam || true
+          pkill gamescope || true
+          # End the session cleanly
+          loginctl terminate-session "$XDG_SESSION_ID"
+        '')
+        
+        (pkgs.writeShellScriptBin "steamos-session-select" ''
+          #!/bin/sh
+          exec switch-to-desktop
+        '')
+
+        # Vulkan packages for Steam
+        mesa
+        vulkan-loader
+        vulkan-validation-layers
+        vulkan-extension-layer
+        vulkan-tools
+        libva
+        libva-utils
         #  vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
         #  wget
       ]
       ++  installedPackages.packages;
+
       programs.nix-ld = {
         enable = true;
-        package = pkgs.nix-ld-rs;
+        package = pkgs.nix-ld; #replaces nix-ld-rs
       };
+
       services.flatpak.enable = true;
       systemd.services.flatpak-repo = {
         wantedBy = [ "multi-user.target" ];
@@ -131,14 +229,17 @@ in
 
       # services.xrdp.enable = true;
       # services.xrdp.defaultWindowManager = "${pkgs.gnome-session}/bin/gnome-session";
+      # services.xrdp.defaultWindowManager = "startxfce4";
       # services.xrdp.openFirewall = true;
+      # services.xrdp.audio.enable = false;
 
 
       # Disable the GNOME3/GDM auto-suspend feature that cannot be disabled in GUI!
       # If no user is logged in, the machine will power down after 20 minutes.
-      systemd.targets.sleep.enable = true;
+
-      systemd.targets.suspend.enable = true;
+      # systemd.targets.sleep.enable = false;
-      systemd.targets.hibernate.enable = true;
+      # systemd.targets.suspend.enable = false;
-      systemd.targets.hybrid-sleep.enable = true;
+      # systemd.targets.hibernate.enable = false;
+      # systemd.targets.hybrid-sleep.enable = false;
     };
 }

systems/x86_64-linux/drivebystation-nix/hardware/acer-monitor-edid.nix

@@ -1,6 +1,10 @@
 { config, lib, pkgs, ... }:
 {
-  boot.kernelParams = [ "drm.edid_firmware=DP-6:edid/edid.bin" ];
+  # boot.kernelParams = [ "drm.edid_firmware=DP-1:edid/edid.bin,DP-2:edid/edid.bin,DP-3:edid/edid.bin,DP-4:edid/edid.bin" ];
+  boot.kernelParams = [ 
+    "drm.edid_firmware=DP-2:edid/edid.bin,DP-4:edid/edid.bin" 
+  ];
+
 
   hardware.firmware = [
   (

systems/x86_64-linux/drivebystation-nix/hardware/graphics/intel.nix

@@ -0,0 +1,141 @@
+{ config, lib, pkgs, ... }:
+
+{
+  ############################
+  ## Display + Mesa Settings
+  ############################
+
+  # hardware.enableRedistributableFirmware = true;
+
+  hardware.firmware = [
+    pkgs.linux-firmware
+    # pkgs.firmwareLinuxNonfree
+    # pkgs.firmwareLinuxStrict
+    # pkgs.firmwareLinuxLatest
+  ];
+
+  # boot.kernelPackages = pkgs.linuxPackages_latest;
+  boot.kernelParams = [
+    "console=tty0"
+    # "efifb=off"
+    "xe.force_probe=e20b"
+    # Xe stability improvements for B580
+    "xe.guc_log_level=0"           # Reduce GuC logging overhead
+    "xe.enable_display=1"          # Ensure display is enabled
+    # Memory/performance parameters
+    "mitigations=off"              # Disable CPU mitigations for better performance
+    "module_blacklist=nouveau,nvidia,nvidia_drm,nvidia_modeset,nvidia_uvm"
+  ];
+  services.switcherooControl.enable = true;
+  # environment.variables.VK_ICD_FILENAMES = "/run/opengl-driver/share/vulkan/icd.d/intel_icd.x86_64.json";
+  hardware.intel-gpu-tools.enable = true;
+  hardware.graphics = {
+    enable = true;
+    enable32Bit = true;
+
+    extraPackages = with pkgs; [
+      intel-media-driver     # Intel VAAPI
+      vpl-gpu-rt             # oneVPL runtime
+      intel-vaapi-driver     # fallback
+      intel-compute-runtime # OpenCL/Level Zero
+      level-zero            # Level Zero API for compute
+      intel-graphics-compiler # Shader compiler for Arc GPUs allgedly needed for XPU
+    ];
+  };
+
+  # Ensure Arc driver is available (usually auto-loaded)
+  boot.kernelModules = [ "xe" "i915" ];
+  # Blacklist everything for nvidia
+  boot.blacklistedKernelModules = [
+    "nouveau"
+    "nvidia"
+    "nvidia_drm"
+    "nvidia_modeset"
+    "nvidia_uvm"
+  ];
+
+  # Mark Arc B580 as a discrete Intel GPU for switcheroo-control and
+  # keep runtime PCI power management enabled for the device.
+  services.udev.extraRules = ''
+    ACTION=="add|bind", SUBSYSTEM=="pci", ATTR{vendor}=="0x8086", ATTR{device}=="0xe20b", TEST=="power/control", ATTR{power/control}="auto"
+    SUBSYSTEM=="drm", DRIVERS=="xe", ATTRS{vendor}=="0x8086", ATTRS{device}=="0xe20b", TAG+="switcheroo-discrete-gpu"
+  '';
+
+  environment.variables = {
+    # Force Intel GPU for all graphics operations
+    KWIN_DRM_DEVICES = "/dev/dri/card0";
+    
+    # Vulkan/DXVK optimizations for B580
+    ANV_ENABLE_PIPELINE_CACHE = "1";
+    
+    # Shader cache settings
+    MESA_SHADER_CACHE_DISABLE = "false";
+    MESA_SHADER_CACHE_MAX_SIZE = "10G";
+    
+    # DXVK optimizations
+    DXVK_HUD = "compiler";  # Monitor shader compilation
+    # DXVK_ASYNC = "1";     # Enable if you want async shader compilation (may cause issues)
+    
+    # Intel IPEX / PyTorch settings
+    ZE_ENABLE_ALT_DRIVERS = "libze_intel_gpu.so.1";  # Enable Intel GPU driver for Level Zero
+    SYCL_CACHE_PERSISTENT = "1";                      # Enable persistent SYCL cache
+    SYCL_PI_LEVEL_ZERO_USE_IMMEDIATE_COMMANDLISTS = "1";  # Performance optimization
+  };
+
+
+  ############################
+  ## LACT Settings for Overclocking
+  ############################
+
+  services.lact.enable = true;
+
+
+
+  ############################
+  ## X / Wayland GPU Drivers
+  ############################
+  
+  # Enable modesetting driver for X11 (required for Intel Xe)
+  services.xserver.videoDrivers = [ 
+    "modesetting"
+    #"intel"
+  ];
+
+  services.xserver.enable = true;
+  services.xserver.autorun = false;
+  services.xserver.displayManager.startx.enable = true;
+
+  # Xorg configuration for Intel Arc Battlemage (xe driver)
+  # Based on: https://www.reddit.com/r/crtgaming/comments/1knom2t/guide_intel_arc_b580_arch_linux_xorg/
+  # Intel Arc B-series at PCI 0000:03:00.0
+  #services.xserver.deviceSection = ''
+  #  Option "AccelMethod" "glamor"
+  #  BusID "PCI:3:0:0"
+  #'';
+
+  ############################
+  ## User Access
+  ############################
+  users.users.andreas.extraGroups = [ "video" "render" ];
+  
+  ############################
+  ## System Packages for AI/ML
+  ############################
+  environment.systemPackages = with pkgs; [
+    intel-compute-runtime
+    level-zero
+    # For checking GPU compute capabilities
+    clinfo
+    vulkan-tools
+  ];
+  services.xserver.config = ''
+    Section "Device"
+      Identifier "AMD"
+      Driver "amdgpu"
+      Option "TearFree" "false"
+    EndSection
+  '';
+  services.xserver.deviceSection = ''
+    Option "TearFree" "false"
+  '';
+}

systems/x86_64-linux/drivebystation-nix/hardware/graphics/intel_i915.nix

@@ -0,0 +1,90 @@
+{ config, lib, pkgs, ... }:
+
+{
+  ############################
+  ## Display + Mesa Settings
+  ############################
+
+  # hardware.enableRedistributableFirmware = true;
+
+  hardware.firmware = [
+    pkgs.linux-firmware
+    # pkgs.firmwareLinuxNonfree
+    # pkgs.firmwareLinuxStrict
+    # pkgs.firmwareLinuxLatest
+  ];
+
+  # boot.kernelPackages = pkgs.linuxPackages_latest;
+  boot.kernelParams = [
+    "console=tty0"
+    # "efifb=off"
+    # "xe.force_probe=*"
+    "module_blacklist=nouveau,nvidia,nvidia_drm,nvidia_modeset,nvidia_uvm"
+  ];
+
+  # environment.variables.VK_ICD_FILENAMES = "/run/opengl-driver/share/vulkan/icd.d/intel_icd.x86_64.json";
+  hardware.intel-gpu-tools.enable = true;
+  hardware.graphics = {
+    enable = true;
+    enable32Bit = true;
+
+    extraPackages = with pkgs; [
+      intel-media-driver     # Intel VAAPI
+      vpl-gpu-rt             # oneVPL runtime
+      intel-vaapi-driver     # fallback
+      intel-compute-runtime # OpenCL/Level Zero
+    ];
+  };
+
+  # Ensure Arc driver is available (usually auto-loaded)
+  boot.kernelModules = [ "i915" ];
+  # Blacklist everything for nvidia
+  boot.blacklistedKernelModules = [
+    "nouveau"
+    "nvidia"
+    "nvidia_drm"
+    "nvidia_modeset"
+    "nvidia_uvm"
+    "xe"
+  ];
+
+  environment.variables = {
+    KWIN_DRM_DEVICES = "/dev/dri/card0";
+  };
+
+
+  ############################
+  ## LACT Settings for Overclocking
+  ############################
+
+  services.lact.enable = true;
+
+
+
+  ############################
+  ## X / Wayland GPU Drivers
+  ############################
+  
+  # Enable modesetting driver for X11 (required for Intel Xe)
+  services.xserver.videoDrivers = [ 
+    "modesetting"
+    #"intel"
+  ];
+
+  services.xserver.enable = true;
+  services.xserver.autorun = false;
+  services.xserver.displayManager.startx.enable = true;
+
+  # Xorg configuration for Intel Arc Battlemage (xe driver)
+  # Based on: https://www.reddit.com/r/crtgaming/comments/1knom2t/guide_intel_arc_b580_arch_linux_xorg/
+  # Intel Arc B-series at PCI 0000:03:00.0
+  #services.xserver.deviceSection = ''
+  #  Option "AccelMethod" "glamor"
+  #  BusID "PCI:3:0:0"
+  #'';
+
+  ############################
+  ## User Access
+  ############################
+  users.users.andreas.extraGroups = [ "video" "render" ];
+}

systems/x86_64-linux/drivebystation-nix/hardware/graphics/intel_nvidia.nix

@@ -0,0 +1,74 @@
+{ config, lib, pkgs, ... }:
+
+{
+  ############################
+  ## Display + Mesa Settings
+  ############################
+
+  # hardware.enableRedistributableFirmware = true;
+
+  hardware.firmware = [
+    pkgs.linux-firmware
+    # pkgs.firmwareLinuxNonfree
+    # pkgs.firmwareLinuxStrict
+    # pkgs.firmwareLinuxLatest
+  ];
+
+  # boot.kernelPackages = pkgs.linuxPackages_latest;
+
+  boot.kernelParams = [
+    "console=tty0"
+    "efifb=off"
+    "xe.force_probe=*"
+    "nvidia-drm.modeset=1"
+  ];
+
+  hardware.graphics = {
+    enable = true;
+
+    extraPackages = with pkgs; [
+      intel-media-driver     # Intel VAAPI
+      vpl-gpu-rt             # oneVPL runtime
+      intel-vaapi-driver     # fallback
+    ];
+  };
+
+  # Ensure Arc driver is available (usually auto-loaded)
+  boot.kernelModules = [ "xe" ];
+  boot.blacklistedKernelModules = [ "nouveau" ];
+
+  ############################
+  ## X / Wayland GPU Drivers
+  ############################
+  # Only specify NVIDIA. Intel Arc uses the modesetting driver automatically.
+  services.xserver.videoDrivers = [ "nvidia" ];
+
+  ############################
+  ## NVIDIA Configuration
+  ############################
+  hardware.nvidia = {
+    modesetting.enable = true;   # REQUIRED if any displays are on NVIDIA
+
+    open = false;                # GTX 1070 → must be the proprietary driver
+    nvidiaSettings = true;
+
+    powerManagement.enable = false;
+    powerManagement.finegrained = false;
+
+    prime = {
+      offload.enable = false;    # not a laptop, must be disabled
+      sync.enable = false;
+    };
+
+    # Correct way to pick the driver
+    package = config.boot.kernelPackages.nvidiaPackages.production;
+  };
+
+  # Remove → hardware.nvidia handles module packages
+  # boot.extraModulePackages = [ config.boot.kernelPackages.nvidia_x11 ];
+
+  ############################
+  ## User Access
+  ############################
+  users.users.andreas.extraGroups = [ "video" "render" ];
+}

systems/x86_64-linux/drivebystation-nix/hardware/graphics/nvidia-stable.nix

@@ -1,10 +0,0 @@
-{ config, lib, pkgs, ... }:
-let
-  inherit (lib.my-namespace) enabled;
-in
-{
-  my-namespace.hardware = {
-    # graphics-nvidia-prime-amd = enabled;
-    graphics-nvidia-prime-amd-testing = enabled;
-  };
-}

systems/x86_64-linux/drivebystation-nix/hardware/graphics/nvidia.nix

@@ -1,126 +0,0 @@
-{ config, lib, pkgs, ... }:
-{
-
-  # Enable OpenGL
-  hardware.graphics = {
-    enable = true;  
-    extraPackages = with pkgs; [ nvidia-vaapi-driver ];
-  };
-
-  # Load nvidia driver for Xorg and Wayland
-  # boot.extraModulePackages = [ config.boot.kernelPackages.nvidia_x11 ];
-  boot.extraModulePackages = [ config.boot.kernelPackages.nvidia_x11_beta ];
-  # boot.extraModulePackages = [ config.boot.kernelPackages.nvidia_x11 ];
-
-
-  boot.loader.systemd-boot.consoleMode = "max";
-
-  boot.kernelParams = [
-    "amdgpu.modeset=1"
-    "nvidia-drm.fbdev=1"
-    "nvidia-drm.modeset=0"
-  #  "nvidia.NVreg_PreserveVideoMemoryAllocations=0"
-    "amd_iommu=on"
-    # "vfio-pci.ids=\"10de:2489,10de:228b\""
-    # "nomodeset"
-  #  "nvidia_drm.modeset=1"
-  ];
-  boot.blacklistedKernelModules = [ 
-    "i915" 
-    "nouveau"
-    # "nvidia"
-    # "nvidia-drm"
-    # "nvidia-uvm"
-    # "nvidiafb"
-    # "nvidia_drm"
-    # "nvidia_modeset"
-  ];
-  # boot.extraModprobeConfig = ''
-    # blacklist nvidia
-    # blacklist nvidia-drm
-    # blacklist nvidia_drm
-    # blacklist nvidia-uvm
-    # blacklist nvidia_uvm
-    # blacklist nvidia_modeset
-    # blacklist nvidiafb
-    # blacklist nouveau
-    # options nouveau modeset=0
-  # '';
-  boot.extraModprobeConfig = ''
-    blacklist nouveau
-    options nouveau modeset=0
-  '';
-  # services.xserver.videoDrivers = [ "nvidia" ];
-  services.xserver.videoDrivers = [ "amdgpu" "nvidia" ];
-
-  # services.udev.extraRules = ''
-  #   # Remove NVIDIA USB xHCI Host Controller devices, if present
-  #   ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x0c0330", ATTR{power/control}="auto", ATTR{remove}="1"
-  #   # Remove NVIDIA USB Type-C UCSI devices, if present
-  #   ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x0c8000", ATTR{power/control}="auto", ATTR{remove}="1"
-  #   # Remove NVIDIA Audio devices, if present
-  #   ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x040300", ATTR{power/control}="auto", ATTR{remove}="1"
-  #   # Remove NVIDIA VGA/3D controller devices
-  #   ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x03[0-9]*", ATTR{power/control}="auto", ATTR{remove}="1"
-  # '';
-
-  boot.initrd.kernelModules = [ 
-    "amdgpu"
-    "nvidia"  
-    # "nvidia-drm"
-    "nvidiafb"
-    # "nvidia-uvm"
-    # "nvidia-modeset"
-    # "i2c-nvidia_gpu"    
-  ];  
-  hardware.nvidia = {
-    # Modesetting is required.
-    modesetting.enable = true;
-
-    # Nvidia power management. Experimental, and can cause sleep/suspend to fail.
-    # Enable this if you have graphical corruption issues or application crashes after waking
-    # up from sleep. This fixes it by saving the entire VRAM memory to /tmp/ instead 
-    # of just the bare essentials.
-    powerManagement.enable = true;
-
-    # Fine-grained power management. Turns off GPU when not in use.
-    # Experimental and only works on modern Nvidia GPUs (Turing or newer).
-    powerManagement.finegrained = false;
-
-    # Use the NVidia open source kernel module (not to be confused with the
-    # independent third-party "nouveau" open source driver).
-    # Support is limited to the Turing and later architectures. Full list of 
-    # supported GPUs is at: 
-    # https://github.com/NVIDIA/open-gpu-kernel-modules#compatible-gpus 
-    # Only available from driver 515.43.04+
-    # Currently alpha-quality/buggy, so false is currently the recommended setting.
-    open = false;
-
-    # Enable the Nvidia settings menu,
-	  # accessible via `nvidia-settings`.
-    nvidiaSettings = true;
-
-    # Optionally, you may need to select the appropriate driver version for your specific GPU.
-    package = config.boot.kernelPackages.nvidiaPackages.beta;
-    # package = config.boot.kernelPackages.nvidiaPackages.none;
-    # package = config.boot.kernelPackages.nvidiaPackages.production;
-    
-    forceFullCompositionPipeline = false;
-
-    prime = {
-      offload = {
-        enable = true;
-        enableOffloadCmd = true;
-      };
-      reverseSync.enable = false;
-      # Make sure to use the correct Bus ID values for your system!
-      # intelBusId = "PCI:0:2:0";
-      nvidiaBusId = "PCI:01:0:0";
-      amdgpuBusId = "PCI:50:0:0"; #For AMD GPU
-    };
-
-  };
-  users.users.andreas = {
-   extraGroups = [ "video" "render" ];
-  };
-}

systems/x86_64-linux/drivebystation-nix/hardware/graphics/passthrough_nvidia.nix

@@ -0,0 +1,51 @@
+{ config, lib, system, pkgs, ... }:
+{
+  boot.kernelModules = [
+    "vfio"
+    "vfio-pci"
+    "vfio_iommu_type1"
+  ];
+  boot.kernelParams = [
+    "amd_iommu=on"
+    "iommu=pt"
+  ];
+  # Make sure vfio is available inside initrd
+  boot.initrd.availableKernelModules = [
+    "vfio_pci"
+  ];
+  # Bind by IDs (cleaner via modprobe instead of kernel param)
+  boot.extraModprobeConfig = ''
+    options vfio-pci ids=10de:1b81,10de:10f0
+  '';
+  boot.initrd.systemd = {
+    enable = true;
+    services.initrd-vfio-pci-nvidia = {
+      description = "vfio-pci predevice init";
+      wantedBy = [ "initrd.target" ];
+      # Match 'preDeviceCommands' by running early
+      before = [ "sysroot.mount" ]; 
+      
+      unitConfig.DefaultDependencies = "no";
+      serviceConfig.Type = "oneshot";
+      
+      # Place your original shell commands here
+      script = ''
+        modprobe vfio-pci
+      '';
+    };
+  };
+  # # EARLY and deterministic binding
+  # boot.initrd.preDeviceCommands = ''
+  #   echo 0000:05:00.0 > /sys/bus/pci/drivers/vfio-pci/bind
+  #   echo 0000:05:00.1 > /sys/bus/pci/drivers/vfio-pci/bind
+  # '';
+  environment.systemPackages = with pkgs; [
+    pciutils
+    virtiofsd
+    config.virtualisation.libvirtd.qemu.package
+    looking-glass-client
+    virt-manager
+    libguestfs-with-appliance
+  ];
+  users.extraUsers.andreas.extraGroups = [ "libvirtd" ];
+}

systems/x86_64-linux/drivebystation-nix/hardware/hardware-configuration.nix

@@ -7,30 +7,60 @@
   imports = 
     [ 
       (modulesPath + "/installer/scan/not-detected.nix")
-      ./graphics/nvidia-stable.nix  
+      ./graphics/intel.nix
+      ./graphics/passthrough_nvidia.nix
+      # ./graphics/intel_i915.nix
       # ./graphics/nvidia.nix
       ./acer-monitor-edid.nix
+      ./samsung-monitor-edid.nix
     ];
-  #boot.kernelPackages = pkgs.linuxPackages_latest;
+  hardware.enableRedistributableFirmware = true;
-  # boot.kernelPackages = pkgs.linuxKernel.packages.linux_xanmod_latest;
+  boot.loader.efi.canTouchEfiVariables = true;  
-  boot.kernelPackages = pkgs.linuxPackages;
-  
   boot.initrd.availableKernelModules = [ "xhci_pci" "ahci" "nvme" "usbhid" "usb_storage" "sd_mod" ];
-  boot.kernelModules = [ "kvm-amd" "4vl2loopback" ];
+  boot.kernelModules = [ "kvm-amd" "r8125" "4vl2loopback" ];
-  boot.extraModulePackages = [ pkgs.linuxPackages.v4l2loopback ];
+  boot.extraModulePackages = with config.boot.kernelPackages; [ v4l2loopback r8125 ];
+  boot.supportedFilesystems = [ "ntfs" ];
+  boot.blacklistedKernelModules = [ "r8169" ];
+
+
 
-  boot.blacklistedKernelModules = [ ];
   fileSystems."/" =
-    { device = "/dev/disk/by-uuid/563805a1-5277-4488-bbdd-c1a7ed37be76";
+    { device = "/dev/disk/by-uuid/31fe479a-f4ef-4ee5-9cd9-d43ed1a3c88b";
       fsType = "ext4";
     };
 
   fileSystems."/boot" =
-    { device = "/dev/disk/by-uuid/E846-D998";
+    { device = "/dev/disk/by-uuid/646A-D107";
       fsType = "vfat";
       options = [ "fmask=0077" "dmask=0077" ];
     };
 
+  fileSystems."/home" =
+    { device = "/dev/disk/by-uuid/6ac4f42b-09e3-43b3-8215-8ff9a3c0695e";
+      fsType = "ext4";
+    };
+
+  # Mount ntfs partition
+  # fileSystems."/run/media/627C3BDF7C3BAD23" = {
+  #   device = "/dev/disk/by-uuid/627C3BDF7C3BAD23";
+  #   fsType = "ntfs-3g";
+  #   options = [ "rw" "uid=1000"];
+  # };
+
+  # # Mount ntfs oldfiles drive partition
+  # fileSystems."/run/media/oldfiles" = {
+  #   device = "/dev/disk/by-uuid/E2E26FFFE26FD677";
+  #   fsType = "ntfs-3g";
+  #   options = [ "rw" "uid=1000"];
+  # };
+
+  # # Mount The Vault
+  # fileSystems."/run/media/vault" = {
+  #   device = "/dev/disk/by-uuid/3470646370642DB4";
+  #   fsType = "ntfs-3g";
+  #   options = [ "rw" "uid=1000"];
+  # };
+
 
 
   # Try to fix hibernation
@@ -39,10 +69,11 @@
   swapDevices = [ {
     device = "/var/lib/swapfile";
     size = 32*1024;
-  } ]; #resume-offset = 78399488
+  } ]; #resume-offset = 195323904
-  boot.resumeDevice = "/dev/disk/by-uuid/563805a1-5277-4488-bbdd-c1a7ed37be76";  # the unlocked drive mapping
+  boot.resumeDevice = "/dev/disk/by-uuid/31fe479a-f4ef-4ee5-9cd9-d43ed1a3c88b";  # the unlocked drive mapping
   boot.kernelParams = [
-    "resume_offset=78399488"  #sudo filefrag -v /var/lib/swapfile|awk 'NR==4{gsub(/\./,"");print $4;}'
+    "resume_offset=195323904"  #sudo filefrag -v /var/lib/swapfile|awk 'NR==4{gsub(/\./,"");print $4;}'
+    "r8125.aspm=0" # realtek network adapter fix
   ];
   security.protectKernelImage = false;
 

systems/x86_64-linux/drivebystation-nix/hardware/realtek-r8125.nix

@@ -0,0 +1,22 @@
+{ pkgs, ... }:
+
+{
+  # Keep the vendor driver tied to this host's selected kernel, including its
+  # build dependencies and module installation path supplied by nixpkgs.
+  boot.kernelPackages = pkgs.linuxPackages.extend (_final: prev: {
+    r8125 = prev.r8125.overrideAttrs {
+      version = "9.018.00";
+      # The mirror's top-level wrapper overrides BASEDIR with /lib/modules.
+      # Build in src directly so nixpkgs' kernel path reaches kbuild.
+      buildFlags = [ "-C" "src" "modules" ];
+      # Realtek's release mirrored by the DKMS maintainer. Pin the source rather
+      # than running the vendor installer or following a mutable branch.
+      src = pkgs.fetchFromGitHub {
+        owner = "awesometic";
+        repo = "realtek-r8125-dkms";
+        rev = "9a152bf920334aead090d2fb4d91f67a84923123"; # 9.018.00-1
+        hash = "sha256-yeQsyraNrms1Txm7ZAKeiPfF0tfN6WSHUo5DnvfFosw=";
+      };
+    };
+  });
+}

systems/x86_64-linux/drivebystation-nix/hardware/samsung-monitor-edid.nix

@@ -0,0 +1,14 @@
+{ config, lib, pkgs, ... }:
+{
+  # boot.kernelParams = [ "drm.edid_firmware=DP-1:edid/edid.bin,DP-2:edid/edid.bin,DP-3:edid/edid.bin,DP-4:edid/edid.bin" ];
+  boot.kernelParams = [ "drm.edid_firmware=DP-1:edid/edid2.bin" ];
+
+
+  hardware.firmware = [
+  (
+    pkgs.runCommand "edid2.bin" { } ''
+      mkdir -p $out/lib/firmware/edid
+      cp ${./firmware/U32J59x-edid.bin} $out/lib/firmware/edid/edid2.bin
+    ''
+  )];
+} 

systems/x86_64-linux/drivebystation-nix/mutter-50-tearing-compat.patch

@@ -0,0 +1,36 @@
+diff --git a/src/meson.build b/src/meson.build
+--- a/src/meson.build
++++ b/src/meson.build
+@@ -1077,5 +1077,6 @@ wayland_protocols = [
+   ['single-pixel-buffer', 'staging', 1, ],
+   ['tablet', 'stable', 2, ],
++  ['tearing-control', 'staging', 1, ],
+   ['text-input-unstable-v3', 'private', ],
+   ['viewporter', 'stable', ],
+   ['xdg-activation', 'staging', 1, ],
+diff --git a/src/wayland/meta-wayland-dma-buf.c b/src/wayland/meta-wayland-dma-buf.c
+--- a/src/wayland/meta-wayland-dma-buf.c
++++ b/src/wayland/meta-wayland-dma-buf.c
+@@ -630,11 +630,22 @@ has_modifier (GArray   *modifiers,
+ }
+ 
+ #ifdef HAVE_NATIVE_BACKEND
++static gboolean
++async_supports_modifier (MetaKmsPlane *plane,
++                         uint32_t      drm_format,
++                         uint64_t      drm_modifier)
++{
++  GArray *async_modifiers =
++    meta_kms_plane_get_async_modifiers_for_format (plane, drm_format);
++  return async_modifiers && has_modifier (async_modifiers, drm_modifier);
++}
++
+ static gboolean
+ crtc_supports_modifier (MetaCrtcKms *crtc_kms,
+                         uint32_t     drm_format,
+-                        uint64_t     drm_modifier)
++                        uint64_t     drm_modifier,
++                        gboolean     is_async)
+ {
+   MetaKmsPlane *plane = meta_crtc_kms_get_assigned_primary_plane (crtc_kms);
+   GArray *crtc_modifiers;

systems/x86_64-linux/drivebystation-nix/mutter-tearing.nix

@@ -0,0 +1,59 @@
+{ lib, pkgs, ... }:
+
+let
+  # GNOME/mutter!3797, pinned because the MR is still under development.
+  mutterTearingRevision = "a8d56d423edde9e6d76f6b9cab663d82c65cf1a2";
+  mutterTearingPatch = pkgs.fetchurl {
+    url = "https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3797.diff";
+    hash = "sha256-3up5PsHX+BSQRKb9JS5bnJLPaTGmvV55M18tKkepIng=";
+  };
+in
+{
+  nixpkgs.overlays = [
+    (final: prev: {
+      mutter = prev.mutter.overrideAttrs (old: {
+        pname = "mutter-tearing";
+
+        # nixpkgs leaves Mutter's verbose topics compiled out by default.
+        # This is required for MUTTER_DEBUG=kms to emit the async commit flags.
+        mesonFlags = (old.mesonFlags or [ ]) ++ [ ];
+
+        # The MR currently targets Mutter 51. Apply it to the packaged Mutter
+        # 50 source, then resolve the four small context conflicts separately.
+        prePatch = ''
+          ${old.prePatch or ""}
+
+          set +e
+          patch --batch -p1 --forward < ${mutterTearingPatch}
+          mr_status=$?
+          set -e
+
+          if [ "$mr_status" -ne 0 ]; then
+            reject_count="$(find . -name '*.rej' -type f | wc -l)"
+            if [ "$reject_count" -ne 3 ]; then
+              echo "Unexpected number of Mutter !3797 rejects: $reject_count" >&2
+              exit 1
+            fi
+          fi
+
+          patch --batch -p1 --forward < ${./mutter-50-tearing-compat.patch}
+          find . -name '*.rej' -type f -delete
+        '';
+
+        passthru = (old.passthru or { }) // {
+          tearingMr = 3797;
+          tearingRevision = mutterTearingRevision;
+        };
+      });
+    })
+  ];
+
+  environment.sessionVariables = {
+    # Mutter keeps tearing support behind an experimental runtime switch.
+    MUTTER_DEBUG_EXPERIMENTAL_FEATURES = lib.mkDefault "tearing";
+
+    # Temporarily expose whether async atomic commits reach KMS or fall back
+    # to synchronized presentation. Remove this after collecting the log.
+    # MUTTER_DEBUG = lib.mkDefault "kms";
+  };
+}

systems/x86_64-linux/drivebystation-nix/steam.nix

@@ -1,75 +0,0 @@
-{
-  # Snowfall Lib provides a customized `lib` instance with access to your flake's library
-  # as well as the libraries available from your flake's inputs.
-  lib, 
-  # An instance of `pkgs` with your overlays and packages applied is also available.
-  pkgs, 
-  # You also have access to your flake's inputs.
-  inputs, 
-  # Additional metadata is provided by Snowfall Lib.
-  # The namespace used for your flake, defaulting to "internal" if not set.
-  namespace, 
-  # The system architecture for this host (eg. `x86_64-linux`).
-  system, 
-  # The Snowfall Lib target for this system (eg. `x86_64-iso`).
-  target, 
-  # A normalized name for the system target (eg. `iso`).
-  format, 
-  # A boolean to determine whether this system is a virtual target using nixos-generators.
-  virtual, 
-  # An attribute map of your defined hosts.
-  systems, 
-  # All other arguments come from the system system.
-  config
-, ...
-}:{
-  config = {
-    # programs.gamescope = {
-    #   enable = true;
-    #   capSysNice = true;
-    # };
-    programs.steam = {
-      enable = true;
-      remotePlay.openFirewall = true; # Open ports in the firewall for Steam Remote Play
-      dedicatedServer.openFirewall = true; # Open ports in the firewall for Source Dedicated Server
-      localNetworkGameTransfers.openFirewall = true; # Open ports in the firewall for Steam Local Network Game Transfers
-
-    #   gamescopeSession = {
-    #     enable = true;
-    #     env = {
-    #       WLR_RENDERER = "vulkan";
-    #       DXVK_HDR = "0 ";
-    #       ENABLE_GAMESCOPE_WSI = "0";
-    #       WINE_FULLSCREEN_FSR = "1";
-    #       # Games allegedly prefer X11
-    #       SDL_VIDEODRIVER = "x11";
-    #     };
-    #     args = [
-    #       "--xwayland-count 1"
-    #       "--expose-wayland"
-
-    #       "-e" # Enable steam integration
-    #       "--steam"
-
-    #       # "--adaptive-sync"
-    #       # "--hdr-enabled"
-    #       # "--hdr-itm-enable"
-
-    #       # External monitor
-    #       "--prefer-output DP-3"
-    #       "--output-width 1920"
-    #       "--output-height 1080"
-    #       "-r 172"
-
-    #       # Laptop display
-    #       # "--prefer-output eDP-1"
-    #       # "--output-width 2560"
-    #       # "--output-height 1600"
-    #       # "-r 120"
-          
-    #       # "--prefer-vk-device 10de:1b81" # lspci -nn | grep VGA
-    #     ];
-    #   };
-    };
-  };
-}

systems/x86_64-linux/drivebystation-nix/tigervnc.nix

@@ -0,0 +1,83 @@
+{ config, pkgs, lib, ... }:
+
+let
+  cfg = config.services.tigervnc;
+in
+{
+  options.services.tigervnc = {
+    enable = lib.mkEnableOption "TigerVNC x0vncserver (mirrors :0)";
+    users = lib.mkOption {
+      type = lib.types.attrsOf (lib.types.submodule ({ name, config, ... }: {
+        options = {
+          enableSharing = lib.mkOption { type = lib.types.bool; default = true; };
+          port = lib.mkOption { type = lib.types.int; default = 5901; };
+          localhost = lib.mkOption { type = lib.types.bool; default = false; };
+          #geometry = lib.mkOption { type = lib.types.str; default = ""; };
+        };
+      }));
+      default = { };
+    };
+  };
+
+  config = lib.mkIf cfg.enable {
+    environment.systemPackages = [ pkgs.tigervnc pkgs.xhost pkgs.xauth ];
+
+    systemd.user.services = lib.mapAttrs' (user: opts:
+      let svcName = "tigervnc-x0vncserver-${user}";
+      in {
+        name = svcName;
+        value = lib.mkIf opts.enableSharing {
+          description = "TigerVNC x0vncserver sharing :0 for ${user}";
+          after = [ "graphical-session.target" ];
+          partOf = [ "graphical-session.target" ];
+          wantedBy = [ "graphical-session.target" ];
+
+          path = [ pkgs.tigervnc pkgs.xhost pkgs.xauth pkgs.coreutils ];
+
+          script = let
+            # Build args array to avoid shell escaping hell
+            vncArgs = [
+              "-display :0"
+              "-rfbport ${toString opts.port}"
+              "-rfbauth $HOME/.vnc/passwd"
+              "-AcceptSetDesktopSize=0"
+              "-AlwaysShared"
+            ] #++ lib.optionals (opts.geometry != "") [ "-Geometry ${opts.geometry}" ]
+              ++ lib.optionals opts.localhost [ "-localhost" ];
+          in ''
+            set -euxo pipefail
+
+            # Password check
+            mkdir -p "$HOME/.vnc"
+            if [ ! -r "$HOME/.vnc/passwd" ]; then
+              echo "ERROR: Run: vncpasswd ~/.vnc/passwd" >&2
+### CHANGE THE > in the above line TO A GREATER THAN SIGN! ###
+              exit 1
+            fi
+
+            # X authority
+            xhost +local:
+
+            # Clean x0vncserver args
+            ${pkgs.tigervnc}/bin/x0vncserver ${lib.concatStringsSep " " (map (arg: "${arg}") vncArgs)}
+          '';
+
+          preStop = ''
+            xhost -local:
+            pkill -f "x0vncserver.*${toString opts.port}"
+          '';
+
+          serviceConfig = {
+            Type = "simple";
+            Restart = "always";
+            RestartSec = "5s";
+            RuntimeDirectory = "vnc-${user}";
+          };
+        };
+      }
+    ) cfg.users;
+
+    networking.firewall.allowedTCPPorts =
+      lib.mapAttrsToList (_: opts: opts.port) cfg.users;
+  };
+}

systems/x86_64-linux/drivebystation-nix/video.nix

@@ -5,7 +5,7 @@
   ];
   
   boot.extraModulePackages = [
-    pkgs.linuxPackages.v4l2loopback # Webcam loopback
+    config.boot.kernelPackages.v4l2loopback # Webcam loopback
   ];
 
   boot.extraModprobeConfig = ''